From: Niklas Cassel <cassel@kernel.org>
To: Damien Le Moal <dlemoal@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] ahci: Introduce ahci_ignore_port() helper
Date: Tue, 7 Jan 2025 11:24:52 +0100 [thread overview]
Message-ID: <Z30A9OL8RInlg_Tn@ryzen> (raw)
In-Reply-To: <20250106052701.47246-1-dlemoal@kernel.org>
On Mon, Jan 06, 2025 at 02:27:01PM +0900, Damien Le Moal wrote:
> libahci and AHCI drivers may ignore some ports if the port is invalid
> (its ID does not correspond to a valid physical port) or if the user
> explicitly requested the port to be ignored with the mask_port_map
> ahci module parameter. Such port that shall be ignored can be identified
> by checking that the bit corresponding to the port ID is not set in the
> mask_port_map field of struct ahci_host_priv. E.g. code such as:
> "if (!(hpriv->mask_port_map & (1 << portid)))".
>
> Replace all direct use of the mask_port_map field to detect such port
> with the new helper inline function ahci_ignore_port() to make the code
> more readable/easier to understand.
>
> The comment describing the mask_port_map field of struct ahci_host_priv
> is also updated to be more accurate.
>
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
> ---
> drivers/ata/ahci.h | 13 ++++++++++++-
> drivers/ata/ahci_brcm.c | 2 +-
> drivers/ata/ahci_ceva.c | 4 ++--
> drivers/ata/libahci_platform.c | 6 +++---
> 4 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 8f40f75ba08c..aea30df50c58 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -328,7 +328,7 @@ struct ahci_port_priv {
> struct ahci_host_priv {
> /* Input fields */
> unsigned int flags; /* AHCI_HFLAG_* */
> - u32 mask_port_map; /* mask out particular bits */
> + u32 mask_port_map; /* Mask of valid ports */
>
> void __iomem * mmio; /* bus-independent mem map */
> u32 cap; /* cap to use */
> @@ -379,6 +379,17 @@ struct ahci_host_priv {
> int port);
> };
>
> +/*
> + * Return true if a port should be ignored because it is excluded from
> + * the host port map.
> + */
> +static inline bool ahci_ignore_port(struct ahci_host_priv *hpriv,
> + unsigned int portid)
> +{
> + return portid >= hpriv->nports ||
> + !(hpriv->mask_port_map & (1 << portid));
> +}
> +
> extern int ahci_ignore_sss;
>
> extern const struct attribute_group *ahci_shost_groups[];
> diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
> index 24c471b485ab..29be74fedcf0 100644
> --- a/drivers/ata/ahci_brcm.c
> +++ b/drivers/ata/ahci_brcm.c
> @@ -288,7 +288,7 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
>
> /* Re-initialize and calibrate the PHY */
> for (i = 0; i < hpriv->nports; i++) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> rc = phy_init(hpriv->phys[i]);
> diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
> index f2e20ed11ec7..2d6a08c23d6a 100644
> --- a/drivers/ata/ahci_ceva.c
> +++ b/drivers/ata/ahci_ceva.c
> @@ -206,7 +206,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
> goto disable_clks;
>
> for (i = 0; i < hpriv->nports; i++) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> rc = phy_init(hpriv->phys[i]);
> @@ -218,7 +218,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
> ahci_platform_deassert_rsts(hpriv);
>
> for (i = 0; i < hpriv->nports; i++) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> rc = phy_power_on(hpriv->phys[i]);
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index b68777841f7a..53b2c7719dc5 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -49,7 +49,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
> int rc, i;
>
> for (i = 0; i < hpriv->nports; i++) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> rc = phy_init(hpriv->phys[i]);
> @@ -73,7 +73,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
>
> disable_phys:
> while (--i >= 0) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> phy_power_off(hpriv->phys[i]);
> @@ -94,7 +94,7 @@ void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
> int i;
>
> for (i = 0; i < hpriv->nports; i++) {
> - if (!(hpriv->mask_port_map & (1 << i)))
> + if (ahci_ignore_port(hpriv, i))
> continue;
>
> phy_power_off(hpriv->phys[i]);
> --
> 2.47.1
>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
prev parent reply other threads:[~2025-01-07 10:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-06 5:27 [PATCH] ahci: Introduce ahci_ignore_port() helper Damien Le Moal
2025-01-07 10:24 ` Niklas Cassel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z30A9OL8RInlg_Tn@ryzen \
--to=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).