[PATCH v2 0/5] NCQ Priority sysfs sttributes for libsas

[PATCH v2 0/5] NCQ Priority sysfs sttributes for libsas

[Igor Pylypiv]

This patch series adds sas_ncq_prio_supported and sas_ncq_prio_enable
sysfs sttributes for libsas managed SATA devices. Existing libata sysfs
attributes cannot be used directly because the ata_port location is
different for libsas.

Changes since v1:
- Dropped the "sas_" prefix to align sysfs sttributes naming with AHCI.
- Dropped ternary operators to make the code more readable.
- Corrected the formatting %u -> %d in sysfs_emit().
- Changed kstrtol() to kstrtobool() in [ata|sas]_ncq_prio_enable_store().
- Changed comments to use the "/* */" style instead of "//".
- Added libsas SATA sysfs attributes to mvsas and hisi_sas.
- Dropped the 'Reviewed-by' tags because they were not sent in-reply
  to the patch emails.

Igor Pylypiv (5):
  ata: libata-sata: Factor out NCQ Priority configuration helpers
  scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices
  scsi: pm80xx: Add libsas SATA sysfs attributes group
  scsi: mvsas: Add libsas SATA sysfs attributes group
  scsi: hisi_sas: Add libsas SATA sysfs attributes group

 drivers/ata/libata-sata.c              | 139 ++++++++++++++++++-------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |   6 ++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |   6 ++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |   6 ++
 drivers/scsi/libsas/sas_ata.c          |  92 ++++++++++++++++
 drivers/scsi/mvsas/mv_init.c           |   7 ++
 drivers/scsi/pm8001/pm8001_ctl.c       |   5 +
 drivers/scsi/pm8001/pm8001_init.c      |   1 +
 drivers/scsi/pm8001/pm8001_sas.h       |   1 +
 include/linux/libata.h                 |   4 +
 include/scsi/sas_ata.h                 |   6 ++
 11 files changed, 233 insertions(+), 40 deletions(-)

-- 
2.44.0.278.ge034bb2e1d-goog

[PATCH v2 1/5] ata: libata-sata: Factor out NCQ Priority configuration helpers

[Igor Pylypiv]

Export libata NCQ Priority configuration helpers to be reused
for libsas managed SATA devices.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
---
 drivers/ata/libata-sata.c | 139 +++++++++++++++++++++++++++-----------
 include/linux/libata.h    |   4 ++
 2 files changed, 103 insertions(+), 40 deletions(-)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 0fb1934875f2..a8d5e36d5211 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -848,29 +848,73 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
+/**
+ *	ata_ncq_prio_supported - Check if device supports NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *
+ *	Helper to check if device supports NCQ Priority feature,
+ *	usable with both libsas and libata.
+ */
+int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev)
+{
+	struct ata_device *dev;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(ap->lock, flags);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev)
+		rc = -ENODEV;
+	else
+		rc = !!(dev->flags & ATA_DFLAG_NCQ_PRIO);
+	spin_unlock_irqrestore(ap->lock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_supported);
+
 static ssize_t ata_ncq_prio_supported_show(struct device *device,
 					   struct device_attribute *attr,
 					   char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(device);
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	int rc;
+
+	rc = ata_ncq_prio_supported(ap, sdev);
+	if (rc < 0)
+		return rc;
+
+	return sysfs_emit(buf, "%d\n", rc);
+}
+
+DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
+
+/**
+ *	ata_ncq_prio_enabled - Check if NCQ Priority is enabled
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *
+ *	Helper to check if NCQ Priority feature is enabled,
+ *	usable with both libsas and libata.
+ */
+int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev)
+{
 	struct ata_device *dev;
-	bool ncq_prio_supported;
-	int rc = 0;
+	unsigned long flags;
+	int rc;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
-	spin_unlock_irq(ap->lock);
-
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+		rc = !!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED);
+	spin_unlock_irqrestore(ap->lock, flags);
+	return rc;
 }
-
-DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
-EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled);
 
 static ssize_t ata_ncq_prio_enable_show(struct device *device,
 					struct device_attribute *attr,
@@ -878,50 +922,45 @@ static ssize_t ata_ncq_prio_enable_show(struct device *device,
 {
 	struct scsi_device *sdev = to_scsi_device(device);
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct ata_device *dev;
-	bool ncq_prio_enable;
-	int rc = 0;
+	int rc;
 
-	spin_lock_irq(ap->lock);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (!dev)
-		rc = -ENODEV;
-	else
-		ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
-	spin_unlock_irq(ap->lock);
+	rc = ata_ncq_prio_enabled(ap, sdev);
+	if (rc < 0)
+		return rc;
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable);
+	return sysfs_emit(buf, "%d\n", rc);
 }
 
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
-					 struct device_attribute *attr,
-					 const char *buf, size_t len)
+/**
+ *	ata_ncq_prio_enable - Enable/disable NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enable: true - enable NCQ Priority, false - disable NCQ Priority
+ *
+ *	Helper to enable/disable NCQ Priority feature, usable with both
+ *	libsas and libata.
+ */
+int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+			bool enable)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
 	struct ata_device *dev;
-	long int input;
+	unsigned long flags;
 	int rc = 0;
 
-	rc = kstrtol(buf, 10, &input);
-	if (rc)
-		return rc;
-	if ((input < 0) || (input > 1))
-		return -EINVAL;
+	spin_lock_irqsave(ap->lock, flags);
 
-	ap = ata_shost_to_port(sdev->host);
 	dev = ata_scsi_find_dev(ap, sdev);
-	if (unlikely(!dev))
-		return  -ENODEV;
-
-	spin_lock_irq(ap->lock);
+	if (unlikely(!dev)) {
+		rc = -ENODEV;
+		goto unlock;
+	}
 
 	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
 		rc = -EINVAL;
 		goto unlock;
 	}
 
-	if (input) {
+	if (enable) {
 		if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
 			ata_dev_err(dev,
 				"CDL must be disabled to enable NCQ priority\n");
@@ -934,9 +973,29 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
 	}
 
 unlock:
-	spin_unlock_irq(ap->lock);
+	spin_unlock_irqrestore(ap->lock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enable);
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enable;
+	int rc;
+
+	rc = kstrtobool(buf, &enable);
+	if (rc)
+		return rc;
+
+	rc = ata_ncq_prio_enable(ap, sdev, enable);
+	if (rc)
+		return rc;
 
-	return rc ? rc : len;
+	return len;
 }
 
 DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 26d68115afb8..f3ff2bf3ec6b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1157,6 +1157,10 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
 				       int queue_depth);
 extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
 				  int queue_depth);
+extern int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev);
+extern int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev);
+extern int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+			       bool enable);
 extern struct ata_device *ata_dev_pair(struct ata_device *adev);
 extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
 extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
-- 
2.44.0.278.ge034bb2e1d-goog

[PATCH v2 2/5] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices

[Igor Pylypiv]

Libata sysfs attributes cannot be used for libsas managed SATA devices
because the ata_port location is different for libsas.

Defined sysfs attributes (visible for SATA devices only):
- /sys/block/sda/device/ncq_prio_enable
- /sys/block/sda/device/ncq_prio_supported

The newly defined attributes will pass the correct ata_port to libata
helper functions.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
---
 drivers/scsi/libsas/sas_ata.c | 92 +++++++++++++++++++++++++++++++++++
 include/scsi/sas_ata.h        |  6 +++
 2 files changed, 98 insertions(+)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 12e2653846e3..e4d07134a0e4 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -964,3 +964,95 @@ int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id)
 			       force_phy_id, &tmf_task);
 }
 EXPORT_SYMBOL_GPL(sas_execute_ata_cmd);
+
+static ssize_t sas_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct domain_device *ddev = sdev_to_domain_dev(sdev);
+	int rc;
+
+	/* This attribute shall be visible for SATA devices only */
+	if (WARN_ON(!dev_is_sata(ddev)))
+		return -EINVAL;
+
+	rc = ata_ncq_prio_supported(ddev->sata_dev.ap, sdev);
+	if (rc < 0)
+		return rc;
+
+	return sysfs_emit(buf, "%d\n", rc);
+}
+
+DEVICE_ATTR(ncq_prio_supported, S_IRUGO, sas_ncq_prio_supported_show, NULL);
+
+static ssize_t sas_ncq_prio_enable_show(struct device *device,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct domain_device *ddev = sdev_to_domain_dev(sdev);
+	int rc;
+
+	/* This attribute shall be visible for SATA devices only */
+	if (WARN_ON(!dev_is_sata(ddev)))
+		return -EINVAL;
+
+	rc = ata_ncq_prio_enabled(ddev->sata_dev.ap, sdev);
+	if (rc < 0)
+		return rc;
+
+	return sysfs_emit(buf, "%d\n", rc);
+}
+
+static ssize_t sas_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct domain_device *ddev = sdev_to_domain_dev(sdev);
+	bool enable;
+	int rc;
+
+	/* This attribute shall be visible for SATA devices only */
+	if (WARN_ON(!dev_is_sata(ddev)))
+		return -EINVAL;
+
+	rc = kstrtobool(buf, &enable);
+	if (rc)
+		return rc;
+
+	rc = ata_ncq_prio_enable(ddev->sata_dev.ap, sdev, enable);
+	if (rc)
+		return rc;
+
+	return len;
+}
+
+DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
+	    sas_ncq_prio_enable_show, sas_ncq_prio_enable_store);
+
+static struct attribute *sas_ata_sdev_attrs[] = {
+	&dev_attr_ncq_prio_supported.attr,
+	&dev_attr_ncq_prio_enable.attr,
+	NULL
+};
+
+static umode_t sas_ata_attr_is_visible(struct kobject *kobj,
+				       struct attribute *attr, int i)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct domain_device *ddev = sdev_to_domain_dev(sdev);
+
+	if (!dev_is_sata(ddev))
+		return 0;
+
+	return attr->mode;
+}
+
+const struct attribute_group sas_ata_sdev_attr_group = {
+	.attrs = sas_ata_sdev_attrs,
+	.is_visible = sas_ata_attr_is_visible,
+};
+EXPORT_SYMBOL_GPL(sas_ata_sdev_attr_group);
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index 2f8c719840a6..cded782fdf33 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -39,6 +39,8 @@ int smp_ata_check_ready_type(struct ata_link *link);
 int sas_discover_sata(struct domain_device *dev);
 int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
 		    struct domain_device *child, int phy_id);
+
+extern const struct attribute_group sas_ata_sdev_attr_group;
 #else
 
 static inline void sas_ata_disabled_notice(void)
@@ -123,6 +125,10 @@ static inline int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *p
 	sas_ata_disabled_notice();
 	return -ENODEV;
 }
+
+static const struct attribute_group sas_ata_sdev_attr_group = {
+	.attrs = NULL,
+};
 #endif
 
 #endif /* _SAS_ATA_H_ */
-- 
2.44.0.278.ge034bb2e1d-goog

[PATCH v2 3/5] scsi: pm80xx: Add libsas SATA sysfs attributes group

[Igor Pylypiv]

The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
---
 drivers/scsi/pm8001/pm8001_ctl.c  | 5 +++++
 drivers/scsi/pm8001/pm8001_init.c | 1 +
 drivers/scsi/pm8001/pm8001_sas.h  | 1 +
 3 files changed, 7 insertions(+)

diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 5c26a13ffbd2..9ffe1a868d0f 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -1039,3 +1039,8 @@ const struct attribute_group *pm8001_host_groups[] = {
 	&pm8001_host_attr_group,
 	NULL
 };
+
+const struct attribute_group *pm8001_sdev_groups[] = {
+	&sas_ata_sdev_attr_group,
+	NULL
+};
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index ed6b7d954dda..e6b1108f6117 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -134,6 +134,7 @@ static const struct scsi_host_template pm8001_sht = {
 	.compat_ioctl		= sas_ioctl,
 #endif
 	.shost_groups		= pm8001_host_groups,
+	.sdev_groups		= pm8001_sdev_groups,
 	.track_queue_depth	= 1,
 	.cmd_per_lun		= 32,
 	.map_queues		= pm8001_map_queues,
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 3ccb7371902f..ced6721380a8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -717,6 +717,7 @@ int pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha);
 void pm8001_free_dev(struct pm8001_device *pm8001_dev);
 /* ctl shared API */
 extern const struct attribute_group *pm8001_host_groups[];
+extern const struct attribute_group *pm8001_sdev_groups[];
 
 #define PM8001_INVALID_TAG	((u32)-1)
 
-- 
2.44.0.278.ge034bb2e1d-goog

[PATCH v2 4/5] scsi: mvsas: Add libsas SATA sysfs attributes group

[Igor Pylypiv]

The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
---
 drivers/scsi/mvsas/mv_init.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 43ebb331e216..80cbe030ac53 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -26,6 +26,7 @@ static const struct mvs_chip_info mvs_chips[] = {
 };
 
 static const struct attribute_group *mvst_host_groups[];
+static const struct attribute_group *mvst_sdev_groups[];
 
 #define SOC_SAS_NUM 2
 
@@ -53,6 +54,7 @@ static const struct scsi_host_template mvs_sht = {
 	.compat_ioctl		= sas_ioctl,
 #endif
 	.shost_groups		= mvst_host_groups,
+	.sdev_groups		= mvst_sdev_groups,
 	.track_queue_depth	= 1,
 };
 
@@ -779,6 +781,11 @@ static struct attribute *mvst_host_attrs[] = {
 
 ATTRIBUTE_GROUPS(mvst_host);
 
+static const struct attribute_group *mvst_sdev_groups[] = {
+	&sas_ata_sdev_attr_group,
+	NULL,
+};
+
 module_init(mvs_init);
 module_exit(mvs_exit);
 
-- 
2.44.0.278.ge034bb2e1d-goog

[PATCH v2 5/5] scsi: hisi_sas: Add libsas SATA sysfs attributes group

[Igor Pylypiv]

The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 ++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 6 ++++++
 3 files changed, 18 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3c555579f9a1..97864b56a71f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1734,6 +1734,11 @@ static struct attribute *host_v1_hw_attrs[] = {
 
 ATTRIBUTE_GROUPS(host_v1_hw);
 
+static const struct attribute_group *sdev_groups_v1_hw[] = {
+	&sas_ata_sdev_attr_group,
+	NULL
+};
+
 static const struct scsi_host_template sht_v1_hw = {
 	.name			= DRV_NAME,
 	.proc_name		= DRV_NAME,
@@ -1758,6 +1763,7 @@ static const struct scsi_host_template sht_v1_hw = {
 	.compat_ioctl		= sas_ioctl,
 #endif
 	.shost_groups		= host_v1_hw_groups,
+	.sdev_groups		= sdev_groups_v1_hw,
 	.host_reset             = hisi_sas_host_reset,
 };
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 73b378837da7..b5d379ebe05d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3544,6 +3544,11 @@ static struct attribute *host_v2_hw_attrs[] = {
 
 ATTRIBUTE_GROUPS(host_v2_hw);
 
+static const struct attribute_group *sdev_groups_v2_hw[] = {
+	&sas_ata_sdev_attr_group,
+	NULL
+};
+
 static void map_queues_v2_hw(struct Scsi_Host *shost)
 {
 	struct hisi_hba *hisi_hba = shost_priv(shost);
@@ -3585,6 +3590,7 @@ static const struct scsi_host_template sht_v2_hw = {
 	.compat_ioctl		= sas_ioctl,
 #endif
 	.shost_groups		= host_v2_hw_groups,
+	.sdev_groups		= sdev_groups_v2_hw,
 	.host_reset		= hisi_sas_host_reset,
 	.map_queues		= map_queues_v2_hw,
 	.host_tagset		= 1,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index b56fbc61a15a..9b69ea16a1e6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2929,6 +2929,11 @@ static struct attribute *host_v3_hw_attrs[] = {
 
 ATTRIBUTE_GROUPS(host_v3_hw);
 
+static const struct attribute_group *sdev_groups_v3_hw[] = {
+	&sas_ata_sdev_attr_group,
+	NULL
+};
+
 #define HISI_SAS_DEBUGFS_REG(x) {#x, x}
 
 struct hisi_sas_debugfs_reg_lu {
@@ -3340,6 +3345,7 @@ static const struct scsi_host_template sht_v3_hw = {
 	.compat_ioctl		= sas_ioctl,
 #endif
 	.shost_groups		= host_v3_hw_groups,
+	.sdev_groups		= sdev_groups_v3_hw,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
 	.host_reset             = hisi_sas_host_reset,
 	.host_tagset		= 1,
-- 
2.44.0.278.ge034bb2e1d-goog

Re: [PATCH v2 5/5] scsi: hisi_sas: Add libsas SATA sysfs attributes group

[Jason Yan]

On 2024/3/2 8:16, Igor Pylypiv wrote:
> The added sysfs attributes group enables the configuration of NCQ Priority
> feature for HBAs that rely on libsas to manage SATA devices.
> 
> Signed-off-by: Igor Pylypiv<ipylypiv@google.com>
> ---
>   drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 ++++++
>   drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ++++++
>   drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 6 ++++++
>   3 files changed, 18 insertions(+)

As John pointed out, please check aic94xx and isci driver, they also use 
libsas.

Thanks,
Jason

Re: [PATCH v2 5/5] scsi: hisi_sas: Add libsas SATA sysfs attributes group

[Igor Pylypiv]

On Sat, Mar 02, 2024 at 10:54:14AM +0800, Jason Yan wrote:
> On 2024/3/2 8:16, Igor Pylypiv wrote:
> > The added sysfs attributes group enables the configuration of NCQ Priority
> > feature for HBAs that rely on libsas to manage SATA devices.
> > 
> > Signed-off-by: Igor Pylypiv<ipylypiv@google.com>
> > ---
> >   drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 ++++++
> >   drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 6 ++++++
> >   drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 6 ++++++
> >   3 files changed, 18 insertions(+)
> 
> As John pointed out, please check aic94xx and isci driver, they also use
> libsas.

Thank you, Jason. I wasn't sure about these drivers. Added in v3.

Thanks,
Igor

> 
> Thanks,
> Jason