Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Thomas Gleixner]

Tim!

On Tue, May 28 2024 at 17:43, Tim Teichmann wrote:
> On 24/05/27 07:17pm, Thomas Gleixner wrote:
> I've just tested the fix you've provided in the previous email.
> The exact patches are attached to the ticket in the archlinux bugtracker[0].

Thanks! I will write a proper changelog and ship it.

> The error regarding CPU scheduling disappeared for both kernel verions[0].
> However, the ATA bus error still occurs.
>
> Also, I suppose that the ATA bus error is the same as the previous one,
> because the only value that changes in the exception message is SAct.
>
> This is the message of the ATA error before the patch:
>
>> > May 23 23:36:49 archlinux kernel: smpboot: x86: Booting SMP configuration:
>> > May 23 23:36:49 archlinux kernel: .... node  #0, CPUs:      #2 #4 #6
>> > May 23 23:36:49 archlinux kernel: __common_interrupt: 2.55 No irq handler for vector
>> > May 23 23:36:49 archlinux kernel: __common_interrupt: 4.55 No irq handler for vector
>> > May 23 23:36:49 archlinux kernel: __common_interrupt: 6.55 No irq handler for vector
>> >
>> > ATA stuff:
>> >
>> > May 23 23:36:59 archlinux kernel: ata2.00: exception Emask 0x10 SAct 0x1fffe000 SErr 0x40d0002 action 0xe frozen
>> 
>> That's probably just the fallout of the above.

It's in reality not related and I saw some other AHCI fallout fly by.

> And that's the message after the patch:
>
> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
>
> The full dmesg outputs are in the attachments.

Cc'ed the AHCI people and left the info around for them.

> Thank you,
> Tim
>
>
> [0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56#note_188563
> [    0.000000] Linux version 6.9.2-arch1-1.2 (linux@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 18:36:31 +0000
> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
> [    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] APIC: Static calls initialized
> [    0.000000] SMBIOS 2.4 present.
> [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017
> [    0.000000] tsc: Fast TSC calibration using PIT
> [    0.000000] tsc: Detected 3322.271 MHz processor
> [    0.002937] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.002941] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.002947] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
> [    0.002956] total RAM covered: 3070M
> [    0.003253] Found optimal setting for mtrr clean up
> [    0.003254]  gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
> [    0.003260] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs
> [    0.003262] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
> [    0.004111] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
> [    0.004120] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
> [    0.007030] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
> [    0.007051] Using GB pages for direct mapping
> [    0.007376] RAMDISK: [mem 0x31c9f000-0x34e46fff]
> [    0.007499] ACPI: Early table checksum verification disabled
> [    0.007504] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT   )
> [    0.007508] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007515] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007521] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
> [    0.007526] ACPI: FACS 0x00000000BFDF0000 000040
> [    0.007529] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007534] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
> [    0.007538] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007542] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT    GBT   B0 5455312E BG?? 00000101)
> [    0.007546] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007551] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
> [    0.007554] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3]
> [    0.007556] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6]
> [    0.007558] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f]
> [    0.007559] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14]
> [    0.007560] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77]
> [    0.007561] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb]
> [    0.007562] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1]
> [    0.007564] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb]
> [    0.007565] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473]
> [    0.007628] No NUMA configuration found
> [    0.007629] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
> [    0.007632] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff]
> [    0.007673] Zone ranges:
> [    0.007674]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
> [    0.007677]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
> [    0.007678]   Normal   [mem 0x0000000100000000-0x000000043effffff]
> [    0.007680]   Device   empty
> [    0.007682] Movable zone start for each node
> [    0.007682] Early memory node ranges
> [    0.007683]   node   0: [mem 0x0000000000001000-0x000000000009efff]
> [    0.007685]   node   0: [mem 0x0000000000100000-0x00000000bfdeffff]
> [    0.007686]   node   0: [mem 0x0000000100000000-0x000000043effffff]
> [    0.007689] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
> [    0.007695] On node 0, zone DMA: 1 pages in unavailable ranges
> [    0.007735] On node 0, zone DMA: 97 pages in unavailable ranges
> [    0.054266] On node 0, zone Normal: 528 pages in unavailable ranges
> [    0.054340] On node 0, zone Normal: 4096 pages in unavailable ranges
> [    0.054523] ACPI: PM-Timer IO Port: 0x4008
> [    0.054534] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> [    0.054536] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> [    0.054537] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> [    0.054539] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> [    0.054540] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
> [    0.054541] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
> [    0.054542] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
> [    0.054543] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
> [    0.054556] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> [    0.054559] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.054561] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [    0.054566] ACPI: Using ACPI (MADT) for SMP configuration information
> [    0.054567] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> [    0.054577] CPU topo: Max. logical packages:   1
> [    0.054578] CPU topo: Max. logical dies:       1
> [    0.054579] CPU topo: Max. dies per package:   1
> [    0.054584] CPU topo: Max. threads per core:   1
> [    0.054585] CPU topo: Num. cores per package:     8
> [    0.054586] CPU topo: Num. threads per package:   8
> [    0.054587] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
> [    0.054599] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [    0.054601] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [    0.054602] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [    0.054604] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [    0.054605] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
> [    0.054606] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
> [    0.054607] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
> [    0.054608] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
> [    0.054609] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
> [    0.054610] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
> [    0.054611] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
> [    0.054613] [mem 0xbff00000-0xdfffffff] available for PCI devices
> [    0.054615] Booting paravirtualized kernel on bare hardware
> [    0.054618] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
> [    0.060537] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> [    0.061434] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
> [    0.061443] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
> [    0.061446] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
> [    0.061468] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
> [    0.061547] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
> [    0.064351] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [    0.065732] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> [    0.065812] Fallback order for Node 0: 0 
> [    0.065818] Built 1 zonelists, mobility grouping on.  Total pages: 4123960
> [    0.065820] Policy zone: Normal
> [    0.066244] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
> [    0.066251] software IO TLB: area num 8.
> [    0.151668] Memory: 16301808K/16758328K available (18432K kernel code, 2164K rwdata, 13296K rodata, 3412K init, 3624K bss, 456260K reserved, 0K cma-reserved)
> [    0.159910] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [    0.160107] ftrace: allocating 49852 entries in 195 pages
> [    0.171323] ftrace: allocated 195 pages with 4 groups
> [    0.171486] Dynamic Preempt: full
> [    0.171715] rcu: Preemptible hierarchical RCU implementation.
> [    0.171717] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
> [    0.171718] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
> [    0.171720] 	Trampoline variant of Tasks RCU enabled.
> [    0.171720] 	Rude variant of Tasks RCU enabled.
> [    0.171721] 	Tracing variant of Tasks RCU enabled.
> [    0.171722] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
> [    0.171723] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
> [    0.171731] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.171734] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.171736] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.177324] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
> [    0.177539] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [    0.177631] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
> [    0.177707] spurious 8259A interrupt: IRQ7.
> [    0.177727] Console: colour dummy device 80x25
> [    0.177730] printk: legacy console [tty0] enabled
> [    0.178132] ACPI: Core revision 20230628
> [    0.178358] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
> [    0.178391] APIC: Switch to symmetric I/O mode setup
> [    0.178896] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.195044] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe37b0bf9a, max_idle_ns: 440795315222 ns
> [    0.195049] Calibrating delay loop (skipped), value calculated using timer frequency.. 6647.39 BogoMIPS (lpj=11074236)
> [    0.195073] LVT offset 1 assigned for vector 0xf9
> [    0.195078] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
> [    0.195079] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
> [    0.195084] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [    0.195087] Spectre V2 : Mitigation: Retpolines
> [    0.195088] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [    0.195089] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
> [    0.195090] Spectre V2 : Enabling Speculation Barrier for firmware calls
> [    0.195091] RETBleed: Mitigation: untrained return thunk
> [    0.195093] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [    0.195095] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [    0.195099] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [    0.195101] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [    0.195102] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [    0.195104] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
> [    0.195106] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
> [    0.218738] Freeing SMP alternatives memory: 40K
> [    0.218744] pid_max: default: 32768 minimum: 301
> [    0.219474] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
> [    0.220315] landlock: Up and running.
> [    0.220317] Yama: becoming mindful.
> [    0.220324] LSM support for eBPF active
> [    0.220571] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [    0.220611] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [    0.228515] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms
> [    0.228521] APIC delta adjusted to PM-Timer: 1261600 (1512)
> [    0.228531] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
> [    0.228924] Performance Events: Fam15h core perfctr, AMD PMU driver.
> [    0.228930] ... version:                0
> [    0.228931] ... bit width:              48
> [    0.228932] ... generic registers:      6
> [    0.228933] ... value mask:             0000ffffffffffff
> [    0.228934] ... max period:             00007fffffffffff
> [    0.228936] ... fixed-purpose events:   0
> [    0.228936] ... event mask:             000000000000003f
> [    0.229048] signal: max sigframe size: 1776
> [    0.229102] rcu: Hierarchical SRCU implementation.
> [    0.229104] rcu: 	Max phase no-delay instances is 1000.
> [    0.231414] MCE: In-kernel MCE decoding enabled.
> [    0.231495] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [    0.231629] smp: Bringing up secondary CPUs ...
> [    0.231713] smpboot: x86: Booting SMP configuration:
> [    0.231713] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
> [    0.000815] __common_interrupt: 1.55 No irq handler for vector
> [    0.000815] __common_interrupt: 2.55 No irq handler for vector
> [    0.000815] __common_interrupt: 3.55 No irq handler for vector
> [    0.000815] __common_interrupt: 4.55 No irq handler for vector
> [    0.000815] __common_interrupt: 5.55 No irq handler for vector
> [    0.000815] __common_interrupt: 6.55 No irq handler for vector
> [    0.000815] __common_interrupt: 7.55 No irq handler for vector
> [    0.262715] smp: Brought up 1 node, 8 CPUs
> [    0.262715] smpboot: Total of 8 processors activated (53177.18 BogoMIPS)
> [    0.266086] devtmpfs: initialized
> [    0.266086] x86/mm: Memory block size: 128MB
> [    0.269083] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
> [    0.269083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
> [    0.269083] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
> [    0.269083] pinctrl core: initialized pinctrl subsystem
> [    0.269108] PM: RTC time: 14:51:09, date: 2024-05-28
> [    0.269538] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [    0.269947] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
> [    0.270211] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [    0.270526] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [    0.270538] audit: initializing netlink subsys (disabled)
> [    0.271744] audit: type=2000 audit(1716907868.096:1): state=initialized audit_enabled=0 res=1
> [    0.271862] thermal_sys: Registered thermal governor 'fair_share'
> [    0.271864] thermal_sys: Registered thermal governor 'bang_bang'
> [    0.271866] thermal_sys: Registered thermal governor 'step_wise'
> [    0.271867] thermal_sys: Registered thermal governor 'user_space'
> [    0.271868] thermal_sys: Registered thermal governor 'power_allocator'
> [    0.271881] cpuidle: using governor ladder
> [    0.271881] cpuidle: using governor menu
> [    0.271881] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.272117] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
> [    0.272122] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry
> [    0.272140] PCI: Using configuration type 1 for base access
> [    0.272340] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [    0.275131] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
> [    0.275131] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
> [    0.275131] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> [    0.275131] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> [    0.275140] Demotion targets for Node 0: null
> [    0.275248] fbcon: Taking over console
> [    0.275248] ACPI: Added _OSI(Module Device)
> [    0.275248] ACPI: Added _OSI(Processor Device)
> [    0.275248] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.275248] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.278535] ACPI: 2 ACPI AML tables successfully acquired and loaded
> [    0.278811] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278818] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278824] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278830] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278842] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278848] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278854] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278859] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278871] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278877] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278882] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278888] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278899] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278905] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278910] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278916] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278927] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278933] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278938] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278944] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278955] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278961] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.278966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278972] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278983] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.278989] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.278994] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.278999] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.279021] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.279026] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.279038] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.279043] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.279049] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.279054] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.279065] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
> [    0.279071] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
> [    0.279076] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
> [    0.279082] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
> [    0.285252] ACPI: _OSC evaluation for CPUs failed, trying _PDC
> [    0.285324] ACPI: Interpreter enabled
> [    0.285345] ACPI: PM: (supports S0 S3 S4 S5)
> [    0.285347] ACPI: Using IOAPIC for interrupt routing
> [    0.285667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.285669] PCI: Using E820 reservations for host bridge windows
> [    0.285824] ACPI: Enabled 5 GPEs in block 00 to 1F
> [    0.291427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [    0.291435] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
> [    0.291811] PCI host bridge to bus 0000:00
> [    0.291814] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
> [    0.291817] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
> [    0.291819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
> [    0.291822] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
> [    0.291824] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    0.291842] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint
> [    0.291854] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
> [    0.291930] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port
> [    0.291943] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.291947] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
> [    0.291950] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
> [    0.291955] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.291961] pci 0000:00:02.0: enabling Extended Tags
> [    0.291989] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [    0.292095] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port
> [    0.292108] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.292112] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
> [    0.292115] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
> [    0.292120] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.292126] pci 0000:00:04.0: enabling Extended Tags
> [    0.292152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
> [    0.292253] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port
> [    0.292266] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.292270] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
> [    0.292272] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
> [    0.292277] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.292283] pci 0000:00:06.0: enabling Extended Tags
> [    0.292309] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [    0.292433] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint
> [    0.292450] pci 0000:00:11.0: BAR 0 [io  0xff00-0xff07]
> [    0.292460] pci 0000:00:11.0: BAR 1 [io  0xfe00-0xfe03]
> [    0.292469] pci 0000:00:11.0: BAR 2 [io  0xfd00-0xfd07]
> [    0.292478] pci 0000:00:11.0: BAR 3 [io  0xfc00-0xfc03]
> [    0.292487] pci 0000:00:11.0: BAR 4 [io  0xfb00-0xfb0f]
> [    0.292497] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff]
> [    0.292518] pci 0000:00:11.0: set SATA to AHCI mode
> [    0.292622] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.292639] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff]
> [    0.292770] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.292787] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff]
> [    0.292927] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
> [    0.292944] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff]
> [    0.293023] pci 0000:00:12.2: supports D1 D2
> [    0.293025] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
> [    0.293112] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.293129] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff]
> [    0.293258] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.293275] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff]
> [    0.293409] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
> [    0.293426] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff]
> [    0.293506] pci 0000:00:13.2: supports D1 D2
> [    0.293508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
> [    0.293602] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
> [    0.293762] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
> [    0.293778] pci 0000:00:14.1: BAR 0 [io  0x0000-0x0007]
> [    0.293788] pci 0000:00:14.1: BAR 1 [io  0x0000-0x0003]
> [    0.293797] pci 0000:00:14.1: BAR 2 [io  0x0000-0x0007]
> [    0.293806] pci 0000:00:14.1: BAR 3 [io  0x0000-0x0003]
> [    0.293815] pci 0000:00:14.1: BAR 4 [io  0xfa00-0xfa0f]
> [    0.293835] pci 0000:00:14.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
> [    0.293837] pci 0000:00:14.1: BAR 1 [io  0x03f6]: legacy IDE quirk
> [    0.293838] pci 0000:00:14.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
> [    0.293840] pci 0000:00:14.1: BAR 3 [io  0x0376]: legacy IDE quirk
> [    0.293949] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
> [    0.293971] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit]
> [    0.294037] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> [    0.294116] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
> [    0.294285] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
> [    0.294316] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
> [    0.294321] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
> [    0.294325] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
> [    0.294331] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
> [    0.294416] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.294433] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff]
> [    0.294564] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint
> [    0.294614] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint
> [    0.294661] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint
> [    0.294710] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint
> [    0.294759] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint
> [    0.294808] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint
> [    0.294917] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint
> [    0.294930] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
> [    0.294941] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.294952] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref]
> [    0.294960] pci 0000:01:00.0: BAR 5 [io  0xef00-0xef7f]
> [    0.294967] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref]
> [    0.294995] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [    0.295075] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
> [    0.295151] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
> [    0.295165] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff]
> [    0.295315] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.295357] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
> [    0.295372] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit]
> [    0.295433] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.295503] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.295552] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
> [    0.295568] pci 0000:03:00.0: BAR 0 [io  0xce00-0xceff]
> [    0.295589] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit]
> [    0.295602] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref]
> [    0.295684] pci 0000:03:00.0: supports D1 D2
> [    0.295685] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.295808] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.295824] pci_bus 0000:04: extended config space not accessible
> [    0.295886] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
> [    0.295895] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
> [    0.295897] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
> [    0.295900] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
> [    0.295902] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
> [    0.296188] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
> [    0.296190] ACPI: PCI: Interrupt link LNKA disabled
> [    0.296247] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
> [    0.296249] ACPI: PCI: Interrupt link LNKB disabled
> [    0.296306] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
> [    0.296308] ACPI: PCI: Interrupt link LNKC disabled
> [    0.296363] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
> [    0.296365] ACPI: PCI: Interrupt link LNKD disabled
> [    0.296421] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
> [    0.296422] ACPI: PCI: Interrupt link LNKE disabled
> [    0.296477] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
> [    0.296479] ACPI: PCI: Interrupt link LNKF disabled
> [    0.296535] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
> [    0.296536] ACPI: PCI: Interrupt link LNK0 disabled
> [    0.296591] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
> [    0.296592] ACPI: PCI: Interrupt link LNK1 disabled
> [    0.298404] iommu: Default domain type: Translated
> [    0.298404] iommu: DMA domain TLB invalidation policy: lazy mode
> [    0.298664] SCSI subsystem initialized
> [    0.298672] libata version 3.00 loaded.
> [    0.298672] ACPI: bus type USB registered
> [    0.298672] usbcore: registered new interface driver usbfs
> [    0.298672] usbcore: registered new interface driver hub
> [    0.298672] usbcore: registered new device driver usb
> [    0.298672] EDAC MC: Ver: 3.0.0
> [    0.299557] NetLabel: Initializing
> [    0.299557] NetLabel:  domain hash size = 128
> [    0.299557] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> [    0.299557] NetLabel:  unlabeled traffic allowed by default
> [    0.299557] mctp: management component transport protocol core
> [    0.299557] NET: Registered PF_MCTP protocol family
> [    0.299557] PCI: Using ACPI for IRQ routing
> [    0.306688] PCI: pci_cache_line_size set to 64 bytes
> [    0.306740] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
> [    0.306743] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff]
> [    0.306744] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
> [    0.308426] pci 0000:01:00.0: vgaarb: setting as boot VGA device
> [    0.308426] pci 0000:01:00.0: vgaarb: bridge control possible
> [    0.308426] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [    0.308426] vgaarb: loaded
> [    0.308429] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [    0.308434] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> [    0.311840] clocksource: Switched to clocksource tsc-early
> [    0.313225] VFS: Disk quotas dquot_6.6.0
> [    0.313287] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    0.313388] pnp: PnP ACPI init
> [    0.313472] system 00:00: [io  0x04d0-0x04d1] has been reserved
> [    0.313475] system 00:00: [io  0x0220-0x0225] has been reserved
> [    0.313478] system 00:00: [io  0x0290-0x0294] has been reserved
> [    0.313783] system 00:01: [io  0x4100-0x411f] has been reserved
> [    0.313790] system 00:01: [io  0x0228-0x022f] has been reserved
> [    0.313793] system 00:01: [io  0x040b] has been reserved
> [    0.313795] system 00:01: [io  0x04d6] has been reserved
> [    0.313797] system 00:01: [io  0x0c00-0x0c01] has been reserved
> [    0.313799] system 00:01: [io  0x0c14] has been reserved
> [    0.313801] system 00:01: [io  0x0c50-0x0c52] has been reserved
> [    0.313803] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
> [    0.313805] system 00:01: [io  0x0c6f] has been reserved
> [    0.313807] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
> [    0.313809] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
> [    0.313810] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
> [    0.313812] system 00:01: [io  0x4000-0x40fe] has been reserved
> [    0.313814] system 00:01: [io  0x4210-0x4217] has been reserved
> [    0.313816] system 00:01: [io  0x0b00-0x0b0f] has been reserved
> [    0.313818] system 00:01: [io  0x0b10-0x0b1f] has been reserved
> [    0.313820] system 00:01: [io  0x0b20-0x0b3f] has been reserved
> [    0.313822] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved
> [    0.313825] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
> [    0.314737] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
> [    0.314963] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
> [    0.314986] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
> [    0.314989] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
> [    0.314991] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
> [    0.314993] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
> [    0.314996] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
> [    0.314998] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
> [    0.315000] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved
> [    0.315003] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved
> [    0.315005] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved
> [    0.315007] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
> [    0.315009] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
> [    0.315011] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
> [    0.315035] pnp: PnP ACPI: found 7 devices
> [    0.321759] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [    0.322043] NET: Registered PF_INET protocol family
> [    0.322351] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [    0.339864] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
> [    0.339910] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [    0.340073] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [    0.340507] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [    0.340824] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.341042] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
> [    0.341169] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [    0.341254] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [    0.341355] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [    0.341370] NET: Registered PF_XDP protocol family
> [    0.341386] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.341391] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
> [    0.341395] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
> [    0.341398] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.341403] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.341405] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
> [    0.341408] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
> [    0.341411] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.341414] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.341417] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
> [    0.341419] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
> [    0.341422] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.341426] pci 0000:00:14.4: PCI bridge to [bus 04]
> [    0.341429] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
> [    0.341434] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
> [    0.341438] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
> [    0.341445] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
> [    0.341447] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
> [    0.341449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
> [    0.341452] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
> [    0.341454] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
> [    0.341456] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
> [    0.341457] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.341459] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
> [    0.341461] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
> [    0.341463] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.341465] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
> [    0.341467] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
> [    0.341469] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.341471] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
> [    0.341473] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
> [    0.341474] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
> [    0.341476] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
> [    0.341478] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
> [    0.341480] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
> [    0.341482] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
> [    0.364641] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 22551 usecs
> [    0.384684] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 19559 usecs
> [    0.404731] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 19371 usecs
> [    0.424781] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 19569 usecs
> [    0.444850] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 19381 usecs
> [    0.444885] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
> [    0.444921] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
> [    0.445120] PCI: CLS 64 bytes, default 64
> [    0.445128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.445129] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB)
> [    0.445171] LVT offset 0 assigned for vector 0x400
> [    0.445205] Trying to unpack rootfs image as initramfs...
> [    0.449662] perf: AMD IBS detected (0x000000ff)
> [    0.451294] Initialise system trusted keyrings
> [    0.451307] Key type blacklist registered
> [    0.451387] workingset: timestamp_bits=41 max_order=22 bucket_order=0
> [    0.451400] zbud: loaded
> [    0.451792] fuse: init (API version 7.40)
> [    0.452284] integrity: Platform Keyring initialized
> [    0.452291] integrity: Machine keyring initialized
> [    0.467117] Key type asymmetric registered
> [    0.467119] Asymmetric key parser 'x509' registered
> [    0.467204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [    0.467299] io scheduler mq-deadline registered
> [    0.467301] io scheduler kyber registered
> [    0.467357] io scheduler bfq registered
> [    0.468354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [    0.468472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [    0.468506] ACPI: button: Power Button [PWRB]
> [    0.468558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [    0.470399] ACPI: button: Power Button [PWRF]
> [    0.470470] ACPI: \_PR_.C000: Found 2 idle states
> [    0.470564] ACPI: \_PR_.C001: Found 2 idle states
> [    0.470635] ACPI: \_PR_.C002: Found 2 idle states
> [    0.470712] ACPI: \_PR_.C003: Found 2 idle states
> [    0.470792] ACPI: \_PR_.C004: Found 2 idle states
> [    0.470863] ACPI: \_PR_.C005: Found 2 idle states
> [    0.470937] ACPI: \_PR_.C006: Found 2 idle states
> [    0.471006] ACPI: \_PR_.C007: Found 2 idle states
> [    0.471398] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [    0.471585] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [    0.474648] Non-volatile memory driver v1.3
> [    0.474650] Linux agpgart interface v0.103
> [    0.474750] ACPI: bus type drm_connector registered
> [    0.475607] ahci 0000:00:11.0: version 3.0
> [    0.475894] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
> [    0.475900] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf)
> [    0.475903] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
> [    0.476572] scsi host0: ahci
> [    0.476799] scsi host1: ahci
> [    0.476957] scsi host2: ahci
> [    0.477175] scsi host3: ahci
> [    0.477232] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3
> [    0.477236] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3
> [    0.477239] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3
> [    0.477242] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3
> [    0.477489] ohci-pci 0000:00:12.0: OHCI PCI host controller
> [    0.477498] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
> [    0.477543] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
> [    0.536033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
> [    0.536046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.536053] usb usb1: Product: OHCI PCI host controller
> [    0.536058] usb usb1: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
> [    0.536063] usb usb1: SerialNumber: 0000:00:12.0
> [    0.536600] hub 1-0:1.0: USB hub found
> [    0.536614] hub 1-0:1.0: 3 ports detected
> [    0.537585] ehci-pci 0000:00:12.2: EHCI Host Controller
> [    0.537618] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
> [    0.537631] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [    0.537651] ehci-pci 0000:00:12.2: debug port 1
> [    0.537772] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
> [    0.540855] Freeing initrd memory: 50848K
> [    0.548534] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [    0.548672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> [    0.548675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.548677] usb usb2: Product: EHCI Host Controller
> [    0.548679] usb usb2: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd
> [    0.548680] usb usb2: SerialNumber: 0000:00:12.2
> [    0.548923] hub 2-0:1.0: USB hub found
> [    0.548931] hub 2-0:1.0: 6 ports detected
> [    0.615460] hub 1-0:1.0: USB hub found
> [    0.615471] hub 1-0:1.0: 3 ports detected
> [    0.615594] ehci-pci 0000:00:13.2: EHCI Host Controller
> [    0.615599] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
> [    0.615603] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [    0.615614] ehci-pci 0000:00:13.2: debug port 1
> [    0.615676] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
> [    0.628733] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [    0.628840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> [    0.628843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.628845] usb usb3: Product: EHCI Host Controller
> [    0.628846] usb usb3: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd
> [    0.628848] usb usb3: SerialNumber: 0000:00:13.2
> [    0.629065] hub 3-0:1.0: USB hub found
> [    0.629079] hub 3-0:1.0: 6 ports detected
> [    0.629268] ohci-pci 0000:00:12.1: OHCI PCI host controller
> [    0.629273] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
> [    0.629292] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
> [    0.689602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
> [    0.689606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.689608] usb usb4: Product: OHCI PCI host controller
> [    0.689610] usb usb4: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
> [    0.689611] usb usb4: SerialNumber: 0000:00:12.1
> [    0.689768] hub 4-0:1.0: USB hub found
> [    0.689778] hub 4-0:1.0: 3 ports detected
> [    0.690103] ohci-pci 0000:00:13.0: OHCI PCI host controller
> [    0.690108] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
> [    0.690144] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
> [    0.749775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
> [    0.749779] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.749782] usb usb5: Product: OHCI PCI host controller
> [    0.749783] usb usb5: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
> [    0.749785] usb usb5: SerialNumber: 0000:00:13.0
> [    0.749940] hub 5-0:1.0: USB hub found
> [    0.749949] hub 5-0:1.0: 3 ports detected
> [    0.750237] ohci-pci 0000:00:13.1: OHCI PCI host controller
> [    0.750246] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
> [    0.750266] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
> [    0.794105] ata1: SATA link down (SStatus 0 SControl 300)
> [    0.795664] ata4: SATA link down (SStatus 0 SControl 300)
> [    0.800164] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [    0.809908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
> [    0.809912] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.809915] usb usb6: Product: OHCI PCI host controller
> [    0.809916] usb usb6: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
> [    0.809918] usb usb6: SerialNumber: 0000:00:13.1
> [    0.810076] hub 6-0:1.0: USB hub found
> [    0.810086] hub 6-0:1.0: 3 ports detected
> [    0.810362] ohci-pci 0000:00:14.5: OHCI PCI host controller
> [    0.810368] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
> [    0.810387] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
> [    0.870052] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
> [    0.870056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.870058] usb usb7: Product: OHCI PCI host controller
> [    0.870059] usb usb7: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
> [    0.870061] usb usb7: SerialNumber: 0000:00:14.5
> [    0.870224] hub 7-0:1.0: USB hub found
> [    0.870233] hub 7-0:1.0: 2 ports detected
> [    0.870434] usbcore: registered new interface driver usbserial_generic
> [    0.870442] usbserial: USB Serial support registered for generic
> [    0.870541] rtc_cmos 00:02: RTC can wake from S4
> [    0.870777] rtc_cmos 00:02: registered as rtc0
> [    0.870804] rtc_cmos 00:02: setting system clock to 2024-05-28T14:51:09 UTC (1716907869)
> [    0.870840] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
> [    0.870893] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
> [    0.871046] ledtrig-cpu: registered to indicate activity on CPUs
> [    0.871556] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
> [    0.876504] Console: switching to colour frame buffer device 160x64
> [    0.880130] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
> [    0.880250] hid: raw HID events driver (C) Jiri Kosina
> [    0.880368] drop_monitor: Initializing network drop monitor service
> [    0.880708] NET: Registered PF_INET6 protocol family
> [    0.888817] Segment Routing with IPv6
> [    0.888821] RPL Segment Routing with IPv6
> [    0.888841] In-situ OAM (IOAM) with IPv6
> [    0.888871] NET: Registered PF_PACKET protocol family
> [    0.888928] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
> [    0.889431] microcode: Current revision: 0x06000852
> [    0.889434] microcode: Updated early from: 0x06000822
> [    0.889571] IPI shorthand broadcast: enabled
> [    0.892436] sched_clock: Marking stable (892072218, -2517491)->(1803923840, -914369113)
> [    0.892699] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
> [    0.892802] registered taskstats version 1
> [    0.893127] Loading compiled-in X.509 certificates
> [    0.897827] Loaded X.509 cert 'Build time autogenerated kernel key: d8f226d306ee433c4f9e55c6647f7453aebee28a'
> [    0.900456] Key type .fscrypt registered
> [    0.900458] Key type fscrypt-provisioning registered
> [    0.901003] PM:   Magic number: 8:921:890
> [    0.904937] RAS: Correctable Errors collector initialized.
> [    0.917594] clk: Disabling unused clocks
> [    0.917598] PM: genpd: Disabling unused power domains
> [    0.948241] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
> [    0.948246] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    0.948248] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter
> [    0.948250] usb 2-1: Manufacturer: Realtek
> [    0.948252] usb 2-1: SerialNumber: 123456
> [    0.957220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    0.957984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    0.958027] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
> [    0.958069] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
> [    0.958100] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [    0.958298] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [    0.958709] ata2.00: configured for UDMA/133
> [    0.959337] ata3.00: configured for UDMA/133
> [    0.971555] scsi 1:0:0:0: Direct-Access     ATA      Apacer AS340 120 2PE0 PQ: 0 ANSI: 5
> [    0.972039] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
> [    0.972044] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
> [    0.972052] sd 1:0:0:0: [sda] Write Protect is off
> [    0.972055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    0.972072] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    0.972104] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
> [    0.972382] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
> [    0.972385] sd 2:0:0:0: [sdb] 4096-byte physical blocks
> [    0.972397] sd 2:0:0:0: [sdb] Write Protect is off
> [    0.972400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    0.972418] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    0.972450] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
> [    0.972747]  sda: sda1 sda2
> [    0.972878] sd 1:0:0:0: [sda] Attached SCSI disk
> [    0.979721]  sdb: sdb1 sdb2
> [    0.979888] sd 2:0:0:0: [sdb] Attached SCSI disk
> [    0.982113] Freeing unused decrypted memory: 2028K
> [    0.982813] Freeing unused kernel image (initmem) memory: 3412K
> [    0.982817] Write protecting the kernel read-only data: 32768k
> [    0.983274] Freeing unused kernel image (rodata/data gap) memory: 1040K
> [    1.024159] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [    1.024163] rodata_test: all tests were successful
> [    1.024167] Run /init as init process
> [    1.024168]   with arguments:
> [    1.024169]     /init
> [    1.024171]   with environment:
> [    1.024171]     HOME=/
> [    1.024172]     TERM=linux
> [    1.024173]     BOOT_IMAGE=/vmlinuz-linux
> [    1.192020] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [    1.192030] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
> [    1.192114] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
> [    1.192303] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [    1.192309] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
> [    1.192314] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
> [    1.192427] scsi host4: pata_atiixp
> [    1.192590] scsi host5: pata_atiixp
> [    1.192637] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0
> [    1.192640] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0
> [    1.192805] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
> [    1.192810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.192812] usb usb8: Product: xHCI Host Controller
> [    1.192814] usb usb8: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd
> [    1.192816] usb usb8: SerialNumber: 0000:02:00.0
> [    1.192970] hub 8-0:1.0: USB hub found
> [    1.192982] hub 8-0:1.0: 1 port detected
> [    1.193137] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
> [    1.193141] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.193143] usb usb9: Product: xHCI Host Controller
> [    1.193145] usb usb9: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd
> [    1.193147] usb usb9: SerialNumber: 0000:02:00.0
> [    1.193622] hub 9-0:1.0: USB hub found
> [    1.193636] hub 9-0:1.0: 4 ports detected
> [    1.280961] usb 1-3: new low-speed USB device number 2 using ohci-pci
> [    1.437586] usb 8-1: new high-speed USB device number 2 using xhci_hcd
> [    1.454253] tsc: Refined TSC clocksource calibration: 3322.063 MHz
> [    1.454279] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b689782, max_idle_ns: 440795272807 ns
> [    1.454361] clocksource: Switched to clocksource tsc
> [    1.471291] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06
> [    1.471296] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [    1.471298] usb 1-3: Product: USB Keyboard
> [    1.494609] usbcore: registered new interface driver usbhid
> [    1.494612] usbhid: USB HID core driver
> [    1.500400] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2
> [    1.554498] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0
> [    1.554894] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3
> [    1.578903] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
> [    1.578907] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [    1.578909] usb 8-1: Product: USB2.0 Hub
> [    1.579618] hub 8-1:1.0: USB hub found
> [    1.579800] hub 8-1:1.0: 4 ports detected
> [    1.611140] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4
> [    1.611211] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6
> [    1.611349] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1
> [    2.100930] usb 4-1: new full-speed USB device number 2 using ohci-pci
> [    2.295746] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00
> [    2.295758] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    2.295764] usb 4-1: Product: USB Gaming Mouse
> [    2.295769] usb 4-1: Manufacturer: RH
> [    2.303143] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7
> [    2.358069] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0
> [    2.364463] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8
> [    2.364541] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9
> [    2.421242] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10
> [    2.421361] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1
> [    2.425111] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2
> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    2.964307] ata2.00: status: { DRDY }
> [    2.964318] ata2: hard resetting link
> [    3.860936] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    3.861698] ata2.00: configured for UDMA/133
> [    3.871801] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    3.871805] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
> [    3.871808] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
> [    3.871810] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00
> [    3.871812] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    3.871832] ata2: EH complete
> [    4.047485] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none.
> [    4.217266] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
> [    4.217273] systemd[1]: Detected architecture x86-64.
> [    4.801003] systemd[1]: bpf-lsm: LSM BPF program attached
> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
> [    4.877597] ata2.00: irq_stat 0x00000040, connection status changed
> [    4.877601] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    4.877613] ata2.00: failed command: READ FPDMA QUEUED
> [    4.877616] ata2.00: cmd 60/08:f8:50:f9:08/00:00:07:00:00/40 tag 31 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    4.877632] ata2.00: status: { DRDY }
> [    4.877639] ata2: hard resetting link
> [    5.774299] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    5.775081] ata2.00: configured for UDMA/133
> [    5.785188] ata2: EH complete
> [    5.836831] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
> [    5.837835] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
> [    6.534243] random: crng init done
> [    6.607583] ata2.00: exception Emask 0x10 SAct 0x6000000 SErr 0x40d0002 action 0xe frozen
> [    6.607595] ata2.00: irq_stat 0x00000040, connection status changed
> [    6.607600] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    6.607611] ata2.00: failed command: READ FPDMA QUEUED
> [    6.607615] ata2.00: cmd 60/40:c8:28:3d:9c/00:00:01:00:00/40 tag 25 ncq dma 32768 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    6.607630] ata2.00: status: { DRDY }
> [    6.607635] ata2.00: failed command: READ FPDMA QUEUED
> [    6.607638] ata2.00: cmd 60/08:d0:30:04:ad/00:00:01:00:00/40 tag 26 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    6.607652] ata2.00: status: { DRDY }
> [    6.607660] ata2: hard resetting link
> [    7.504453] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    7.505241] ata2.00: configured for UDMA/133
> [    7.515397] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    7.515401] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] 
> [    7.515404] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
> [    7.515406] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00
> [    7.515407] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0
> [    7.515417] sd 1:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    7.515419] sd 1:0:0:0: [sda] tag#26 Sense Key : Illegal Request [current] 
> [    7.515421] sd 1:0:0:0: [sda] tag#26 Add. Sense: Unaligned write command
> [    7.515423] sd 1:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00
> [    7.515424] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    7.515440] ata2: EH complete
> [    7.529998] zram: Added device: zram0
> [    7.691188] systemd[1]: Queued start job for default target Graphical Interface.
> [    7.725534] systemd[1]: Created slice Slice /system/dirmngr.
> [    7.725909] systemd[1]: Created slice Slice /system/getty.
> [    7.726235] systemd[1]: Created slice Slice /system/gpg-agent.
> [    7.726555] systemd[1]: Created slice Slice /system/gpg-agent-browser.
> [    7.726882] systemd[1]: Created slice Slice /system/gpg-agent-extra.
> [    7.727202] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
> [    7.727571] systemd[1]: Created slice Slice /system/keyboxd.
> [    7.727960] systemd[1]: Created slice Slice /system/modprobe.
> [    7.728334] systemd[1]: Created slice Slice /system/systemd-fsck.
> [    7.728726] systemd[1]: Created slice Slice /system/systemd-zram-setup.
> [    7.729003] systemd[1]: Created slice User and Session Slice.
> [    7.729063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> [    7.729108] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
> [    7.729268] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [    7.729287] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862...
> [    7.729295] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA...
> [    7.729302] systemd[1]: Expecting device /dev/zram0...
> [    7.729313] systemd[1]: Reached target Local Encrypted Volumes.
> [    7.729329] systemd[1]: Reached target Local Integrity Protected Volumes.
> [    7.729358] systemd[1]: Reached target Path Units.
> [    7.729374] systemd[1]: Reached target Remote File Systems.
> [    7.729384] systemd[1]: Reached target Slice Units.
> [    7.729414] systemd[1]: Reached target Local Verity Protected Volumes.
> [    7.729483] systemd[1]: Listening on Device-mapper event daemon FIFOs.
> [    7.729825] systemd[1]: Listening on LVM2 poll daemon socket.
> [    7.731601] systemd[1]: Listening on Process Core Dump Socket.
> [    7.731717] systemd[1]: Listening on Journal Socket (/dev/log).
> [    7.731826] systemd[1]: Listening on Journal Socket.
> [    7.731962] systemd[1]: Listening on Network Service Netlink Socket.
> [    7.731983] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    7.732283] systemd[1]: Listening on udev Control Socket.
> [    7.732367] systemd[1]: Listening on udev Kernel Socket.
> [    7.733670] systemd[1]: Mounting Huge Pages File System...
> [    7.734432] systemd[1]: Mounting POSIX Message Queue File System...
> [    7.735214] systemd[1]: Mounting Kernel Debug File System...
> [    7.735940] systemd[1]: Mounting Kernel Trace File System...
> [    7.737094] systemd[1]: Starting Create List of Static Device Nodes...
> [    7.738109] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
> [    7.739275] systemd[1]: Starting Load Kernel Module configfs...
> [    7.741004] systemd[1]: Starting Load Kernel Module dm_mod...
> [    7.743396] systemd[1]: Starting Load Kernel Module drm...
> [    7.744638] systemd[1]: Starting Load Kernel Module fuse...
> [    7.745618] systemd[1]: Starting Load Kernel Module loop...
> [    7.745672] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
> [    7.747541] systemd[1]: Starting Journal Service...
> [    7.749286] systemd[1]: Starting Load Kernel Modules...
> [    7.750456] systemd[1]: Starting Generate network units from Kernel command line...
> [    7.750488] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    7.752304] systemd[1]: Starting Remount Root and Kernel File Systems...
> [    7.752407] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    7.753791] systemd[1]: Starting Coldplug All udev Devices...
> [    7.755944] systemd[1]: Mounted Huge Pages File System.
> [    7.756096] systemd[1]: Mounted POSIX Message Queue File System.
> [    7.756210] systemd[1]: Mounted Kernel Debug File System.
> [    7.756338] systemd[1]: Mounted Kernel Trace File System.
> [    7.756613] systemd[1]: Finished Create List of Static Device Nodes.
> [    7.757040] systemd[1]: modprobe@configfs.service: Deactivated successfully.
> [    7.757405] systemd[1]: Finished Load Kernel Module configfs.
> [    7.757836] systemd[1]: modprobe@drm.service: Deactivated successfully.
> [    7.760195] systemd[1]: Finished Load Kernel Module drm.
> [    7.760583] systemd[1]: modprobe@fuse.service: Deactivated successfully.
> [    7.760775] systemd[1]: Finished Load Kernel Module fuse.
> [    7.763032] systemd[1]: Mounting FUSE Control File System...
> [    7.764696] systemd[1]: Mounting Kernel Configuration File System...
> [    7.765008] loop: module loaded
> [    7.765817] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
> [    7.766294] systemd[1]: modprobe@loop.service: Deactivated successfully.
> [    7.766508] systemd[1]: Finished Load Kernel Module loop.
> [    7.766833] systemd[1]: Finished Generate network units from Kernel command line.
> [    7.773114] device-mapper: uevent: version 1.0.3
> [    7.773226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
> [    7.773364] systemd[1]: Mounted FUSE Control File System.
> [    7.773500] systemd[1]: Mounted Kernel Configuration File System.
> [    7.773999] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
> [    7.774199] systemd[1]: Finished Load Kernel Module dm_mod.
> [    7.774797] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
> [    7.777678] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [    7.777730] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [    7.782295] systemd-journald[292]: Collecting audit messages is disabled.
> [    7.789658] Asymmetric key parser 'pkcs8' registered
> [    7.790664] systemd[1]: Finished Load Kernel Modules.
> [    7.791862] systemd[1]: Starting Apply Kernel Variables...
> [    7.797660] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none.
> [    7.798776] systemd[1]: Finished Remount Root and Kernel File Systems.
> [    7.799828] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
> [    7.800904] systemd[1]: Starting Load/Save OS Random Seed...
> [    7.800930] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    7.806934] systemd[1]: Finished Apply Kernel Variables.
> [    7.820293] systemd[1]: Finished Load/Save OS Random Seed.
> [    7.822716] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
> [    7.823917] systemd[1]: Starting Create System Users...
> [    7.853147] systemd[1]: Finished Create System Users.
> [    7.854285] systemd[1]: Starting Create Static Device Nodes in /dev...
> [    7.854815] systemd[1]: Started Journal Service.
> [    7.866721] systemd-journald[292]: Received client request to flush runtime journal.
> [    7.876074] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating.
> [    7.876080] systemd-journald[292]: Rotating system journal.
> [    8.006678] zram0: detected capacity change from 0 to 8388608
> [    8.056885] mousedev: PS/2 mouse device common for all mice
> [    8.058328] parport_pc 00:04: reported by Plug and Play ACPI
> [    8.060958] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [    8.090400] input: PC Speaker as /devices/platform/pcspkr/input/input12
> [    8.090811] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20230628/utaddress-204)
> [    8.090837] ACPI: OSL: Resource conflict; ACPI support missing from driver?
> [    8.093857] cryptd: max_cpu_qlen set to 1000
> [    8.095908] acpi_cpufreq: overriding BIOS provided _PSD data
> [    8.099121] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> [    8.099423] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
> [    8.099428] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
> [    8.123581] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
> [    8.123771] AVX version of gcm_enc/dec engaged.
> [    8.123835] AES CTR mode by8 optimization enabled
> [    8.147638] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28
> [    8.147648] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
> [    8.153349] r8169 0000:03:00.0 enp3s0: renamed from eth0
> [    8.188043] ppdev: user-space parallel port driver
> [    8.193397] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
> [    8.198244] snd_hda_intel 0000:01:00.1: Disabling MSI
> [    8.198265] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
> [    8.226060] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
> [    8.226734] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
> [    8.226821] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
> [    8.226880] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
> [    8.241879] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [    8.241886] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [    8.241889] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [    8.241891] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
> [    8.241893] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
> [    8.241895] snd_hda_codec_realtek hdaudioC0D0:    inputs:
> [    8.241897] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
> [    8.241899] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
> [    8.241901] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
> [    8.321663] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
> [    8.321807] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
> [    8.321864] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
> [    8.321932] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
> [    8.321994] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
> [    8.376761] kvm_amd: TSC scaling supported
> [    8.376766] kvm_amd: Nested Virtualization enabled
> [    8.376768] kvm_amd: Nested Paging enabled
> [    8.376774] kvm_amd: LBR virtualization supported
> [    8.916596] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none.
> [    9.007654] ata2: limiting SATA link speed to 1.5 Gbps
> [    9.007664] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen
> [    9.007671] ata2.00: irq_stat 0x00000040, connection status changed
> [    9.007676] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    9.007685] ata2.00: failed command: READ FPDMA QUEUED
> [    9.007689] ata2.00: cmd 60/08:a8:78:9f:ae/00:00:02:00:00/40 tag 21 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    9.007704] ata2.00: status: { DRDY }
> [    9.007713] ata2: hard resetting link
> [    9.904302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [    9.905397] ata2.00: configured for UDMA/133
> [    9.915594] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    9.915606] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] 
> [    9.915613] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command
> [    9.915620] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00
> [    9.915624] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    9.915657] ata2: EH complete
> [   10.864909] NET: Registered PF_ALG protocol family
> [   10.960863] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
> [   11.157627] r8169 0000:03:00.0 enp3s0: Link is Down
> [   14.170915] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen
> [   14.170929] ata2.00: irq_stat 0x00000040, connection status changed
> [   14.170934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   14.170945] ata2.00: failed command: READ FPDMA QUEUED
> [   14.170949] ata2.00: cmd 60/00:e0:00:39:7f/0a:00:01:00:00/40 tag 28 ncq dma 1310720 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   14.170964] ata2.00: status: { DRDY }
> [   14.170973] ata2: hard resetting link
> [   15.067652] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   15.068694] ata2.00: configured for UDMA/133
> [   15.078850] sd 1:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   15.078861] sd 1:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current] 
> [   15.078868] sd 1:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
> [   15.078875] sd 1:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 01 7f 39 00 00 0a 00 00
> [   15.078879] I/O error, dev sda, sector 25114880 op 0x0:(READ) flags 0x80700 phys_seg 36 prio class 0
> [   15.078930] ata2: EH complete
> [   15.660926] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen
> [   15.660939] ata2.00: irq_stat 0x00000040, connection status changed
> [   15.660944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   15.660955] ata2.00: failed command: WRITE FPDMA QUEUED
> [   15.660959] ata2.00: cmd 61/10:e0:08:97:a2/00:00:08:00:00/40 tag 28 ncq dma 8192 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   15.660974] ata2.00: status: { DRDY }
> [   15.660982] ata2: hard resetting link
> [   16.557602] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   16.558620] ata2.00: configured for UDMA/133
> [   16.568804] ata2: EH complete
> [   17.220916] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen
> [   17.220930] ata2.00: irq_stat 0x00000040, connection status changed
> [   17.220934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   17.220944] ata2.00: failed command: READ FPDMA QUEUED
> [   17.220947] ata2.00: cmd 60/10:78:48:a8:04/00:00:0b:00:00/40 tag 15 ncq dma 8192 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   17.220963] ata2.00: status: { DRDY }
> [   17.220972] ata2: hard resetting link
> [   18.117578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   18.118584] ata2.00: configured for UDMA/133
> [   18.128737] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
> [   18.128748] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] 
> [   18.128755] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
> [   18.128761] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 0b 04 a8 48 00 00 10 00
> [   18.128765] I/O error, dev sda, sector 184854600 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
> [   18.128798] ata2: EH complete
> [   18.298855] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating.
> [   20.120927] ata2.00: limiting speed to UDMA/100:PIO4
> [   20.120938] ata2.00: exception Emask 0x10 SAct 0x100 SErr 0x40d0002 action 0xe frozen
> [   20.120945] ata2.00: irq_stat 0x00000040, connection status changed
> [   20.120949] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   20.120958] ata2.00: failed command: READ FPDMA QUEUED
> [   20.120961] ata2.00: cmd 60/08:40:90:f8:87/00:00:04:00:00/40 tag 8 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   20.120976] ata2.00: status: { DRDY }
> [   20.120987] ata2: hard resetting link
> [   21.017651] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   21.018696] ata2.00: configured for UDMA/100
> [   21.028886] ata2: EH complete
> [   21.494246] ata2.00: exception Emask 0x10 SAct 0x100000 SErr 0x40d0002 action 0xe frozen
> [   21.494258] ata2.00: irq_stat 0x00000040, connection status changed
> [   21.494263] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   21.494273] ata2.00: failed command: READ FPDMA QUEUED
> [   21.494277] ata2.00: cmd 60/00:a0:60:07:49/01:00:02:00:00/40 tag 20 ncq dma 131072 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   21.494292] ata2.00: status: { DRDY }
> [   21.494300] ata2: hard resetting link
> [   22.390924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   22.391922] ata2.00: configured for UDMA/100
> [   22.402072] sd 1:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   22.402083] sd 1:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current] 
> [   22.402090] sd 1:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
> [   22.402097] sd 1:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 02 49 07 60 00 01 00 00
> [   22.402101] I/O error, dev sda, sector 38340448 op 0x0:(READ) flags 0x80700 phys_seg 27 prio class 0
> [   22.402136] ata2: EH complete
> [   23.767592] ata2.00: exception Emask 0x10 SAct 0x40040 SErr 0x40d0002 action 0xe frozen
> [   23.767604] ata2.00: irq_stat 0x00000040, connection status changed
> [   23.767609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   23.767617] ata2.00: failed command: WRITE FPDMA QUEUED
> [   23.767621] ata2.00: cmd 61/08:30:e0:36:cf/00:00:01:00:00/40 tag 6 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   23.767636] ata2.00: status: { DRDY }
> [   23.767643] ata2.00: failed command: WRITE FPDMA QUEUED
> [   23.767646] ata2.00: cmd 61/08:90:e8:03:40/00:00:02:00:00/40 tag 18 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   23.767660] ata2.00: status: { DRDY }
> [   23.767668] ata2: hard resetting link
> [   24.664348] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   24.665434] ata2.00: configured for UDMA/100
> [   24.675629] ata2: EH complete
> [   25.267591] ata2.00: exception Emask 0x10 SAct 0xe000 SErr 0x40d0002 action 0xe frozen
> [   25.267605] ata2.00: irq_stat 0x00000040, connection status changed
> [   25.267610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   25.267619] ata2.00: failed command: READ FPDMA QUEUED
> [   25.267623] ata2.00: cmd 60/68:68:a8:a9:50/00:00:05:00:00/40 tag 13 ncq dma 53248 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.267638] ata2.00: status: { DRDY }
> [   25.267643] ata2.00: failed command: READ FPDMA QUEUED
> [   25.267647] ata2.00: cmd 60/b0:70:08:ac:50/02:00:05:00:00/40 tag 14 ncq dma 352256 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.267662] ata2.00: status: { DRDY }
> [   25.267666] ata2.00: failed command: READ FPDMA QUEUED
> [   25.267670] ata2.00: cmd 60/f0:78:b8:af:50/03:00:05:00:00/40 tag 15 ncq dma 516096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.267683] ata2.00: status: { DRDY }
> [   25.267691] ata2: hard resetting link
> [   26.164282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   26.165271] ata2.00: configured for UDMA/100
> [   26.175428] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   26.175439] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
> [   26.175446] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
> [   26.175453] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00
> [   26.175457] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0
> [   26.175501] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   26.175508] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] 
> [   26.175513] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
> [   26.175519] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00
> [   26.175522] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0
> [   26.175547] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   26.175555] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] 
> [   26.175562] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
> [   26.175569] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00
> [   26.175575] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 126 prio class 0
> [   26.175596] ata2: EH complete
> [   26.520926] ata2.00: limiting speed to UDMA/33:PIO4
> [   26.520936] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen
> [   26.520943] ata2.00: irq_stat 0x00000040, connection status changed
> [   26.520948] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   26.520957] ata2.00: failed command: WRITE FPDMA QUEUED
> [   26.520960] ata2.00: cmd 61/20:78:98:78:d0/00:00:06:00:00/40 tag 15 ncq dma 16384 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   26.520976] ata2.00: status: { DRDY }
> [   26.520984] ata2: hard resetting link
> [   27.417761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   27.418764] ata2.00: configured for UDMA/33
> [   27.428954] ata2: EH complete
> [   32.727577] ata2.00: exception Emask 0x10 SAct 0x800000 SErr 0x40d0002 action 0xe frozen
> [   32.727589] ata2.00: irq_stat 0x00000040, connection status changed
> [   32.727594] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   32.727604] ata2.00: failed command: WRITE FPDMA QUEUED
> [   32.727607] ata2.00: cmd 61/18:b8:c0:78:d0/00:00:06:00:00/40 tag 23 ncq dma 12288 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   32.727622] ata2.00: status: { DRDY }
> [   32.727631] ata2: hard resetting link
> [   33.624294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   33.625331] ata2.00: configured for UDMA/33
> [   33.635482] ata2: EH complete
> [   38.700920] ata2.00: exception Emask 0x10 SAct 0x1000000 SErr 0x40d0002 action 0xe frozen
> [   38.700933] ata2.00: irq_stat 0x00000040, connection status changed
> [   38.700938] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   38.700949] ata2.00: failed command: WRITE FPDMA QUEUED
> [   38.700952] ata2.00: cmd 61/18:c0:e0:78:d0/00:00:06:00:00/40 tag 24 ncq dma 12288 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   38.700967] ata2.00: status: { DRDY }
> [   38.700976] ata2: hard resetting link
> [   39.597747] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   39.598795] ata2.00: configured for UDMA/33
> [   39.608942] ata2: EH complete
> [   40.270908] ata2.00: exception Emask 0x10 SAct 0x80000 SErr 0x40d0002 action 0xe frozen
> [   40.270921] ata2.00: irq_stat 0x00000040, connection status changed
> [   40.270925] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   40.270935] ata2.00: failed command: READ FPDMA QUEUED
> [   40.270939] ata2.00: cmd 60/00:98:40:9b:86/01:00:06:00:00/40 tag 19 ncq dma 131072 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   40.270954] ata2.00: status: { DRDY }
> [   40.270963] ata2: hard resetting link
> [   41.167649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   41.168644] ata2.00: configured for UDMA/33
> [   41.178795] sd 1:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   41.178806] sd 1:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current] 
> [   41.178813] sd 1:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command
> [   41.178819] sd 1:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 06 86 9b 40 00 01 00 00
> [   41.178823] I/O error, dev sda, sector 109484864 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
> [   41.178856] ata2: EH complete
> [   44.674255] ata2.00: exception Emask 0x10 SAct 0x3 SErr 0x40d0002 action 0xe frozen
> [   44.674268] ata2.00: irq_stat 0x00000040, connection status changed
> [   44.674273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   44.674281] ata2.00: failed command: WRITE FPDMA QUEUED
> [   44.674285] ata2.00: cmd 61/08:00:00:79:d0/00:00:06:00:00/40 tag 0 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   44.674300] ata2.00: status: { DRDY }
> [   44.674305] ata2.00: failed command: WRITE FPDMA QUEUED
> [   44.674308] ata2.00: cmd 61/50:08:08:79:d0/00:00:06:00:00/40 tag 1 ncq dma 40960 out
>                         res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   44.674322] ata2.00: status: { DRDY }
> [   44.674332] ata2: hard resetting link
> [   45.570935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   45.571973] ata2.00: configured for UDMA/33
> [   45.582165] ata2: EH complete
> [   46.387598] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen
> [   46.387612] ata2.00: irq_stat 0x00000040, connection status changed
> [   46.387617] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   46.387626] ata2.00: failed command: READ FPDMA QUEUED
> [   46.387630] ata2.00: cmd 60/40:68:c0:65:7f/02:00:01:00:00/40 tag 13 ncq dma 294912 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   46.387646] ata2.00: status: { DRDY }
> [   46.387655] ata2: hard resetting link
> [   47.284289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   47.285281] ata2.00: configured for UDMA/33
> [   47.295485] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   47.295497] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
> [   47.295504] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
> [   47.295510] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 7f 65 c0 00 02 40 00
> [   47.295514] I/O error, dev sda, sector 25126336 op 0x0:(READ) flags 0x80700 phys_seg 59 prio class 0
> [   47.295555] ata2: EH complete
> [   48.940920] ata2.00: exception Emask 0x10 SAct 0x78000 SErr 0x40d0002 action 0xe frozen
> [   48.940933] ata2.00: irq_stat 0x00000040, connection status changed
> [   48.940937] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   48.940947] ata2.00: failed command: WRITE FPDMA QUEUED
> [   48.940950] ata2.00: cmd 61/f8:78:08:a4:c0/01:00:09:00:00/40 tag 15 ncq dma 258048 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   48.940965] ata2.00: status: { DRDY }
> [   48.940970] ata2.00: failed command: WRITE FPDMA QUEUED
> [   48.940973] ata2.00: cmd 61/d8:80:00:f8:c1/01:00:09:00:00/40 tag 16 ncq dma 241664 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   48.940987] ata2.00: status: { DRDY }
> [   48.940992] ata2.00: failed command: WRITE FPDMA QUEUED
> [   48.940995] ata2.00: cmd 61/08:88:00:18:a1/00:00:01:00:00/40 tag 17 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   48.941008] ata2.00: status: { DRDY }
> [   48.941012] ata2.00: failed command: WRITE FPDMA QUEUED
> [   48.941015] ata2.00: cmd 61/08:90:08:18:a1/00:00:01:00:00/40 tag 18 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   48.941028] ata2.00: status: { DRDY }
> [   48.941035] ata2: hard resetting link
> [   49.837603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   49.838650] ata2.00: configured for UDMA/33
> [   49.848795] ata2: EH complete
> [   50.860925] ata2.00: exception Emask 0x10 SAct 0xff0000 SErr 0x40d0002 action 0xe frozen
> [   50.860939] ata2.00: irq_stat 0x00000040, connection status changed
> [   50.860944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   50.860953] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.860957] ata2.00: cmd 61/08:80:10:f8:07/00:00:00:00:00/40 tag 16 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.860973] ata2.00: status: { DRDY }
> [   50.860978] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.860981] ata2.00: cmd 61/08:88:48:1b:09/00:00:00:00:00/40 tag 17 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.860995] ata2.00: status: { DRDY }
> [   50.860999] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861002] ata2.00: cmd 61/08:90:18:1c:09/00:00:00:00:00/40 tag 18 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861015] ata2.00: status: { DRDY }
> [   50.861020] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861023] ata2.00: cmd 61/08:98:00:f8:c7/00:00:01:00:00/40 tag 19 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861035] ata2.00: status: { DRDY }
> [   50.861039] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861043] ata2.00: cmd 61/08:a0:80:f8:c7/00:00:01:00:00/40 tag 20 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861055] ata2.00: status: { DRDY }
> [   50.861059] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861062] ata2.00: cmd 61/08:a8:a0:f9:c7/00:00:01:00:00/40 tag 21 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861075] ata2.00: status: { DRDY }
> [   50.861079] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861082] ata2.00: cmd 61/08:b0:c8:fd:c7/00:00:01:00:00/40 tag 22 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861094] ata2.00: status: { DRDY }
> [   50.861098] ata2.00: failed command: WRITE FPDMA QUEUED
> [   50.861101] ata2.00: cmd 61/08:b8:b8:f9:c8/00:00:01:00:00/40 tag 23 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   50.861114] ata2.00: status: { DRDY }
> [   50.861121] ata2: hard resetting link
> [   51.757643] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   51.758674] ata2.00: configured for UDMA/33
> [   51.768836] ata2: EH complete
> [    0.000000] Linux version 6.10.0-rc1-1.1-mainline (linux-mainline@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 19:28:34 +0000
> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
> [    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] APIC: Static calls initialized
> [    0.000000] SMBIOS 2.4 present.
> [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017
> [    0.000000] DMI: Memory slots populated: 2/4
> [    0.000000] tsc: Fast TSC calibration using PIT
> [    0.000000] tsc: Detected 3321.904 MHz processor
> [    0.002898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.002902] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.002908] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
> [    0.002917] total RAM covered: 3070M
> [    0.003218] Found optimal setting for mtrr clean up
> [    0.003219]  gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
> [    0.003224] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs
> [    0.003226] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
> [    0.004086] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
> [    0.004096] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
> [    0.006997] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
> [    0.007018] Using GB pages for direct mapping
> [    0.007298] RAMDISK: [mem 0x31cc3000-0x34e58fff]
> [    0.007401] ACPI: Early table checksum verification disabled
> [    0.007406] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT   )
> [    0.007411] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007417] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007423] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
> [    0.007427] ACPI: FACS 0x00000000BFDF0000 000040
> [    0.007431] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007435] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
> [    0.007438] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007442] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT    GBT   B0 5455312E BG?? 00000101)
> [    0.007446] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
> [    0.007450] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
> [    0.007453] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3]
> [    0.007454] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6]
> [    0.007456] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f]
> [    0.007457] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14]
> [    0.007458] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77]
> [    0.007459] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb]
> [    0.007460] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1]
> [    0.007462] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb]
> [    0.007463] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473]
> [    0.007526] No NUMA configuration found
> [    0.007527] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
> [    0.007531] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff]
> [    0.007572] Zone ranges:
> [    0.007572]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
> [    0.007575]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
> [    0.007576]   Normal   [mem 0x0000000100000000-0x000000043effffff]
> [    0.007578]   Device   empty
> [    0.007579] Movable zone start for each node
> [    0.007580] Early memory node ranges
> [    0.007581]   node   0: [mem 0x0000000000001000-0x000000000009efff]
> [    0.007583]   node   0: [mem 0x0000000000100000-0x00000000bfdeffff]
> [    0.007584]   node   0: [mem 0x0000000100000000-0x000000043effffff]
> [    0.007587] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
> [    0.007593] On node 0, zone DMA: 1 pages in unavailable ranges
> [    0.007635] On node 0, zone DMA: 97 pages in unavailable ranges
> [    0.055259] On node 0, zone Normal: 528 pages in unavailable ranges
> [    0.055335] On node 0, zone Normal: 4096 pages in unavailable ranges
> [    0.055516] ACPI: PM-Timer IO Port: 0x4008
> [    0.055528] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> [    0.055530] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> [    0.055531] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> [    0.055533] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> [    0.055534] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
> [    0.055535] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
> [    0.055536] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
> [    0.055537] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
> [    0.055549] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> [    0.055552] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.055555] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [    0.055559] ACPI: Using ACPI (MADT) for SMP configuration information
> [    0.055561] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> [    0.055570] CPU topo: Max. logical packages:   1
> [    0.055572] CPU topo: Max. logical dies:       1
> [    0.055573] CPU topo: Max. dies per package:   1
> [    0.055578] CPU topo: Max. threads per core:   1
> [    0.055579] CPU topo: Num. cores per package:     8
> [    0.055580] CPU topo: Num. threads per package:   8
> [    0.055580] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
> [    0.055593] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [    0.055595] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [    0.055596] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [    0.055598] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [    0.055599] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
> [    0.055600] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
> [    0.055601] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
> [    0.055602] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
> [    0.055603] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
> [    0.055604] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
> [    0.055605] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
> [    0.055608] [mem 0xbff00000-0xdfffffff] available for PCI devices
> [    0.055609] Booting paravirtualized kernel on bare hardware
> [    0.055612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
> [    0.061591] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> [    0.062566] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
> [    0.062574] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
> [    0.062578] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
> [    0.062599] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
> [    0.062678] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-mainline", will be passed to user space.
> [    0.065485] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [    0.066928] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> [    0.067006] Fallback order for Node 0: 0 
> [    0.067011] Built 1 zonelists, mobility grouping on.  Total pages: 4189582
> [    0.067013] Policy zone: Normal
> [    0.067423] mem auto-init: stack:all(zero), heap alloc:on, heap free:off, mlocked free:off
> [    0.067430] software IO TLB: area num 8.
> [    0.153788] Memory: 16301880K/16758328K available (18432K kernel code, 2176K rwdata, 13400K rodata, 3428K init, 3572K bss, 456188K reserved, 0K cma-reserved)
> [    0.161940] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [    0.162138] ftrace: allocating 50086 entries in 196 pages
> [    0.173494] ftrace: allocated 196 pages with 3 groups
> [    0.173657] Dynamic Preempt: full
> [    0.173885] rcu: Preemptible hierarchical RCU implementation.
> [    0.173887] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
> [    0.173888] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
> [    0.173890] 	Trampoline variant of Tasks RCU enabled.
> [    0.173890] 	Rude variant of Tasks RCU enabled.
> [    0.173891] 	Tracing variant of Tasks RCU enabled.
> [    0.173892] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
> [    0.173893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
> [    0.173902] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.173905] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.173907] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
> [    0.179570] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
> [    0.179784] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [    0.179879] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
> [    0.179956] spurious 8259A interrupt: IRQ7.
> [    0.179980] Console: colour dummy device 80x25
> [    0.179984] printk: legacy console [tty0] enabled
> [    0.180390] ACPI: Core revision 20240322
> [    0.180614] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
> [    0.180648] APIC: Switch to symmetric I/O mode setup
> [    0.181152] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.197302] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe21ff3be8, max_idle_ns: 440795205660 ns
> [    0.197308] Calibrating delay loop (skipped), value calculated using timer frequency.. 6646.63 BogoMIPS (lpj=11073013)
> [    0.197338] LVT offset 1 assigned for vector 0xf9
> [    0.197343] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
> [    0.197345] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
> [    0.197350] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [    0.197352] Spectre V2 : Mitigation: Retpolines
> [    0.197353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [    0.197355] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
> [    0.197356] Spectre V2 : Enabling Speculation Barrier for firmware calls
> [    0.197357] RETBleed: Mitigation: untrained return thunk
> [    0.197359] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [    0.197361] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [    0.197365] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [    0.197367] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [    0.197368] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [    0.197370] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
> [    0.197372] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
> [    0.222663] Freeing SMP alternatives memory: 40K
> [    0.222669] pid_max: default: 32768 minimum: 301
> [    0.223427] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
> [    0.224276] landlock: Up and running.
> [    0.224279] Yama: becoming mindful.
> [    0.224286] LSM support for eBPF active
> [    0.224534] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [    0.224574] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [    0.230788] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms
> [    0.230793] APIC delta adjusted to PM-Timer: 1259529 (1506)
> [    0.230803] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
> [    0.231213] Performance Events: Fam15h core perfctr, AMD PMU driver.
> [    0.231219] ... version:                0
> [    0.231220] ... bit width:              48
> [    0.231221] ... generic registers:      6
> [    0.231222] ... value mask:             0000ffffffffffff
> [    0.231224] ... max period:             00007fffffffffff
> [    0.231225] ... fixed-purpose events:   0
> [    0.231226] ... event mask:             000000000000003f
> [    0.231331] signal: max sigframe size: 1776
> [    0.231377] rcu: Hierarchical SRCU implementation.
> [    0.231378] rcu: 	Max phase no-delay instances is 1000.
> [    0.233728] MCE: In-kernel MCE decoding enabled.
> [    0.233797] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [    0.233938] smp: Bringing up secondary CPUs ...
> [    0.233972] smpboot: x86: Booting SMP configuration:
> [    0.233972] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
> [    0.000830] call_irq_handler: 1.55 No irq handler for vector
> [    0.000830] call_irq_handler: 2.55 No irq handler for vector
> [    0.000830] call_irq_handler: 3.55 No irq handler for vector
> [    0.000830] call_irq_handler: 4.55 No irq handler for vector
> [    0.000830] call_irq_handler: 5.55 No irq handler for vector
> [    0.000830] call_irq_handler: 6.55 No irq handler for vector
> [    0.000830] call_irq_handler: 7.55 No irq handler for vector
> [    0.261635] smp: Brought up 1 node, 8 CPUs
> [    0.261635] smpboot: Total of 8 processors activated (53171.06 BogoMIPS)
> [    0.265003] devtmpfs: initialized
> [    0.265003] x86/mm: Memory block size: 128MB
> [    0.268551] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
> [    0.268551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
> [    0.268551] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
> [    0.268551] pinctrl core: initialized pinctrl subsystem
> [    0.268551] PM: RTC time: 14:55:24, date: 2024-05-28
> [    0.268691] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [    0.269102] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
> [    0.269371] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [    0.269670] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [    0.269684] audit: initializing netlink subsys (disabled)
> [    0.270682] audit: type=2000 audit(1716908123.093:1): state=initialized audit_enabled=0 res=1
> [    0.270802] thermal_sys: Registered thermal governor 'fair_share'
> [    0.270804] thermal_sys: Registered thermal governor 'bang_bang'
> [    0.270805] thermal_sys: Registered thermal governor 'step_wise'
> [    0.270807] thermal_sys: Registered thermal governor 'user_space'
> [    0.270808] thermal_sys: Registered thermal governor 'power_allocator'
> [    0.270818] cpuidle: using governor ladder
> [    0.270818] cpuidle: using governor menu
> [    0.270818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.271055] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
> [    0.271071] PCI: Using configuration type 1 for base access
> [    0.271227] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [    0.274047] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
> [    0.274047] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
> [    0.274047] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> [    0.274047] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> [    0.274068] Demotion targets for Node 0: null
> [    0.274192] fbcon: Taking over console
> [    0.274192] ACPI: Added _OSI(Module Device)
> [    0.274192] ACPI: Added _OSI(Processor Device)
> [    0.274192] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.274192] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.278725] ACPI: 2 ACPI AML tables successfully acquired and loaded
> [    0.278998] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279005] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279028] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279034] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279040] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279046] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279057] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279063] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279069] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279075] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279086] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279092] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279097] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279103] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279114] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279120] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279126] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279131] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279142] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279148] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279153] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279159] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279170] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279176] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279181] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279187] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279198] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279204] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279209] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279215] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279226] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.279231] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279237] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279242] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279254] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
> [    0.279259] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
> [    0.279265] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
> [    0.279270] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
> [    0.284061] ACPI: _OSC evaluation for CPUs failed, trying _PDC
> [    0.284126] ACPI: Interpreter enabled
> [    0.284126] ACPI: PM: (supports S0 S3 S4 S5)
> [    0.284126] ACPI: Using IOAPIC for interrupt routing
> [    0.284458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.284460] PCI: Using E820 reservations for host bridge windows
> [    0.284609] ACPI: Enabled 5 GPEs in block 00 to 1F
> [    0.291651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [    0.291658] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
> [    0.292037] PCI host bridge to bus 0000:00
> [    0.292039] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
> [    0.292042] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
> [    0.292045] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
> [    0.292047] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
> [    0.292050] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    0.292068] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint
> [    0.292080] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
> [    0.292159] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port
> [    0.292172] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.292176] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
> [    0.292179] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
> [    0.292185] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.292191] pci 0000:00:02.0: enabling Extended Tags
> [    0.292219] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [    0.292325] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port
> [    0.292338] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.292342] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
> [    0.292344] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
> [    0.292349] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.292355] pci 0000:00:04.0: enabling Extended Tags
> [    0.292382] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
> [    0.292485] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port
> [    0.292498] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.292502] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
> [    0.292504] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
> [    0.292509] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.292515] pci 0000:00:06.0: enabling Extended Tags
> [    0.292542] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [    0.292669] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint
> [    0.292686] pci 0000:00:11.0: BAR 0 [io  0xff00-0xff07]
> [    0.292696] pci 0000:00:11.0: BAR 1 [io  0xfe00-0xfe03]
> [    0.292705] pci 0000:00:11.0: BAR 2 [io  0xfd00-0xfd07]
> [    0.292714] pci 0000:00:11.0: BAR 3 [io  0xfc00-0xfc03]
> [    0.292723] pci 0000:00:11.0: BAR 4 [io  0xfb00-0xfb0f]
> [    0.292732] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff]
> [    0.292754] pci 0000:00:11.0: set SATA to AHCI mode
> [    0.292864] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.292883] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff]
> [    0.293014] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.293031] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff]
> [    0.293175] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
> [    0.293192] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff]
> [    0.293270] pci 0000:00:12.2: supports D1 D2
> [    0.293272] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
> [    0.293362] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.293379] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff]
> [    0.293512] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.293529] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff]
> [    0.293665] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
> [    0.293682] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff]
> [    0.293760] pci 0000:00:13.2: supports D1 D2
> [    0.293762] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
> [    0.293857] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
> [    0.294016] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
> [    0.294033] pci 0000:00:14.1: BAR 0 [io  0x0000-0x0007]
> [    0.294042] pci 0000:00:14.1: BAR 1 [io  0x0000-0x0003]
> [    0.294051] pci 0000:00:14.1: BAR 2 [io  0x0000-0x0007]
> [    0.294060] pci 0000:00:14.1: BAR 3 [io  0x0000-0x0003]
> [    0.294069] pci 0000:00:14.1: BAR 4 [io  0xfa00-0xfa0f]
> [    0.294089] pci 0000:00:14.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
> [    0.294090] pci 0000:00:14.1: BAR 1 [io  0x03f6]: legacy IDE quirk
> [    0.294092] pci 0000:00:14.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
> [    0.294094] pci 0000:00:14.1: BAR 3 [io  0x0376]: legacy IDE quirk
> [    0.294201] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
> [    0.294223] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit]
> [    0.294288] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> [    0.294373] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
> [    0.294539] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
> [    0.294570] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
> [    0.294576] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
> [    0.294579] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
> [    0.294585] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
> [    0.294675] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
> [    0.294692] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff]
> [    0.294826] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint
> [    0.294878] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint
> [    0.294926] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint
> [    0.294974] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint
> [    0.295027] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint
> [    0.295084] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint
> [    0.295186] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint
> [    0.295200] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
> [    0.295211] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
> [    0.295222] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref]
> [    0.295229] pci 0000:01:00.0: BAR 5 [io  0xef00-0xef7f]
> [    0.295237] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref]
> [    0.295267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [    0.295352] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
> [    0.295433] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
> [    0.295447] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff]
> [    0.295596] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.295643] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
> [    0.295658] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit]
> [    0.295719] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.295791] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.295839] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
> [    0.295855] pci 0000:03:00.0: BAR 0 [io  0xce00-0xceff]
> [    0.295875] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit]
> [    0.295889] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref]
> [    0.295971] pci 0000:03:00.0: supports D1 D2
> [    0.295973] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.296102] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.296118] pci_bus 0000:04: extended config space not accessible
> [    0.296180] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
> [    0.296190] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
> [    0.296192] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
> [    0.296194] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
> [    0.296197] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
> [    0.296492] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
> [    0.296494] ACPI: PCI: Interrupt link LNKA disabled
> [    0.296554] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
> [    0.296556] ACPI: PCI: Interrupt link LNKB disabled
> [    0.296615] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
> [    0.296617] ACPI: PCI: Interrupt link LNKC disabled
> [    0.296675] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
> [    0.296677] ACPI: PCI: Interrupt link LNKD disabled
> [    0.296736] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
> [    0.296738] ACPI: PCI: Interrupt link LNKE disabled
> [    0.296796] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
> [    0.296797] ACPI: PCI: Interrupt link LNKF disabled
> [    0.296855] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
> [    0.296857] ACPI: PCI: Interrupt link LNK0 disabled
> [    0.296915] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
> [    0.296916] ACPI: PCI: Interrupt link LNK1 disabled
> [    0.297713] iommu: Default domain type: Translated
> [    0.297713] iommu: DMA domain TLB invalidation policy: lazy mode
> [    0.297713] SCSI subsystem initialized
> [    0.297713] libata version 3.00 loaded.
> [    0.297713] ACPI: bus type USB registered
> [    0.297713] usbcore: registered new interface driver usbfs
> [    0.297713] usbcore: registered new interface driver hub
> [    0.297713] usbcore: registered new device driver usb
> [    0.297713] EDAC MC: Ver: 3.0.0
> [    0.297713] NetLabel: Initializing
> [    0.297713] NetLabel:  domain hash size = 128
> [    0.297713] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> [    0.297713] NetLabel:  unlabeled traffic allowed by default
> [    0.297713] mctp: management component transport protocol core
> [    0.297713] NET: Registered PF_MCTP protocol family
> [    0.297713] PCI: Using ACPI for IRQ routing
> [    0.306985] PCI: pci_cache_line_size set to 64 bytes
> [    0.307038] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
> [    0.307040] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff]
> [    0.307042] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
> [    0.307357] pci 0000:01:00.0: vgaarb: setting as boot VGA device
> [    0.307357] pci 0000:01:00.0: vgaarb: bridge control possible
> [    0.307357] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [    0.307357] vgaarb: loaded
> [    0.307357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [    0.307358] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> [    0.310643] clocksource: Switched to clocksource tsc-early
> [    0.310661] VFS: Disk quotas dquot_6.6.0
> [    0.310661] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    0.310661] pnp: PnP ACPI init
> [    0.310661] system 00:00: [io  0x04d0-0x04d1] has been reserved
> [    0.310661] system 00:00: [io  0x0220-0x0225] has been reserved
> [    0.310661] system 00:00: [io  0x0290-0x0294] has been reserved
> [    0.311960] system 00:01: [io  0x4100-0x411f] has been reserved
> [    0.311967] system 00:01: [io  0x0228-0x022f] has been reserved
> [    0.311970] system 00:01: [io  0x040b] has been reserved
> [    0.311972] system 00:01: [io  0x04d6] has been reserved
> [    0.311974] system 00:01: [io  0x0c00-0x0c01] has been reserved
> [    0.311976] system 00:01: [io  0x0c14] has been reserved
> [    0.311978] system 00:01: [io  0x0c50-0x0c52] has been reserved
> [    0.311980] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
> [    0.311982] system 00:01: [io  0x0c6f] has been reserved
> [    0.311984] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
> [    0.311986] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
> [    0.311987] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
> [    0.311989] system 00:01: [io  0x4000-0x40fe] has been reserved
> [    0.311995] system 00:01: [io  0x4210-0x4217] has been reserved
> [    0.311997] system 00:01: [io  0x0b00-0x0b0f] has been reserved
> [    0.311999] system 00:01: [io  0x0b10-0x0b1f] has been reserved
> [    0.312001] system 00:01: [io  0x0b20-0x0b3f] has been reserved
> [    0.312003] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved
> [    0.312006] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
> [    0.313070] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
> [    0.313313] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
> [    0.313336] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
> [    0.313339] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
> [    0.313341] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
> [    0.313343] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
> [    0.313346] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
> [    0.313348] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
> [    0.313350] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved
> [    0.313352] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved
> [    0.313354] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved
> [    0.313357] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
> [    0.313359] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
> [    0.313361] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
> [    0.313386] pnp: PnP ACPI: found 7 devices
> [    0.320151] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [    0.320423] NET: Registered PF_INET protocol family
> [    0.320747] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [    0.337449] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
> [    0.337493] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [    0.337664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [    0.338080] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [    0.338397] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.338622] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
> [    0.338775] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [    0.338839] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [    0.338937] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [    0.338952] NET: Registered PF_XDP protocol family
> [    0.338967] pci 0000:00:02.0: PCI bridge to [bus 01]
> [    0.338971] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
> [    0.338975] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
> [    0.338978] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.338982] pci 0000:00:04.0: PCI bridge to [bus 02]
> [    0.338984] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
> [    0.338987] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
> [    0.338990] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.338994] pci 0000:00:06.0: PCI bridge to [bus 03]
> [    0.338996] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
> [    0.338999] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
> [    0.339001] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.339006] pci 0000:00:14.4: PCI bridge to [bus 04]
> [    0.339008] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
> [    0.339013] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
> [    0.339017] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
> [    0.339024] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
> [    0.339027] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
> [    0.339029] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
> [    0.339031] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
> [    0.339033] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
> [    0.339034] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
> [    0.339036] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
> [    0.339038] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
> [    0.339040] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
> [    0.339042] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
> [    0.339044] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
> [    0.339045] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
> [    0.339047] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
> [    0.339049] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
> [    0.339051] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
> [    0.339053] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
> [    0.339055] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
> [    0.339056] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
> [    0.339058] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
> [    0.339060] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
> [    0.358813] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 19226 usecs
> [    0.375500] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 16282 usecs
> [    0.392195] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 16103 usecs
> [    0.408890] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 16292 usecs
> [    0.425585] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 16090 usecs
> [    0.425616] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
> [    0.425651] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
> [    0.425850] PCI: CLS 64 bytes, default 64
> [    0.425871] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.425872] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB)
> [    0.425913] LVT offset 0 assigned for vector 0x400
> [    0.425959] Trying to unpack rootfs image as initramfs...
> [    0.431037] perf: AMD IBS detected (0x000000ff)
> [    0.432658] Initialise system trusted keyrings
> [    0.432672] Key type blacklist registered
> [    0.432730] workingset: timestamp_bits=41 max_order=22 bucket_order=0
> [    0.432739] zbud: loaded
> [    0.433154] fuse: init (API version 7.40)
> [    0.433398] integrity: Platform Keyring initialized
> [    0.433404] integrity: Machine keyring initialized
> [    0.448217] Key type asymmetric registered
> [    0.448219] Asymmetric key parser 'x509' registered
> [    0.448295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
> [    0.448363] io scheduler mq-deadline registered
> [    0.448365] io scheduler kyber registered
> [    0.448421] io scheduler bfq registered
> [    0.449310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [    0.449428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [    0.449459] ACPI: button: Power Button [PWRB]
> [    0.449508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [    0.451942] ACPI: button: Power Button [PWRF]
> [    0.452005] ACPI: \_PR_.C000: Found 2 idle states
> [    0.452097] ACPI: \_PR_.C001: Found 2 idle states
> [    0.452173] ACPI: \_PR_.C002: Found 2 idle states
> [    0.452251] ACPI: \_PR_.C003: Found 2 idle states
> [    0.452328] ACPI: \_PR_.C004: Found 2 idle states
> [    0.452412] ACPI: \_PR_.C005: Found 2 idle states
> [    0.452481] ACPI: \_PR_.C006: Found 2 idle states
> [    0.452548] ACPI: \_PR_.C007: Found 2 idle states
> [    0.452838] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [    0.453015] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [    0.456260] Non-volatile memory driver v1.3
> [    0.456262] Linux agpgart interface v0.103
> [    0.456370] ACPI: bus type drm_connector registered
> [    0.457223] ahci 0000:00:11.0: version 3.0
> [    0.457443] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
> [    0.457447] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf)
> [    0.457450] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
> [    0.458045] scsi host0: ahci
> [    0.458260] scsi host1: ahci
> [    0.458401] scsi host2: ahci
> [    0.458525] scsi host3: ahci
> [    0.458578] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3
> [    0.458582] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3
> [    0.458584] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3
> [    0.458587] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3
> [    0.458798] ohci-pci 0000:00:12.0: OHCI PCI host controller
> [    0.458805] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
> [    0.458845] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
> [    0.517654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
> [    0.517662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.517665] usb usb1: Product: OHCI PCI host controller
> [    0.517667] usb usb1: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
> [    0.517669] usb usb1: SerialNumber: 0000:00:12.0
> [    0.517928] hub 1-0:1.0: USB hub found
> [    0.517940] hub 1-0:1.0: 3 ports detected
> [    0.518219] ehci-pci 0000:00:12.2: EHCI Host Controller
> [    0.518226] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
> [    0.518231] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [    0.518242] ehci-pci 0000:00:12.2: debug port 1
> [    0.518296] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
> [    0.524334] Freeing initrd memory: 50776K
> [    0.530326] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [    0.530446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
> [    0.530450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.530452] usb usb2: Product: EHCI Host Controller
> [    0.530454] usb usb2: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd
> [    0.530456] usb usb2: SerialNumber: 0000:00:12.2
> [    0.530609] hub 2-0:1.0: USB hub found
> [    0.530617] hub 2-0:1.0: 6 ports detected
> [    0.597196] hub 1-0:1.0: USB hub found
> [    0.597209] hub 1-0:1.0: 3 ports detected
> [    0.597341] ehci-pci 0000:00:13.2: EHCI Host Controller
> [    0.597348] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
> [    0.597353] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [    0.597364] ehci-pci 0000:00:13.2: debug port 1
> [    0.597414] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
> [    0.610458] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [    0.610575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
> [    0.610578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.610581] usb usb3: Product: EHCI Host Controller
> [    0.610583] usb usb3: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd
> [    0.610584] usb usb3: SerialNumber: 0000:00:13.2
> [    0.610700] hub 3-0:1.0: USB hub found
> [    0.610708] hub 3-0:1.0: 6 ports detected
> [    0.610891] ohci-pci 0000:00:12.1: OHCI PCI host controller
> [    0.610897] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
> [    0.610926] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
> [    0.671296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
> [    0.671300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.671302] usb usb4: Product: OHCI PCI host controller
> [    0.671304] usb usb4: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
> [    0.671305] usb usb4: SerialNumber: 0000:00:12.1
> [    0.671543] hub 4-0:1.0: USB hub found
> [    0.671554] hub 4-0:1.0: 3 ports detected
> [    0.671854] ohci-pci 0000:00:13.0: OHCI PCI host controller
> [    0.671859] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
> [    0.671895] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
> [    0.731397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
> [    0.731401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.731403] usb usb5: Product: OHCI PCI host controller
> [    0.731404] usb usb5: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
> [    0.731406] usb usb5: SerialNumber: 0000:00:13.0
> [    0.731651] hub 5-0:1.0: USB hub found
> [    0.731670] hub 5-0:1.0: 3 ports detected
> [    0.731930] ohci-pci 0000:00:13.1: OHCI PCI host controller
> [    0.731936] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
> [    0.731955] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
> [    0.772520] ata4: SATA link down (SStatus 0 SControl 300)
> [    0.773799] ata1: SATA link down (SStatus 0 SControl 300)
> [    0.783810] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [    0.791492] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
> [    0.791497] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.791499] usb usb6: Product: OHCI PCI host controller
> [    0.791501] usb usb6: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
> [    0.791503] usb usb6: SerialNumber: 0000:00:13.1
> [    0.791683] hub 6-0:1.0: USB hub found
> [    0.791697] hub 6-0:1.0: 3 ports detected
> [    0.791966] ohci-pci 0000:00:14.5: OHCI PCI host controller
> [    0.791972] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
> [    0.791991] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
> [    0.851602] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
> [    0.851606] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.851608] usb usb7: Product: OHCI PCI host controller
> [    0.851610] usb usb7: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
> [    0.851611] usb usb7: SerialNumber: 0000:00:14.5
> [    0.851843] hub 7-0:1.0: USB hub found
> [    0.851854] hub 7-0:1.0: 2 ports detected
> [    0.852034] usbcore: registered new interface driver usbserial_generic
> [    0.852041] usbserial: USB Serial support registered for generic
> [    0.852130] rtc_cmos 00:02: RTC can wake from S4
> [    0.852362] rtc_cmos 00:02: registered as rtc0
> [    0.852387] rtc_cmos 00:02: setting system clock to 2024-05-28T14:55:25 UTC (1716908125)
> [    0.852420] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
> [    0.852467] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
> [    0.852678] ledtrig-cpu: registered to indicate activity on CPUs
> [    0.853181] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
> [    0.858086] Console: switching to colour frame buffer device 160x64
> [    0.861204] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
> [    0.861268] hid: raw HID events driver (C) Jiri Kosina
> [    0.861357] drop_monitor: Initializing network drop monitor service
> [    0.861679] NET: Registered PF_INET6 protocol family
> [    0.869644] Segment Routing with IPv6
> [    0.869647] RPL Segment Routing with IPv6
> [    0.869665] In-situ OAM (IOAM) with IPv6
> [    0.869704] NET: Registered PF_PACKET protocol family
> [    0.869756] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
> [    0.870256] microcode: Current revision: 0x06000852
> [    0.870258] microcode: Updated early from: 0x06000822
> [    0.870396] IPI shorthand broadcast: enabled
> [    0.873069] sched_clock: Marking stable (874176692, -2503248)->(1778689574, -907016130)
> [    0.873227] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
> [    0.873326] registered taskstats version 1
> [    0.873659] Loading compiled-in X.509 certificates
> [    0.878261] Loaded X.509 cert 'Build time autogenerated kernel key: 06d3346cea79f18ad765f94d96c9d8cc480c5b54'
> [    0.880699] Demotion targets for Node 0: null
> [    0.880949] Key type .fscrypt registered
> [    0.880951] Key type fscrypt-provisioning registered
> [    0.881482] PM:   Magic number: 8:474:941
> [    0.885072] RAS: Correctable Errors collector initialized.
> [    0.899067] clk: Disabling unused clocks
> [    0.899071] PM: genpd: Disabling unused power domains
> [    0.935183] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
> [    0.935188] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    0.935191] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter
> [    0.935193] usb 2-1: Manufacturer: Realtek
> [    0.935194] usb 2-1: SerialNumber: 123456
> [    0.938653] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    0.938815] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
> [    0.938845] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [    0.939449] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    0.939469] ata2.00: configured for UDMA/133
> [    0.940170] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
> [    0.940398] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [    0.941260] ata3.00: configured for UDMA/133
> [    0.952301] scsi 1:0:0:0: Direct-Access     ATA      Apacer AS340 120 2PE0 PQ: 0 ANSI: 5
> [    0.952706] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
> [    0.952718] sd 1:0:0:0: [sda] Write Protect is off
> [    0.952720] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    0.952738] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
> [    0.952745] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    0.952783] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
> [    0.953078] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
> [    0.953081] sd 2:0:0:0: [sdb] 4096-byte physical blocks
> [    0.953094] sd 2:0:0:0: [sdb] Write Protect is off
> [    0.953097] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    0.953119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    0.953155] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
> [    0.953410]  sda: sda1 sda2
> [    0.953543] sd 1:0:0:0: [sda] Attached SCSI disk
> [    0.974223]  sdb: sdb1 sdb2
> [    0.974515] sd 2:0:0:0: [sdb] Attached SCSI disk
> [    0.976712] Freeing unused decrypted memory: 2028K
> [    0.977421] Freeing unused kernel image (initmem) memory: 3428K
> [    0.977449] Write protecting the kernel read-only data: 32768k
> [    0.977898] Freeing unused kernel image (rodata/data gap) memory: 936K
> [    1.021479] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [    1.021484] rodata_test: all tests were successful
> [    1.021489] Run /init as init process
> [    1.021490]   with arguments:
> [    1.021492]     /init
> [    1.021493]   with environment:
> [    1.021494]     HOME=/
> [    1.021495]     TERM=linux
> [    1.021496]     BOOT_IMAGE=/vmlinuz-linux-mainline
> [    1.195986] scsi host4: pata_atiixp
> [    1.196167] scsi host5: pata_atiixp
> [    1.196211] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0
> [    1.196214] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0
> [    1.196565] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [    1.196572] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
> [    1.196654] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
> [    1.196822] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [    1.196827] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
> [    1.196830] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
> [    1.196885] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
> [    1.196888] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.196891] usb usb8: Product: xHCI Host Controller
> [    1.196893] usb usb8: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd
> [    1.196895] usb usb8: SerialNumber: 0000:02:00.0
> [    1.197034] hub 8-0:1.0: USB hub found
> [    1.197044] hub 8-0:1.0: 1 port detected
> [    1.197210] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
> [    1.197213] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.197215] usb usb9: Product: xHCI Host Controller
> [    1.197217] usb usb9: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd
> [    1.197218] usb usb9: SerialNumber: 0000:02:00.0
> [    1.197369] hub 9-0:1.0: USB hub found
> [    1.197379] hub 9-0:1.0: 4 ports detected
> [    1.267596] usb 1-3: new low-speed USB device number 2 using ohci-pci
> [    1.440864] usb 8-1: new high-speed USB device number 2 using xhci_hcd
> [    1.450887] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06
> [    1.450899] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [    1.450905] usb 1-3: Product: USB Keyboard
> [    1.454180] tsc: Refined TSC clocksource calibration: 3322.064 MHz
> [    1.454188] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b718c89, max_idle_ns: 440795253369 ns
> [    1.454219] clocksource: Switched to clocksource tsc
> [    1.474236] usbcore: registered new interface driver usbhid
> [    1.474239] usbhid: USB HID core driver
> [    1.480046] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2
> [    1.534698] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0
> [    1.535151] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3
> [    1.585891] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
> [    1.585895] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [    1.585897] usb 8-1: Product: USB2.0 Hub
> [    1.586600] hub 8-1:1.0: USB hub found
> [    1.586788] hub 8-1:1.0: 4 ports detected
> [    1.590941] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4
> [    1.591019] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6
> [    1.591157] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1
> [    2.087607] usb 4-1: new full-speed USB device number 2 using ohci-pci
> [    2.124296] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    2.125160] ata2.00: configured for UDMA/133
> [    2.282382] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00
> [    2.282394] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    2.282400] usb 4-1: Product: USB Gaming Mouse
> [    2.282405] usb 4-1: Manufacturer: RH
> [    2.289786] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7
> [    2.344706] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0
> [    2.352036] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8
> [    2.352104] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9
> [    2.407872] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10
> [    2.407983] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1
> [    2.411756] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2
> [    2.950945] ata2.00: exception Emask 0x10 SAct 0x2 SErr 0x40d0002 action 0xe frozen
> [    2.950958] ata2.00: irq_stat 0x00000040, connection status changed
> [    2.950962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    2.950970] ata2.00: failed command: READ FPDMA QUEUED
> [    2.950974] ata2.00: cmd 60/08:08:80:ff:f1/00:00:0d:00:00/40 tag 1 ncq dma 4096 in
>                         res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [    2.950989] ata2.00: status: { DRDY }
> [    2.951000] ata2: hard resetting link
> [    3.847612] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    3.848393] ata2.00: configured for UDMA/133
> [    3.858578] sd 1:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    3.858590] sd 1:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current] 
> [    3.858596] sd 1:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
> [    3.858602] sd 1:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00
> [    3.858606] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    3.858640] ata2: EH complete
> [    4.024750] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none.
> [    4.189513] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
> [    4.189520] systemd[1]: Detected architecture x86-64.
> [    4.377855] systemd[1]: bpf-lsm: LSM BPF program attached
> [    4.445714] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
> [    4.446994] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
> [    5.074228] random: crng init done
> [    5.137593] ata2.00: exception Emask 0x10 SAct 0x6000 SErr 0x40d0002 action 0xe frozen
> [    5.137605] ata2.00: irq_stat 0x00000040, connection status changed
> [    5.137610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    5.137619] ata2.00: failed command: READ FPDMA QUEUED
> [    5.137623] ata2.00: cmd 60/40:68:28:3d:9c/00:00:01:00:00/40 tag 13 ncq dma 32768 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    5.137638] ata2.00: status: { DRDY }
> [    5.137643] ata2.00: failed command: READ FPDMA QUEUED
> [    5.137646] ata2.00: cmd 60/08:70:30:04:ad/00:00:01:00:00/40 tag 14 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    5.137660] ata2.00: status: { DRDY }
> [    5.137669] ata2: hard resetting link
> [    6.034334] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    6.035116] ata2.00: configured for UDMA/133
> [    6.045220] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    6.045224] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
> [    6.045227] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
> [    6.045229] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00
> [    6.045231] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
> [    6.045240] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    6.045242] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] 
> [    6.045243] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
> [    6.045245] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00
> [    6.045246] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    6.045260] ata2: EH complete
> [    6.061330] zram: Added device: zram0
> [    6.213738] systemd[1]: Queued start job for default target Graphical Interface.
> [    6.268916] systemd[1]: Created slice Slice /system/dirmngr.
> [    6.269281] systemd[1]: Created slice Slice /system/getty.
> [    6.269601] systemd[1]: Created slice Slice /system/gpg-agent.
> [    6.269932] systemd[1]: Created slice Slice /system/gpg-agent-browser.
> [    6.270255] systemd[1]: Created slice Slice /system/gpg-agent-extra.
> [    6.270601] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
> [    6.270969] systemd[1]: Created slice Slice /system/keyboxd.
> [    6.271364] systemd[1]: Created slice Slice /system/modprobe.
> [    6.271741] systemd[1]: Created slice Slice /system/systemd-fsck.
> [    6.272139] systemd[1]: Created slice Slice /system/systemd-zram-setup.
> [    6.272407] systemd[1]: Created slice User and Session Slice.
> [    6.272473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> [    6.272519] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
> [    6.272671] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [    6.272689] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862...
> [    6.272696] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA...
> [    6.272702] systemd[1]: Expecting device /dev/zram0...
> [    6.272712] systemd[1]: Reached target Local Encrypted Volumes.
> [    6.272732] systemd[1]: Reached target Local Integrity Protected Volumes.
> [    6.272760] systemd[1]: Reached target Path Units.
> [    6.272774] systemd[1]: Reached target Remote File Systems.
> [    6.272786] systemd[1]: Reached target Slice Units.
> [    6.272813] systemd[1]: Reached target Local Verity Protected Volumes.
> [    6.272878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
> [    6.274451] systemd[1]: Listening on LVM2 poll daemon socket.
> [    6.276124] systemd[1]: Listening on Process Core Dump Socket.
> [    6.276243] systemd[1]: Listening on Journal Socket (/dev/log).
> [    6.276352] systemd[1]: Listening on Journal Socket.
> [    6.276491] systemd[1]: Listening on Network Service Netlink Socket.
> [    6.276508] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    6.276753] systemd[1]: Listening on udev Control Socket.
> [    6.276841] systemd[1]: Listening on udev Kernel Socket.
> [    6.278013] systemd[1]: Mounting Huge Pages File System...
> [    6.278798] systemd[1]: Mounting POSIX Message Queue File System...
> [    6.279574] systemd[1]: Mounting Kernel Debug File System...
> [    6.280259] systemd[1]: Mounting Kernel Trace File System...
> [    6.281428] systemd[1]: Starting Create List of Static Device Nodes...
> [    6.282416] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
> [    6.283594] systemd[1]: Starting Load Kernel Module configfs...
> [    6.285440] systemd[1]: Starting Load Kernel Module dm_mod...
> [    6.288313] systemd[1]: Starting Load Kernel Module drm...
> [    6.289657] systemd[1]: Starting Load Kernel Module fuse...
> [    6.290654] systemd[1]: Starting Load Kernel Module loop...
> [    6.290721] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
> [    6.293064] systemd[1]: Starting Journal Service...
> [    6.296123] systemd[1]: Starting Load Kernel Modules...
> [    6.297125] systemd[1]: Starting Generate network units from Kernel command line...
> [    6.297157] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    6.298301] systemd[1]: Starting Remount Root and Kernel File Systems...
> [    6.298401] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    6.300167] systemd[1]: Starting Coldplug All udev Devices...
> [    6.302399] systemd[1]: Mounted Huge Pages File System.
> [    6.302541] systemd[1]: Mounted POSIX Message Queue File System.
> [    6.302700] systemd[1]: Mounted Kernel Debug File System.
> [    6.302823] systemd[1]: Mounted Kernel Trace File System.
> [    6.303130] systemd[1]: Finished Create List of Static Device Nodes.
> [    6.303558] systemd[1]: modprobe@configfs.service: Deactivated successfully.
> [    6.303804] systemd[1]: Finished Load Kernel Module configfs.
> [    6.304234] systemd[1]: modprobe@drm.service: Deactivated successfully.
> [    6.305011] systemd[1]: Finished Load Kernel Module drm.
> [    6.305409] systemd[1]: modprobe@fuse.service: Deactivated successfully.
> [    6.305623] systemd[1]: Finished Load Kernel Module fuse.
> [    6.306920] systemd[1]: Mounting FUSE Control File System...
> [    6.310967] systemd[1]: Mounting Kernel Configuration File System...
> [    6.314384] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
> [    6.314746] systemd[1]: Finished Generate network units from Kernel command line.
> [    6.315728] loop: module loaded
> [    6.315812] device-mapper: uevent: version 1.0.3
> [    6.315927] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
> [    6.316131] systemd[1]: Mounted FUSE Control File System.
> [    6.316526] systemd[1]: modprobe@loop.service: Deactivated successfully.
> [    6.316727] systemd[1]: Finished Load Kernel Module loop.
> [    6.317211] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
> [    6.317462] systemd[1]: Finished Load Kernel Module dm_mod.
> [    6.318137] systemd[1]: Mounted Kernel Configuration File System.
> [    6.321272] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
> [    6.327810] systemd-journald[293]: Collecting audit messages is disabled.
> [    6.330711] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [    6.330756] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [    6.337713] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none.
> [    6.338469] Asymmetric key parser 'pkcs8' registered
> [    6.338877] systemd[1]: Finished Remount Root and Kernel File Systems.
> [    6.339806] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
> [    6.340815] systemd[1]: Starting Load/Save OS Random Seed...
> [    6.340851] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [    6.341146] systemd[1]: Finished Load Kernel Modules.
> [    6.342097] systemd[1]: Starting Apply Kernel Variables...
> [    6.359689] systemd[1]: Finished Apply Kernel Variables.
> [    6.360781] systemd[1]: Finished Load/Save OS Random Seed.
> [    6.365885] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
> [    6.366977] systemd[1]: Starting Create System Users...
> [    6.373038] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
> [    6.394752] systemd[1]: Finished Create System Users.
> [    6.395804] systemd[1]: Starting Create Static Device Nodes in /dev...
> [    6.403417] systemd[1]: Started Journal Service.
> [    6.426247] systemd-journald[293]: Received client request to flush runtime journal.
> [    6.436701] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating.
> [    6.436708] systemd-journald[293]: Rotating system journal.
> [    6.561450] zram0: detected capacity change from 0 to 8388608
> [    6.617585] mousedev: PS/2 mouse device common for all mice
> [    6.624669] parport_pc 00:04: reported by Plug and Play ACPI
> [    6.624743] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [    6.642312] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20240322/utaddress-204)
> [    6.642324] ACPI: OSL: Resource conflict; ACPI support missing from driver?
> [    6.642621] acpi_cpufreq: overriding BIOS provided _PSD data
> [    6.646974] input: PC Speaker as /devices/platform/pcspkr/input/input12
> [    6.647702] cryptd: max_cpu_qlen set to 1000
> [    6.662746] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> [    6.663343] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
> [    6.663347] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
> [    6.680483] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
> [    6.687332] AVX version of gcm_enc/dec engaged.
> [    6.687380] AES CTR mode by8 optimization enabled
> [    6.702811] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28
> [    6.702821] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
> [    6.708344] r8169 0000:03:00.0 enp3s0: renamed from eth0
> [    6.729580] ppdev: user-space parallel port driver
> [    6.758079] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
> [    6.761064] snd_hda_intel 0000:01:00.1: Disabling MSI
> [    6.761077] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
> [    6.794382] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
> [    6.794484] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
> [    6.794566] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
> [    6.794649] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
> [    6.806832] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [    6.806839] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [    6.806842] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [    6.806845] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
> [    6.806847] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
> [    6.806849] snd_hda_codec_realtek hdaudioC0D0:    inputs:
> [    6.806851] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
> [    6.806853] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
> [    6.806855] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
> [    6.879588] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
> [    6.879697] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
> [    6.879804] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
> [    6.879915] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
> [    6.879980] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
> [    6.924297] kvm_amd: TSC scaling supported
> [    6.924301] kvm_amd: Nested Virtualization enabled
> [    6.924303] kvm_amd: Nested Paging enabled
> [    6.924310] kvm_amd: LBR virtualization supported
> [    7.482049] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none.
> [    7.574255] ata2: limiting SATA link speed to 1.5 Gbps
> [    7.574266] ata2.00: exception Emask 0x10 SAct 0x2000000 SErr 0x40d0002 action 0xe frozen
> [    7.574273] ata2.00: irq_stat 0x00000040, connection status changed
> [    7.574277] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [    7.574288] ata2.00: failed command: READ FPDMA QUEUED
> [    7.574292] ata2.00: cmd 60/08:c8:78:9f:ae/00:00:02:00:00/40 tag 25 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [    7.574307] ata2.00: status: { DRDY }
> [    7.574315] ata2: hard resetting link
> [    8.471010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [    8.472037] ata2.00: configured for UDMA/133
> [    8.482188] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [    8.482199] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] 
> [    8.482205] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
> [    8.482211] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00
> [    8.482215] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [    8.482247] ata2: EH complete
> [    9.485245] NET: Registered PF_ALG protocol family
> [    9.584213] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
> [    9.774328] r8169 0000:03:00.0 enp3s0: Link is Down
> [   13.954278] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x40d0002 action 0xe frozen
> [   13.954291] ata2.00: irq_stat 0x00000040, connection status changed
> [   13.954296] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   13.954304] ata2.00: failed command: WRITE FPDMA QUEUED
> [   13.954307] ata2.00: cmd 61/10:00:e8:03:40/00:00:02:00:00/40 tag 0 ncq dma 8192 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   13.954322] ata2.00: status: { DRDY }
> [   13.954333] ata2: hard resetting link
> [   14.850920] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   14.851963] ata2.00: configured for UDMA/133
> [   14.862106] ata2: EH complete
> [   15.427587] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
> [   15.427600] ata2.00: irq_stat 0x00000040, connection status changed
> [   15.427604] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   15.427614] ata2.00: failed command: WRITE FPDMA QUEUED
> [   15.427618] ata2.00: cmd 61/38:88:d8:63:d1/00:00:06:00:00/40 tag 17 ncq dma 28672 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   15.427633] ata2.00: status: { DRDY }
> [   15.427643] ata2: hard resetting link
> [   16.324266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   16.325269] ata2.00: configured for UDMA/133
> [   16.335415] ata2: EH complete
> [   16.717613] ata2.00: exception Emask 0x10 SAct 0x7800000f SErr 0x40d0002 action 0xe frozen
> [   16.717625] ata2.00: irq_stat 0x00000040, connection status changed
> [   16.717630] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   16.717637] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717641] ata2.00: cmd 61/08:00:c0:83:49/00:00:00:00:00/40 tag 0 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717656] ata2.00: status: { DRDY }
> [   16.717661] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717664] ata2.00: cmd 61/08:08:d0:83:49/00:00:00:00:00/40 tag 1 ncq dma 4096 out
>                         res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> [   16.717678] ata2.00: status: { DRDY }
> [   16.717682] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717685] ata2.00: cmd 61/e0:10:e0:83:49/00:00:00:00:00/40 tag 2 ncq dma 114688 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717698] ata2.00: status: { DRDY }
> [   16.717702] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717705] ata2.00: cmd 61/48:18:c8:84:49/00:00:00:00:00/40 tag 3 ncq dma 36864 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717717] ata2.00: status: { DRDY }
> [   16.717724] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717727] ata2.00: cmd 61/08:d8:00:68:a0/00:00:0b:00:00/40 tag 27 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717739] ata2.00: status: { DRDY }
> [   16.717743] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717746] ata2.00: cmd 61/88:e0:10:83:49/00:00:00:00:00/40 tag 28 ncq dma 69632 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717759] ata2.00: status: { DRDY }
> [   16.717763] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717766] ata2.00: cmd 61/08:e8:a0:83:49/00:00:00:00:00/40 tag 29 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717778] ata2.00: status: { DRDY }
> [   16.717782] ata2.00: failed command: WRITE FPDMA QUEUED
> [   16.717785] ata2.00: cmd 61/08:f0:b0:83:49/00:00:00:00:00/40 tag 30 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   16.717797] ata2.00: status: { DRDY }
> [   16.717803] ata2: hard resetting link
> [   17.614259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   17.615251] ata2.00: configured for UDMA/133
> [   17.625418] ata2: EH complete
> [   20.014269] ata2.00: limiting speed to UDMA/100:PIO4
> [   20.014279] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
> [   20.014286] ata2.00: irq_stat 0x00000040, connection status changed
> [   20.014290] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   20.014299] ata2.00: failed command: READ FPDMA QUEUED
> [   20.014303] ata2.00: cmd 60/20:88:60:3d:5e/00:00:0b:00:00/40 tag 17 ncq dma 16384 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   20.014318] ata2.00: status: { DRDY }
> [   20.014327] ata2: hard resetting link
> [   20.910918] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   20.911959] ata2.00: configured for UDMA/100
> [   20.922108] sd 1:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   20.922118] sd 1:0:0:0: [sda] tag#17 Sense Key : Illegal Request [current] 
> [   20.922125] sd 1:0:0:0: [sda] tag#17 Add. Sense: Unaligned write command
> [   20.922131] sd 1:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 0b 5e 3d 60 00 00 20 00
> [   20.922135] I/O error, dev sda, sector 190725472 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
> [   20.922167] ata2: EH complete
> [   22.487591] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen
> [   22.487604] ata2.00: irq_stat 0x00000040, connection status changed
> [   22.487609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   22.487618] ata2.00: failed command: WRITE FPDMA QUEUED
> [   22.487622] ata2.00: cmd 61/08:68:f0:03:40/00:00:02:00:00/40 tag 13 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   22.487637] ata2.00: status: { DRDY }
> [   22.487647] ata2: hard resetting link
> [   23.384251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   23.385285] ata2.00: configured for UDMA/100
> [   23.395434] ata2: EH complete
> [   23.576270] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating.
> [   25.040943] ata2.00: exception Emask 0x10 SAct 0xd8 SErr 0x40d0002 action 0xe frozen
> [   25.040957] ata2.00: irq_stat 0x00000040, connection status changed
> [   25.040962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   25.040970] ata2.00: failed command: READ FPDMA QUEUED
> [   25.040974] ata2.00: cmd 60/08:18:88:f8:87/00:00:04:00:00/40 tag 3 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.040989] ata2.00: status: { DRDY }
> [   25.040994] ata2.00: failed command: READ FPDMA QUEUED
> [   25.040997] ata2.00: cmd 60/68:20:a8:a9:50/00:00:05:00:00/40 tag 4 ncq dma 53248 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.041011] ata2.00: status: { DRDY }
> [   25.041015] ata2.00: failed command: READ FPDMA QUEUED
> [   25.041018] ata2.00: cmd 60/b0:30:08:ac:50/02:00:05:00:00/40 tag 6 ncq dma 352256 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.041031] ata2.00: status: { DRDY }
> [   25.041035] ata2.00: failed command: READ FPDMA QUEUED
> [   25.041038] ata2.00: cmd 60/f0:38:b8:af:50/03:00:05:00:00/40 tag 7 ncq dma 516096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   25.041050] ata2.00: status: { DRDY }
> [   25.041059] ata2: hard resetting link
> [   25.907668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   25.908712] ata2.00: configured for UDMA/100
> [   25.918870] sd 1:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   25.918881] sd 1:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current] 
> [   25.918888] sd 1:0:0:0: [sda] tag#4 Add. Sense: Unaligned write command
> [   25.918894] sd 1:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00
> [   25.918898] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0
> [   25.918935] sd 1:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   25.918951] sd 1:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current] 
> [   25.918958] sd 1:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
> [   25.918965] sd 1:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00
> [   25.918969] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0
> [   25.918994] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   25.919001] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
> [   25.919007] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
> [   25.919014] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00
> [   25.919018] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 125 prio class 0
> [   25.919037] ata2: EH complete
> [   28.054255] ata2.00: exception Emask 0x10 SAct 0x180 SErr 0x40d0002 action 0xe frozen
> [   28.054267] ata2.00: irq_stat 0x00000040, connection status changed
> [   28.054272] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   28.054280] ata2.00: failed command: READ FPDMA QUEUED
> [   28.054284] ata2.00: cmd 60/f8:38:00:25:88/00:00:04:00:00/40 tag 7 ncq dma 126976 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   28.054299] ata2.00: status: { DRDY }
> [   28.054304] ata2.00: failed command: READ FPDMA QUEUED
> [   28.054307] ata2.00: cmd 60/08:40:f8:25:88/00:00:04:00:00/40 tag 8 ncq dma 4096 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   28.054321] ata2.00: status: { DRDY }
> [   28.054330] ata2: hard resetting link
> [   28.950942] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   28.951968] ata2.00: configured for UDMA/100
> [   28.962123] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   28.962133] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
> [   28.962139] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
> [   28.962145] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 04 88 25 00 00 00 f8 00
> [   28.962149] I/O error, dev sda, sector 76031232 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0
> [   28.962186] ata2: EH complete
> [   31.660931] ata2.00: limiting speed to UDMA/33:PIO4
> [   31.660942] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
> [   31.660948] ata2.00: irq_stat 0x00000040, connection status changed
> [   31.660952] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   31.660962] ata2.00: failed command: WRITE FPDMA QUEUED
> [   31.660965] ata2.00: cmd 61/20:88:f8:68:d1/00:00:06:00:00/40 tag 17 ncq dma 16384 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   31.660980] ata2.00: status: { DRDY }
> [   31.660989] ata2: hard resetting link
> [   32.557680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   32.558714] ata2.00: configured for UDMA/33
> [   32.568903] ata2: EH complete
> [   33.154256] ata2.00: exception Emask 0x10 SAct 0x38800000 SErr 0x40d0002 action 0xe frozen
> [   33.154269] ata2.00: irq_stat 0x00000040, connection status changed
> [   33.154273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   33.154284] ata2.00: failed command: WRITE FPDMA QUEUED
> [   33.154287] ata2.00: cmd 61/b8:b8:20:be:98/01:00:09:00:00/40 tag 23 ncq dma 225280 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   33.154302] ata2.00: status: { DRDY }
> [   33.154308] ata2.00: failed command: WRITE FPDMA QUEUED
> [   33.154311] ata2.00: cmd 61/08:d8:00:28:fc/00:00:0a:00:00/40 tag 27 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   33.154324] ata2.00: status: { DRDY }
> [   33.154329] ata2.00: failed command: WRITE FPDMA QUEUED
> [   33.154332] ata2.00: cmd 61/d8:e0:b0:8b:d6/01:00:08:00:00/40 tag 28 ncq dma 241664 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   33.154345] ata2.00: status: { DRDY }
> [   33.154349] ata2.00: failed command: WRITE FPDMA QUEUED
> [   33.154352] ata2.00: cmd 61/08:e8:10:78:9b/00:00:04:00:00/40 tag 29 ncq dma 4096 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   33.154364] ata2.00: status: { DRDY }
> [   33.154371] ata2: hard resetting link
> [   34.050956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   34.051959] ata2.00: configured for UDMA/33
> [   34.062160] ata2: EH complete
> [   37.637589] ata2.00: exception Emask 0x10 SAct 0x10400 SErr 0x40d0002 action 0xe frozen
> [   37.637602] ata2.00: irq_stat 0x00000040, connection status changed
> [   37.637606] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   37.637615] ata2.00: failed command: WRITE FPDMA QUEUED
> [   37.637618] ata2.00: cmd 61/18:50:20:69:d1/00:00:06:00:00/40 tag 10 ncq dma 12288 out
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   37.637633] ata2.00: status: { DRDY }
> [   37.637639] ata2.00: failed command: READ FPDMA QUEUED
> [   37.637643] ata2.00: cmd 60/20:80:90:f5:26/00:00:02:00:00/40 tag 16 ncq dma 16384 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   37.637656] ata2.00: status: { DRDY }
> [   37.637664] ata2: hard resetting link
> [   38.504247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   38.505282] ata2.00: configured for UDMA/33
> [   38.515438] sd 1:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   38.515448] sd 1:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current] 
> [   38.515455] sd 1:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
> [   38.515461] sd 1:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 02 26 f5 90 00 00 20 00
> [   38.515464] I/O error, dev sda, sector 36107664 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
> [   38.515492] ata2: EH complete
> [   40.834267] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen
> [   40.834280] ata2.00: irq_stat 0x00000040, connection status changed
> [   40.834285] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> [   40.834295] ata2.00: failed command: READ FPDMA QUEUED
> [   40.834299] ata2.00: cmd 60/20:a8:f8:3c:35/00:00:02:00:00/40 tag 21 ncq dma 16384 in
>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> [   40.834314] ata2.00: status: { DRDY }
> [   40.834323] ata2: hard resetting link
> [   41.730960] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [   41.732007] ata2.00: configured for UDMA/33
> [   41.742199] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
> [   41.742211] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] 
> [   41.742218] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command
> [   41.742224] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 35 3c f8 00 00 20 00
> [   41.742228] I/O error, dev sda, sector 37043448 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
> [   41.742263] ata2: EH complete

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Jens Axboe]

(Adding Damien, he's the ATA guy these days - leaving the below intact)

On 5/28/24 1:15 PM, Thomas Gleixner wrote:
> Tim!
> 
> On Tue, May 28 2024 at 17:43, Tim Teichmann wrote:
>> On 24/05/27 07:17pm, Thomas Gleixner wrote:
>> I've just tested the fix you've provided in the previous email.
>> The exact patches are attached to the ticket in the archlinux bugtracker[0].
> 
> Thanks! I will write a proper changelog and ship it.
> 
>> The error regarding CPU scheduling disappeared for both kernel verions[0].
>> However, the ATA bus error still occurs.
>>
>> Also, I suppose that the ATA bus error is the same as the previous one,
>> because the only value that changes in the exception message is SAct.
>>
>> This is the message of the ATA error before the patch:
>>
>>>> May 23 23:36:49 archlinux kernel: smpboot: x86: Booting SMP configuration:
>>>> May 23 23:36:49 archlinux kernel: .... node  #0, CPUs:      #2 #4 #6
>>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 2.55 No irq handler for vector
>>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 4.55 No irq handler for vector
>>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 6.55 No irq handler for vector
>>>>
>>>> ATA stuff:
>>>>
>>>> May 23 23:36:59 archlinux kernel: ata2.00: exception Emask 0x10 SAct 0x1fffe000 SErr 0x40d0002 action 0xe frozen
>>>
>>> That's probably just the fallout of the above.
> 
> It's in reality not related and I saw some other AHCI fallout fly by.
> 
>> And that's the message after the patch:
>>
>> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
>>
>> The full dmesg outputs are in the attachments.
> 
> Cc'ed the AHCI people and left the info around for them.
> 
>> Thank you,
>> Tim
>>
>>
>> [0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56#note_188563
>> [    0.000000] Linux version 6.9.2-arch1-1.2 (linux@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 18:36:31 +0000
>> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
>> [    0.000000] BIOS-provided physical RAM map:
>> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>> [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable
>> [    0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
>> [    0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
>> [    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
>> [    0.000000] NX (Execute Disable) protection: active
>> [    0.000000] APIC: Static calls initialized
>> [    0.000000] SMBIOS 2.4 present.
>> [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017
>> [    0.000000] tsc: Fast TSC calibration using PIT
>> [    0.000000] tsc: Detected 3322.271 MHz processor
>> [    0.002937] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>> [    0.002941] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [    0.002947] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
>> [    0.002956] total RAM covered: 3070M
>> [    0.003253] Found optimal setting for mtrr clean up
>> [    0.003254]  gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
>> [    0.003260] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs
>> [    0.003262] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>> [    0.004111] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
>> [    0.004120] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
>> [    0.007030] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
>> [    0.007051] Using GB pages for direct mapping
>> [    0.007376] RAMDISK: [mem 0x31c9f000-0x34e46fff]
>> [    0.007499] ACPI: Early table checksum verification disabled
>> [    0.007504] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT   )
>> [    0.007508] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007515] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007521] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>> [    0.007526] ACPI: FACS 0x00000000BFDF0000 000040
>> [    0.007529] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007534] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>> [    0.007538] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007542] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT    GBT   B0 5455312E BG?? 00000101)
>> [    0.007546] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007551] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
>> [    0.007554] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3]
>> [    0.007556] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6]
>> [    0.007558] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f]
>> [    0.007559] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14]
>> [    0.007560] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77]
>> [    0.007561] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb]
>> [    0.007562] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1]
>> [    0.007564] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb]
>> [    0.007565] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473]
>> [    0.007628] No NUMA configuration found
>> [    0.007629] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
>> [    0.007632] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff]
>> [    0.007673] Zone ranges:
>> [    0.007674]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>> [    0.007677]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>> [    0.007678]   Normal   [mem 0x0000000100000000-0x000000043effffff]
>> [    0.007680]   Device   empty
>> [    0.007682] Movable zone start for each node
>> [    0.007682] Early memory node ranges
>> [    0.007683]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>> [    0.007685]   node   0: [mem 0x0000000000100000-0x00000000bfdeffff]
>> [    0.007686]   node   0: [mem 0x0000000100000000-0x000000043effffff]
>> [    0.007689] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
>> [    0.007695] On node 0, zone DMA: 1 pages in unavailable ranges
>> [    0.007735] On node 0, zone DMA: 97 pages in unavailable ranges
>> [    0.054266] On node 0, zone Normal: 528 pages in unavailable ranges
>> [    0.054340] On node 0, zone Normal: 4096 pages in unavailable ranges
>> [    0.054523] ACPI: PM-Timer IO Port: 0x4008
>> [    0.054534] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>> [    0.054536] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>> [    0.054537] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>> [    0.054539] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>> [    0.054540] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>> [    0.054541] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>> [    0.054542] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>> [    0.054543] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>> [    0.054556] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>> [    0.054559] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [    0.054561] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> [    0.054566] ACPI: Using ACPI (MADT) for SMP configuration information
>> [    0.054567] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>> [    0.054577] CPU topo: Max. logical packages:   1
>> [    0.054578] CPU topo: Max. logical dies:       1
>> [    0.054579] CPU topo: Max. dies per package:   1
>> [    0.054584] CPU topo: Max. threads per core:   1
>> [    0.054585] CPU topo: Num. cores per package:     8
>> [    0.054586] CPU topo: Num. threads per package:   8
>> [    0.054587] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
>> [    0.054599] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
>> [    0.054601] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>> [    0.054602] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
>> [    0.054604] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>> [    0.054605] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
>> [    0.054606] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
>> [    0.054607] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
>> [    0.054608] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
>> [    0.054609] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>> [    0.054610] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
>> [    0.054611] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
>> [    0.054613] [mem 0xbff00000-0xdfffffff] available for PCI devices
>> [    0.054615] Booting paravirtualized kernel on bare hardware
>> [    0.054618] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>> [    0.060537] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>> [    0.061434] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
>> [    0.061443] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
>> [    0.061446] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
>> [    0.061468] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
>> [    0.061547] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
>> [    0.064351] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
>> [    0.065732] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
>> [    0.065812] Fallback order for Node 0: 0 
>> [    0.065818] Built 1 zonelists, mobility grouping on.  Total pages: 4123960
>> [    0.065820] Policy zone: Normal
>> [    0.066244] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
>> [    0.066251] software IO TLB: area num 8.
>> [    0.151668] Memory: 16301808K/16758328K available (18432K kernel code, 2164K rwdata, 13296K rodata, 3412K init, 3624K bss, 456260K reserved, 0K cma-reserved)
>> [    0.159910] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [    0.160107] ftrace: allocating 49852 entries in 195 pages
>> [    0.171323] ftrace: allocated 195 pages with 4 groups
>> [    0.171486] Dynamic Preempt: full
>> [    0.171715] rcu: Preemptible hierarchical RCU implementation.
>> [    0.171717] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
>> [    0.171718] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
>> [    0.171720] 	Trampoline variant of Tasks RCU enabled.
>> [    0.171720] 	Rude variant of Tasks RCU enabled.
>> [    0.171721] 	Tracing variant of Tasks RCU enabled.
>> [    0.171722] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
>> [    0.171723] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>> [    0.171731] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.171734] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.171736] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.177324] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
>> [    0.177539] rcu: srcu_init: Setting srcu_struct sizes based on contention.
>> [    0.177631] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
>> [    0.177707] spurious 8259A interrupt: IRQ7.
>> [    0.177727] Console: colour dummy device 80x25
>> [    0.177730] printk: legacy console [tty0] enabled
>> [    0.178132] ACPI: Core revision 20230628
>> [    0.178358] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
>> [    0.178391] APIC: Switch to symmetric I/O mode setup
>> [    0.178896] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [    0.195044] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe37b0bf9a, max_idle_ns: 440795315222 ns
>> [    0.195049] Calibrating delay loop (skipped), value calculated using timer frequency.. 6647.39 BogoMIPS (lpj=11074236)
>> [    0.195073] LVT offset 1 assigned for vector 0xf9
>> [    0.195078] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
>> [    0.195079] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
>> [    0.195084] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>> [    0.195087] Spectre V2 : Mitigation: Retpolines
>> [    0.195088] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>> [    0.195089] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>> [    0.195090] Spectre V2 : Enabling Speculation Barrier for firmware calls
>> [    0.195091] RETBleed: Mitigation: untrained return thunk
>> [    0.195093] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
>> [    0.195095] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
>> [    0.195099] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>> [    0.195101] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>> [    0.195102] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>> [    0.195104] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>> [    0.195106] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>> [    0.218738] Freeing SMP alternatives memory: 40K
>> [    0.218744] pid_max: default: 32768 minimum: 301
>> [    0.219474] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
>> [    0.220315] landlock: Up and running.
>> [    0.220317] Yama: becoming mindful.
>> [    0.220324] LSM support for eBPF active
>> [    0.220571] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>> [    0.220611] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>> [    0.228515] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms
>> [    0.228521] APIC delta adjusted to PM-Timer: 1261600 (1512)
>> [    0.228531] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
>> [    0.228924] Performance Events: Fam15h core perfctr, AMD PMU driver.
>> [    0.228930] ... version:                0
>> [    0.228931] ... bit width:              48
>> [    0.228932] ... generic registers:      6
>> [    0.228933] ... value mask:             0000ffffffffffff
>> [    0.228934] ... max period:             00007fffffffffff
>> [    0.228936] ... fixed-purpose events:   0
>> [    0.228936] ... event mask:             000000000000003f
>> [    0.229048] signal: max sigframe size: 1776
>> [    0.229102] rcu: Hierarchical SRCU implementation.
>> [    0.229104] rcu: 	Max phase no-delay instances is 1000.
>> [    0.231414] MCE: In-kernel MCE decoding enabled.
>> [    0.231495] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>> [    0.231629] smp: Bringing up secondary CPUs ...
>> [    0.231713] smpboot: x86: Booting SMP configuration:
>> [    0.231713] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>> [    0.000815] __common_interrupt: 1.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 2.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 3.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 4.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 5.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 6.55 No irq handler for vector
>> [    0.000815] __common_interrupt: 7.55 No irq handler for vector
>> [    0.262715] smp: Brought up 1 node, 8 CPUs
>> [    0.262715] smpboot: Total of 8 processors activated (53177.18 BogoMIPS)
>> [    0.266086] devtmpfs: initialized
>> [    0.266086] x86/mm: Memory block size: 128MB
>> [    0.269083] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
>> [    0.269083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>> [    0.269083] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
>> [    0.269083] pinctrl core: initialized pinctrl subsystem
>> [    0.269108] PM: RTC time: 14:51:09, date: 2024-05-28
>> [    0.269538] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>> [    0.269947] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
>> [    0.270211] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
>> [    0.270526] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
>> [    0.270538] audit: initializing netlink subsys (disabled)
>> [    0.271744] audit: type=2000 audit(1716907868.096:1): state=initialized audit_enabled=0 res=1
>> [    0.271862] thermal_sys: Registered thermal governor 'fair_share'
>> [    0.271864] thermal_sys: Registered thermal governor 'bang_bang'
>> [    0.271866] thermal_sys: Registered thermal governor 'step_wise'
>> [    0.271867] thermal_sys: Registered thermal governor 'user_space'
>> [    0.271868] thermal_sys: Registered thermal governor 'power_allocator'
>> [    0.271881] cpuidle: using governor ladder
>> [    0.271881] cpuidle: using governor menu
>> [    0.271881] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> [    0.272117] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
>> [    0.272122] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry
>> [    0.272140] PCI: Using configuration type 1 for base access
>> [    0.272340] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>> [    0.275131] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
>> [    0.275131] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
>> [    0.275131] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>> [    0.275131] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
>> [    0.275140] Demotion targets for Node 0: null
>> [    0.275248] fbcon: Taking over console
>> [    0.275248] ACPI: Added _OSI(Module Device)
>> [    0.275248] ACPI: Added _OSI(Processor Device)
>> [    0.275248] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [    0.275248] ACPI: Added _OSI(Processor Aggregator Device)
>> [    0.278535] ACPI: 2 ACPI AML tables successfully acquired and loaded
>> [    0.278811] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278818] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278824] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278830] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278842] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278848] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278854] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278859] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278871] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278877] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278882] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278888] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278899] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278905] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278910] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278916] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278927] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278933] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278938] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278944] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278955] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278961] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.278966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278972] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278983] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.278989] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.278994] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.278999] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.279021] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.279026] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.279038] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.279043] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.279049] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.279054] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.279065] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
>> [    0.279071] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
>> [    0.279076] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
>> [    0.279082] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
>> [    0.285252] ACPI: _OSC evaluation for CPUs failed, trying _PDC
>> [    0.285324] ACPI: Interpreter enabled
>> [    0.285345] ACPI: PM: (supports S0 S3 S4 S5)
>> [    0.285347] ACPI: Using IOAPIC for interrupt routing
>> [    0.285667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>> [    0.285669] PCI: Using E820 reservations for host bridge windows
>> [    0.285824] ACPI: Enabled 5 GPEs in block 00 to 1F
>> [    0.291427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [    0.291435] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
>> [    0.291811] PCI host bridge to bus 0000:00
>> [    0.291814] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>> [    0.291817] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>> [    0.291819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
>> [    0.291822] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
>> [    0.291824] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [    0.291842] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint
>> [    0.291854] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
>> [    0.291930] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port
>> [    0.291943] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.291947] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.291950] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>> [    0.291955] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.291961] pci 0000:00:02.0: enabling Extended Tags
>> [    0.291989] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>> [    0.292095] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port
>> [    0.292108] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.292112] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>> [    0.292115] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
>> [    0.292120] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.292126] pci 0000:00:04.0: enabling Extended Tags
>> [    0.292152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>> [    0.292253] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port
>> [    0.292266] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.292270] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.292272] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>> [    0.292277] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.292283] pci 0000:00:06.0: enabling Extended Tags
>> [    0.292309] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>> [    0.292433] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint
>> [    0.292450] pci 0000:00:11.0: BAR 0 [io  0xff00-0xff07]
>> [    0.292460] pci 0000:00:11.0: BAR 1 [io  0xfe00-0xfe03]
>> [    0.292469] pci 0000:00:11.0: BAR 2 [io  0xfd00-0xfd07]
>> [    0.292478] pci 0000:00:11.0: BAR 3 [io  0xfc00-0xfc03]
>> [    0.292487] pci 0000:00:11.0: BAR 4 [io  0xfb00-0xfb0f]
>> [    0.292497] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff]
>> [    0.292518] pci 0000:00:11.0: set SATA to AHCI mode
>> [    0.292622] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.292639] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff]
>> [    0.292770] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.292787] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff]
>> [    0.292927] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
>> [    0.292944] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff]
>> [    0.293023] pci 0000:00:12.2: supports D1 D2
>> [    0.293025] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>> [    0.293112] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.293129] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff]
>> [    0.293258] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.293275] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff]
>> [    0.293409] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
>> [    0.293426] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff]
>> [    0.293506] pci 0000:00:13.2: supports D1 D2
>> [    0.293508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>> [    0.293602] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
>> [    0.293762] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
>> [    0.293778] pci 0000:00:14.1: BAR 0 [io  0x0000-0x0007]
>> [    0.293788] pci 0000:00:14.1: BAR 1 [io  0x0000-0x0003]
>> [    0.293797] pci 0000:00:14.1: BAR 2 [io  0x0000-0x0007]
>> [    0.293806] pci 0000:00:14.1: BAR 3 [io  0x0000-0x0003]
>> [    0.293815] pci 0000:00:14.1: BAR 4 [io  0xfa00-0xfa0f]
>> [    0.293835] pci 0000:00:14.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
>> [    0.293837] pci 0000:00:14.1: BAR 1 [io  0x03f6]: legacy IDE quirk
>> [    0.293838] pci 0000:00:14.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
>> [    0.293840] pci 0000:00:14.1: BAR 3 [io  0x0376]: legacy IDE quirk
>> [    0.293949] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
>> [    0.293971] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit]
>> [    0.294037] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>> [    0.294116] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
>> [    0.294285] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
>> [    0.294316] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
>> [    0.294321] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>> [    0.294325] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>> [    0.294331] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.294416] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.294433] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff]
>> [    0.294564] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294614] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294661] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294710] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294759] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294808] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294917] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint
>> [    0.294930] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
>> [    0.294941] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
>> [    0.294952] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref]
>> [    0.294960] pci 0000:01:00.0: BAR 5 [io  0xef00-0xef7f]
>> [    0.294967] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref]
>> [    0.294995] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>> [    0.295075] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
>> [    0.295151] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
>> [    0.295165] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff]
>> [    0.295315] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.295357] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
>> [    0.295372] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit]
>> [    0.295433] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.295503] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.295552] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
>> [    0.295568] pci 0000:03:00.0: BAR 0 [io  0xce00-0xceff]
>> [    0.295589] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit]
>> [    0.295602] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref]
>> [    0.295684] pci 0000:03:00.0: supports D1 D2
>> [    0.295685] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.295808] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.295824] pci_bus 0000:04: extended config space not accessible
>> [    0.295886] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
>> [    0.295895] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>> [    0.295897] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>> [    0.295900] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
>> [    0.295902] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
>> [    0.296188] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
>> [    0.296190] ACPI: PCI: Interrupt link LNKA disabled
>> [    0.296247] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
>> [    0.296249] ACPI: PCI: Interrupt link LNKB disabled
>> [    0.296306] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
>> [    0.296308] ACPI: PCI: Interrupt link LNKC disabled
>> [    0.296363] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
>> [    0.296365] ACPI: PCI: Interrupt link LNKD disabled
>> [    0.296421] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
>> [    0.296422] ACPI: PCI: Interrupt link LNKE disabled
>> [    0.296477] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
>> [    0.296479] ACPI: PCI: Interrupt link LNKF disabled
>> [    0.296535] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
>> [    0.296536] ACPI: PCI: Interrupt link LNK0 disabled
>> [    0.296591] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
>> [    0.296592] ACPI: PCI: Interrupt link LNK1 disabled
>> [    0.298404] iommu: Default domain type: Translated
>> [    0.298404] iommu: DMA domain TLB invalidation policy: lazy mode
>> [    0.298664] SCSI subsystem initialized
>> [    0.298672] libata version 3.00 loaded.
>> [    0.298672] ACPI: bus type USB registered
>> [    0.298672] usbcore: registered new interface driver usbfs
>> [    0.298672] usbcore: registered new interface driver hub
>> [    0.298672] usbcore: registered new device driver usb
>> [    0.298672] EDAC MC: Ver: 3.0.0
>> [    0.299557] NetLabel: Initializing
>> [    0.299557] NetLabel:  domain hash size = 128
>> [    0.299557] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>> [    0.299557] NetLabel:  unlabeled traffic allowed by default
>> [    0.299557] mctp: management component transport protocol core
>> [    0.299557] NET: Registered PF_MCTP protocol family
>> [    0.299557] PCI: Using ACPI for IRQ routing
>> [    0.306688] PCI: pci_cache_line_size set to 64 bytes
>> [    0.306740] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>> [    0.306743] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff]
>> [    0.306744] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
>> [    0.308426] pci 0000:01:00.0: vgaarb: setting as boot VGA device
>> [    0.308426] pci 0000:01:00.0: vgaarb: bridge control possible
>> [    0.308426] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>> [    0.308426] vgaarb: loaded
>> [    0.308429] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> [    0.308434] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>> [    0.311840] clocksource: Switched to clocksource tsc-early
>> [    0.313225] VFS: Disk quotas dquot_6.6.0
>> [    0.313287] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [    0.313388] pnp: PnP ACPI init
>> [    0.313472] system 00:00: [io  0x04d0-0x04d1] has been reserved
>> [    0.313475] system 00:00: [io  0x0220-0x0225] has been reserved
>> [    0.313478] system 00:00: [io  0x0290-0x0294] has been reserved
>> [    0.313783] system 00:01: [io  0x4100-0x411f] has been reserved
>> [    0.313790] system 00:01: [io  0x0228-0x022f] has been reserved
>> [    0.313793] system 00:01: [io  0x040b] has been reserved
>> [    0.313795] system 00:01: [io  0x04d6] has been reserved
>> [    0.313797] system 00:01: [io  0x0c00-0x0c01] has been reserved
>> [    0.313799] system 00:01: [io  0x0c14] has been reserved
>> [    0.313801] system 00:01: [io  0x0c50-0x0c52] has been reserved
>> [    0.313803] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
>> [    0.313805] system 00:01: [io  0x0c6f] has been reserved
>> [    0.313807] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
>> [    0.313809] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
>> [    0.313810] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
>> [    0.313812] system 00:01: [io  0x4000-0x40fe] has been reserved
>> [    0.313814] system 00:01: [io  0x4210-0x4217] has been reserved
>> [    0.313816] system 00:01: [io  0x0b00-0x0b0f] has been reserved
>> [    0.313818] system 00:01: [io  0x0b10-0x0b1f] has been reserved
>> [    0.313820] system 00:01: [io  0x0b20-0x0b3f] has been reserved
>> [    0.313822] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved
>> [    0.313825] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
>> [    0.314737] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>> [    0.314963] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
>> [    0.314986] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
>> [    0.314989] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
>> [    0.314991] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
>> [    0.314993] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
>> [    0.314996] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
>> [    0.314998] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
>> [    0.315000] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved
>> [    0.315003] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved
>> [    0.315005] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved
>> [    0.315007] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>> [    0.315009] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
>> [    0.315011] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
>> [    0.315035] pnp: PnP ACPI: found 7 devices
>> [    0.321759] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>> [    0.322043] NET: Registered PF_INET protocol family
>> [    0.322351] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>> [    0.339864] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
>> [    0.339910] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
>> [    0.340073] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
>> [    0.340507] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
>> [    0.340824] TCP: Hash tables configured (established 131072 bind 65536)
>> [    0.341042] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
>> [    0.341169] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
>> [    0.341254] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
>> [    0.341355] NET: Registered PF_UNIX/PF_LOCAL protocol family
>> [    0.341370] NET: Registered PF_XDP protocol family
>> [    0.341386] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.341391] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.341395] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>> [    0.341398] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.341403] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.341405] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>> [    0.341408] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
>> [    0.341411] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.341414] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.341417] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.341419] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>> [    0.341422] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.341426] pci 0000:00:14.4: PCI bridge to [bus 04]
>> [    0.341429] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>> [    0.341434] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>> [    0.341438] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.341445] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>> [    0.341447] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>> [    0.341449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
>> [    0.341452] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
>> [    0.341454] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>> [    0.341456] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
>> [    0.341457] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.341459] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>> [    0.341461] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
>> [    0.341463] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.341465] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>> [    0.341467] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
>> [    0.341469] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.341471] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>> [    0.341473] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
>> [    0.341474] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.341476] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
>> [    0.341478] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
>> [    0.341480] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
>> [    0.341482] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
>> [    0.364641] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 22551 usecs
>> [    0.384684] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 19559 usecs
>> [    0.404731] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 19371 usecs
>> [    0.424781] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 19569 usecs
>> [    0.444850] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 19381 usecs
>> [    0.444885] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
>> [    0.444921] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
>> [    0.445120] PCI: CLS 64 bytes, default 64
>> [    0.445128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [    0.445129] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB)
>> [    0.445171] LVT offset 0 assigned for vector 0x400
>> [    0.445205] Trying to unpack rootfs image as initramfs...
>> [    0.449662] perf: AMD IBS detected (0x000000ff)
>> [    0.451294] Initialise system trusted keyrings
>> [    0.451307] Key type blacklist registered
>> [    0.451387] workingset: timestamp_bits=41 max_order=22 bucket_order=0
>> [    0.451400] zbud: loaded
>> [    0.451792] fuse: init (API version 7.40)
>> [    0.452284] integrity: Platform Keyring initialized
>> [    0.452291] integrity: Machine keyring initialized
>> [    0.467117] Key type asymmetric registered
>> [    0.467119] Asymmetric key parser 'x509' registered
>> [    0.467204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
>> [    0.467299] io scheduler mq-deadline registered
>> [    0.467301] io scheduler kyber registered
>> [    0.467357] io scheduler bfq registered
>> [    0.468354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>> [    0.468472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [    0.468506] ACPI: button: Power Button [PWRB]
>> [    0.468558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [    0.470399] ACPI: button: Power Button [PWRF]
>> [    0.470470] ACPI: \_PR_.C000: Found 2 idle states
>> [    0.470564] ACPI: \_PR_.C001: Found 2 idle states
>> [    0.470635] ACPI: \_PR_.C002: Found 2 idle states
>> [    0.470712] ACPI: \_PR_.C003: Found 2 idle states
>> [    0.470792] ACPI: \_PR_.C004: Found 2 idle states
>> [    0.470863] ACPI: \_PR_.C005: Found 2 idle states
>> [    0.470937] ACPI: \_PR_.C006: Found 2 idle states
>> [    0.471006] ACPI: \_PR_.C007: Found 2 idle states
>> [    0.471398] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>> [    0.471585] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>> [    0.474648] Non-volatile memory driver v1.3
>> [    0.474650] Linux agpgart interface v0.103
>> [    0.474750] ACPI: bus type drm_connector registered
>> [    0.475607] ahci 0000:00:11.0: version 3.0
>> [    0.475894] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
>> [    0.475900] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf)
>> [    0.475903] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>> [    0.476572] scsi host0: ahci
>> [    0.476799] scsi host1: ahci
>> [    0.476957] scsi host2: ahci
>> [    0.477175] scsi host3: ahci
>> [    0.477232] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3
>> [    0.477236] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3
>> [    0.477239] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3
>> [    0.477242] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3
>> [    0.477489] ohci-pci 0000:00:12.0: OHCI PCI host controller
>> [    0.477498] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
>> [    0.477543] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
>> [    0.536033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
>> [    0.536046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.536053] usb usb1: Product: OHCI PCI host controller
>> [    0.536058] usb usb1: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
>> [    0.536063] usb usb1: SerialNumber: 0000:00:12.0
>> [    0.536600] hub 1-0:1.0: USB hub found
>> [    0.536614] hub 1-0:1.0: 3 ports detected
>> [    0.537585] ehci-pci 0000:00:12.2: EHCI Host Controller
>> [    0.537618] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
>> [    0.537631] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [    0.537651] ehci-pci 0000:00:12.2: debug port 1
>> [    0.537772] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
>> [    0.540855] Freeing initrd memory: 50848K
>> [    0.548534] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
>> [    0.548672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
>> [    0.548675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.548677] usb usb2: Product: EHCI Host Controller
>> [    0.548679] usb usb2: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd
>> [    0.548680] usb usb2: SerialNumber: 0000:00:12.2
>> [    0.548923] hub 2-0:1.0: USB hub found
>> [    0.548931] hub 2-0:1.0: 6 ports detected
>> [    0.615460] hub 1-0:1.0: USB hub found
>> [    0.615471] hub 1-0:1.0: 3 ports detected
>> [    0.615594] ehci-pci 0000:00:13.2: EHCI Host Controller
>> [    0.615599] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
>> [    0.615603] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [    0.615614] ehci-pci 0000:00:13.2: debug port 1
>> [    0.615676] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
>> [    0.628733] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
>> [    0.628840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
>> [    0.628843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.628845] usb usb3: Product: EHCI Host Controller
>> [    0.628846] usb usb3: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd
>> [    0.628848] usb usb3: SerialNumber: 0000:00:13.2
>> [    0.629065] hub 3-0:1.0: USB hub found
>> [    0.629079] hub 3-0:1.0: 6 ports detected
>> [    0.629268] ohci-pci 0000:00:12.1: OHCI PCI host controller
>> [    0.629273] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
>> [    0.629292] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
>> [    0.689602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
>> [    0.689606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.689608] usb usb4: Product: OHCI PCI host controller
>> [    0.689610] usb usb4: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
>> [    0.689611] usb usb4: SerialNumber: 0000:00:12.1
>> [    0.689768] hub 4-0:1.0: USB hub found
>> [    0.689778] hub 4-0:1.0: 3 ports detected
>> [    0.690103] ohci-pci 0000:00:13.0: OHCI PCI host controller
>> [    0.690108] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
>> [    0.690144] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
>> [    0.749775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
>> [    0.749779] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.749782] usb usb5: Product: OHCI PCI host controller
>> [    0.749783] usb usb5: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
>> [    0.749785] usb usb5: SerialNumber: 0000:00:13.0
>> [    0.749940] hub 5-0:1.0: USB hub found
>> [    0.749949] hub 5-0:1.0: 3 ports detected
>> [    0.750237] ohci-pci 0000:00:13.1: OHCI PCI host controller
>> [    0.750246] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
>> [    0.750266] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
>> [    0.794105] ata1: SATA link down (SStatus 0 SControl 300)
>> [    0.795664] ata4: SATA link down (SStatus 0 SControl 300)
>> [    0.800164] usb 2-1: new high-speed USB device number 2 using ehci-pci
>> [    0.809908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
>> [    0.809912] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.809915] usb usb6: Product: OHCI PCI host controller
>> [    0.809916] usb usb6: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
>> [    0.809918] usb usb6: SerialNumber: 0000:00:13.1
>> [    0.810076] hub 6-0:1.0: USB hub found
>> [    0.810086] hub 6-0:1.0: 3 ports detected
>> [    0.810362] ohci-pci 0000:00:14.5: OHCI PCI host controller
>> [    0.810368] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
>> [    0.810387] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
>> [    0.870052] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
>> [    0.870056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.870058] usb usb7: Product: OHCI PCI host controller
>> [    0.870059] usb usb7: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd
>> [    0.870061] usb usb7: SerialNumber: 0000:00:14.5
>> [    0.870224] hub 7-0:1.0: USB hub found
>> [    0.870233] hub 7-0:1.0: 2 ports detected
>> [    0.870434] usbcore: registered new interface driver usbserial_generic
>> [    0.870442] usbserial: USB Serial support registered for generic
>> [    0.870541] rtc_cmos 00:02: RTC can wake from S4
>> [    0.870777] rtc_cmos 00:02: registered as rtc0
>> [    0.870804] rtc_cmos 00:02: setting system clock to 2024-05-28T14:51:09 UTC (1716907869)
>> [    0.870840] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
>> [    0.870893] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
>> [    0.871046] ledtrig-cpu: registered to indicate activity on CPUs
>> [    0.871556] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
>> [    0.876504] Console: switching to colour frame buffer device 160x64
>> [    0.880130] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
>> [    0.880250] hid: raw HID events driver (C) Jiri Kosina
>> [    0.880368] drop_monitor: Initializing network drop monitor service
>> [    0.880708] NET: Registered PF_INET6 protocol family
>> [    0.888817] Segment Routing with IPv6
>> [    0.888821] RPL Segment Routing with IPv6
>> [    0.888841] In-situ OAM (IOAM) with IPv6
>> [    0.888871] NET: Registered PF_PACKET protocol family
>> [    0.888928] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
>> [    0.889431] microcode: Current revision: 0x06000852
>> [    0.889434] microcode: Updated early from: 0x06000822
>> [    0.889571] IPI shorthand broadcast: enabled
>> [    0.892436] sched_clock: Marking stable (892072218, -2517491)->(1803923840, -914369113)
>> [    0.892699] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
>> [    0.892802] registered taskstats version 1
>> [    0.893127] Loading compiled-in X.509 certificates
>> [    0.897827] Loaded X.509 cert 'Build time autogenerated kernel key: d8f226d306ee433c4f9e55c6647f7453aebee28a'
>> [    0.900456] Key type .fscrypt registered
>> [    0.900458] Key type fscrypt-provisioning registered
>> [    0.901003] PM:   Magic number: 8:921:890
>> [    0.904937] RAS: Correctable Errors collector initialized.
>> [    0.917594] clk: Disabling unused clocks
>> [    0.917598] PM: genpd: Disabling unused power domains
>> [    0.948241] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
>> [    0.948246] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [    0.948248] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter
>> [    0.948250] usb 2-1: Manufacturer: Realtek
>> [    0.948252] usb 2-1: SerialNumber: 123456
>> [    0.957220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    0.957984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    0.958027] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
>> [    0.958069] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
>> [    0.958100] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
>> [    0.958298] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
>> [    0.958709] ata2.00: configured for UDMA/133
>> [    0.959337] ata3.00: configured for UDMA/133
>> [    0.971555] scsi 1:0:0:0: Direct-Access     ATA      Apacer AS340 120 2PE0 PQ: 0 ANSI: 5
>> [    0.972039] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
>> [    0.972044] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
>> [    0.972052] sd 1:0:0:0: [sda] Write Protect is off
>> [    0.972055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    0.972072] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [    0.972104] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>> [    0.972382] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>> [    0.972385] sd 2:0:0:0: [sdb] 4096-byte physical blocks
>> [    0.972397] sd 2:0:0:0: [sdb] Write Protect is off
>> [    0.972400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> [    0.972418] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [    0.972450] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
>> [    0.972747]  sda: sda1 sda2
>> [    0.972878] sd 1:0:0:0: [sda] Attached SCSI disk
>> [    0.979721]  sdb: sdb1 sdb2
>> [    0.979888] sd 2:0:0:0: [sdb] Attached SCSI disk
>> [    0.982113] Freeing unused decrypted memory: 2028K
>> [    0.982813] Freeing unused kernel image (initmem) memory: 3412K
>> [    0.982817] Write protecting the kernel read-only data: 32768k
>> [    0.983274] Freeing unused kernel image (rodata/data gap) memory: 1040K
>> [    1.024159] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>> [    1.024163] rodata_test: all tests were successful
>> [    1.024167] Run /init as init process
>> [    1.024168]   with arguments:
>> [    1.024169]     /init
>> [    1.024171]   with environment:
>> [    1.024171]     HOME=/
>> [    1.024172]     TERM=linux
>> [    1.024173]     BOOT_IMAGE=/vmlinuz-linux
>> [    1.192020] xhci_hcd 0000:02:00.0: xHCI Host Controller
>> [    1.192030] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
>> [    1.192114] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
>> [    1.192303] xhci_hcd 0000:02:00.0: xHCI Host Controller
>> [    1.192309] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
>> [    1.192314] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
>> [    1.192427] scsi host4: pata_atiixp
>> [    1.192590] scsi host5: pata_atiixp
>> [    1.192637] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0
>> [    1.192640] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0
>> [    1.192805] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
>> [    1.192810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    1.192812] usb usb8: Product: xHCI Host Controller
>> [    1.192814] usb usb8: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd
>> [    1.192816] usb usb8: SerialNumber: 0000:02:00.0
>> [    1.192970] hub 8-0:1.0: USB hub found
>> [    1.192982] hub 8-0:1.0: 1 port detected
>> [    1.193137] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
>> [    1.193141] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    1.193143] usb usb9: Product: xHCI Host Controller
>> [    1.193145] usb usb9: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd
>> [    1.193147] usb usb9: SerialNumber: 0000:02:00.0
>> [    1.193622] hub 9-0:1.0: USB hub found
>> [    1.193636] hub 9-0:1.0: 4 ports detected
>> [    1.280961] usb 1-3: new low-speed USB device number 2 using ohci-pci
>> [    1.437586] usb 8-1: new high-speed USB device number 2 using xhci_hcd
>> [    1.454253] tsc: Refined TSC clocksource calibration: 3322.063 MHz
>> [    1.454279] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b689782, max_idle_ns: 440795272807 ns
>> [    1.454361] clocksource: Switched to clocksource tsc
>> [    1.471291] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06
>> [    1.471296] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>> [    1.471298] usb 1-3: Product: USB Keyboard
>> [    1.494609] usbcore: registered new interface driver usbhid
>> [    1.494612] usbhid: USB HID core driver
>> [    1.500400] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2
>> [    1.554498] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0
>> [    1.554894] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3
>> [    1.578903] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
>> [    1.578907] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>> [    1.578909] usb 8-1: Product: USB2.0 Hub
>> [    1.579618] hub 8-1:1.0: USB hub found
>> [    1.579800] hub 8-1:1.0: 4 ports detected
>> [    1.611140] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4
>> [    1.611211] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6
>> [    1.611349] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1
>> [    2.100930] usb 4-1: new full-speed USB device number 2 using ohci-pci
>> [    2.295746] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00
>> [    2.295758] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [    2.295764] usb 4-1: Product: USB Gaming Mouse
>> [    2.295769] usb 4-1: Manufacturer: RH
>> [    2.303143] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7
>> [    2.358069] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0
>> [    2.364463] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8
>> [    2.364541] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9
>> [    2.421242] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10
>> [    2.421361] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1
>> [    2.425111] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2
>> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
>> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
>> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
>> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    2.964307] ata2.00: status: { DRDY }
>> [    2.964318] ata2: hard resetting link
>> [    3.860936] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    3.861698] ata2.00: configured for UDMA/133
>> [    3.871801] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    3.871805] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
>> [    3.871808] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
>> [    3.871810] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00
>> [    3.871812] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    3.871832] ata2: EH complete
>> [    4.047485] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none.
>> [    4.217266] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
>> [    4.217273] systemd[1]: Detected architecture x86-64.
>> [    4.801003] systemd[1]: bpf-lsm: LSM BPF program attached
>> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
>> [    4.877597] ata2.00: irq_stat 0x00000040, connection status changed
>> [    4.877601] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    4.877613] ata2.00: failed command: READ FPDMA QUEUED
>> [    4.877616] ata2.00: cmd 60/08:f8:50:f9:08/00:00:07:00:00/40 tag 31 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    4.877632] ata2.00: status: { DRDY }
>> [    4.877639] ata2: hard resetting link
>> [    5.774299] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    5.775081] ata2.00: configured for UDMA/133
>> [    5.785188] ata2: EH complete
>> [    5.836831] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
>> [    5.837835] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
>> [    6.534243] random: crng init done
>> [    6.607583] ata2.00: exception Emask 0x10 SAct 0x6000000 SErr 0x40d0002 action 0xe frozen
>> [    6.607595] ata2.00: irq_stat 0x00000040, connection status changed
>> [    6.607600] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    6.607611] ata2.00: failed command: READ FPDMA QUEUED
>> [    6.607615] ata2.00: cmd 60/40:c8:28:3d:9c/00:00:01:00:00/40 tag 25 ncq dma 32768 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    6.607630] ata2.00: status: { DRDY }
>> [    6.607635] ata2.00: failed command: READ FPDMA QUEUED
>> [    6.607638] ata2.00: cmd 60/08:d0:30:04:ad/00:00:01:00:00/40 tag 26 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    6.607652] ata2.00: status: { DRDY }
>> [    6.607660] ata2: hard resetting link
>> [    7.504453] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    7.505241] ata2.00: configured for UDMA/133
>> [    7.515397] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    7.515401] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] 
>> [    7.515404] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
>> [    7.515406] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00
>> [    7.515407] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0
>> [    7.515417] sd 1:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    7.515419] sd 1:0:0:0: [sda] tag#26 Sense Key : Illegal Request [current] 
>> [    7.515421] sd 1:0:0:0: [sda] tag#26 Add. Sense: Unaligned write command
>> [    7.515423] sd 1:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00
>> [    7.515424] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    7.515440] ata2: EH complete
>> [    7.529998] zram: Added device: zram0
>> [    7.691188] systemd[1]: Queued start job for default target Graphical Interface.
>> [    7.725534] systemd[1]: Created slice Slice /system/dirmngr.
>> [    7.725909] systemd[1]: Created slice Slice /system/getty.
>> [    7.726235] systemd[1]: Created slice Slice /system/gpg-agent.
>> [    7.726555] systemd[1]: Created slice Slice /system/gpg-agent-browser.
>> [    7.726882] systemd[1]: Created slice Slice /system/gpg-agent-extra.
>> [    7.727202] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
>> [    7.727571] systemd[1]: Created slice Slice /system/keyboxd.
>> [    7.727960] systemd[1]: Created slice Slice /system/modprobe.
>> [    7.728334] systemd[1]: Created slice Slice /system/systemd-fsck.
>> [    7.728726] systemd[1]: Created slice Slice /system/systemd-zram-setup.
>> [    7.729003] systemd[1]: Created slice User and Session Slice.
>> [    7.729063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>> [    7.729108] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>> [    7.729268] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>> [    7.729287] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862...
>> [    7.729295] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA...
>> [    7.729302] systemd[1]: Expecting device /dev/zram0...
>> [    7.729313] systemd[1]: Reached target Local Encrypted Volumes.
>> [    7.729329] systemd[1]: Reached target Local Integrity Protected Volumes.
>> [    7.729358] systemd[1]: Reached target Path Units.
>> [    7.729374] systemd[1]: Reached target Remote File Systems.
>> [    7.729384] systemd[1]: Reached target Slice Units.
>> [    7.729414] systemd[1]: Reached target Local Verity Protected Volumes.
>> [    7.729483] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>> [    7.729825] systemd[1]: Listening on LVM2 poll daemon socket.
>> [    7.731601] systemd[1]: Listening on Process Core Dump Socket.
>> [    7.731717] systemd[1]: Listening on Journal Socket (/dev/log).
>> [    7.731826] systemd[1]: Listening on Journal Socket.
>> [    7.731962] systemd[1]: Listening on Network Service Netlink Socket.
>> [    7.731983] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    7.732283] systemd[1]: Listening on udev Control Socket.
>> [    7.732367] systemd[1]: Listening on udev Kernel Socket.
>> [    7.733670] systemd[1]: Mounting Huge Pages File System...
>> [    7.734432] systemd[1]: Mounting POSIX Message Queue File System...
>> [    7.735214] systemd[1]: Mounting Kernel Debug File System...
>> [    7.735940] systemd[1]: Mounting Kernel Trace File System...
>> [    7.737094] systemd[1]: Starting Create List of Static Device Nodes...
>> [    7.738109] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>> [    7.739275] systemd[1]: Starting Load Kernel Module configfs...
>> [    7.741004] systemd[1]: Starting Load Kernel Module dm_mod...
>> [    7.743396] systemd[1]: Starting Load Kernel Module drm...
>> [    7.744638] systemd[1]: Starting Load Kernel Module fuse...
>> [    7.745618] systemd[1]: Starting Load Kernel Module loop...
>> [    7.745672] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
>> [    7.747541] systemd[1]: Starting Journal Service...
>> [    7.749286] systemd[1]: Starting Load Kernel Modules...
>> [    7.750456] systemd[1]: Starting Generate network units from Kernel command line...
>> [    7.750488] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    7.752304] systemd[1]: Starting Remount Root and Kernel File Systems...
>> [    7.752407] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    7.753791] systemd[1]: Starting Coldplug All udev Devices...
>> [    7.755944] systemd[1]: Mounted Huge Pages File System.
>> [    7.756096] systemd[1]: Mounted POSIX Message Queue File System.
>> [    7.756210] systemd[1]: Mounted Kernel Debug File System.
>> [    7.756338] systemd[1]: Mounted Kernel Trace File System.
>> [    7.756613] systemd[1]: Finished Create List of Static Device Nodes.
>> [    7.757040] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>> [    7.757405] systemd[1]: Finished Load Kernel Module configfs.
>> [    7.757836] systemd[1]: modprobe@drm.service: Deactivated successfully.
>> [    7.760195] systemd[1]: Finished Load Kernel Module drm.
>> [    7.760583] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>> [    7.760775] systemd[1]: Finished Load Kernel Module fuse.
>> [    7.763032] systemd[1]: Mounting FUSE Control File System...
>> [    7.764696] systemd[1]: Mounting Kernel Configuration File System...
>> [    7.765008] loop: module loaded
>> [    7.765817] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
>> [    7.766294] systemd[1]: modprobe@loop.service: Deactivated successfully.
>> [    7.766508] systemd[1]: Finished Load Kernel Module loop.
>> [    7.766833] systemd[1]: Finished Generate network units from Kernel command line.
>> [    7.773114] device-mapper: uevent: version 1.0.3
>> [    7.773226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
>> [    7.773364] systemd[1]: Mounted FUSE Control File System.
>> [    7.773500] systemd[1]: Mounted Kernel Configuration File System.
>> [    7.773999] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
>> [    7.774199] systemd[1]: Finished Load Kernel Module dm_mod.
>> [    7.774797] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
>> [    7.777678] sd 1:0:0:0: Attached scsi generic sg0 type 0
>> [    7.777730] sd 2:0:0:0: Attached scsi generic sg1 type 0
>> [    7.782295] systemd-journald[292]: Collecting audit messages is disabled.
>> [    7.789658] Asymmetric key parser 'pkcs8' registered
>> [    7.790664] systemd[1]: Finished Load Kernel Modules.
>> [    7.791862] systemd[1]: Starting Apply Kernel Variables...
>> [    7.797660] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none.
>> [    7.798776] systemd[1]: Finished Remount Root and Kernel File Systems.
>> [    7.799828] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
>> [    7.800904] systemd[1]: Starting Load/Save OS Random Seed...
>> [    7.800930] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    7.806934] systemd[1]: Finished Apply Kernel Variables.
>> [    7.820293] systemd[1]: Finished Load/Save OS Random Seed.
>> [    7.822716] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
>> [    7.823917] systemd[1]: Starting Create System Users...
>> [    7.853147] systemd[1]: Finished Create System Users.
>> [    7.854285] systemd[1]: Starting Create Static Device Nodes in /dev...
>> [    7.854815] systemd[1]: Started Journal Service.
>> [    7.866721] systemd-journald[292]: Received client request to flush runtime journal.
>> [    7.876074] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating.
>> [    7.876080] systemd-journald[292]: Rotating system journal.
>> [    8.006678] zram0: detected capacity change from 0 to 8388608
>> [    8.056885] mousedev: PS/2 mouse device common for all mice
>> [    8.058328] parport_pc 00:04: reported by Plug and Play ACPI
>> [    8.060958] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>> [    8.090400] input: PC Speaker as /devices/platform/pcspkr/input/input12
>> [    8.090811] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20230628/utaddress-204)
>> [    8.090837] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>> [    8.093857] cryptd: max_cpu_qlen set to 1000
>> [    8.095908] acpi_cpufreq: overriding BIOS provided _PSD data
>> [    8.099121] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
>> [    8.099423] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
>> [    8.099428] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
>> [    8.123581] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>> [    8.123771] AVX version of gcm_enc/dec engaged.
>> [    8.123835] AES CTR mode by8 optimization enabled
>> [    8.147638] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28
>> [    8.147648] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
>> [    8.153349] r8169 0000:03:00.0 enp3s0: renamed from eth0
>> [    8.188043] ppdev: user-space parallel port driver
>> [    8.193397] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
>> [    8.198244] snd_hda_intel 0000:01:00.1: Disabling MSI
>> [    8.198265] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
>> [    8.226060] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
>> [    8.226734] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
>> [    8.226821] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
>> [    8.226880] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
>> [    8.241879] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>> [    8.241886] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> [    8.241889] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>> [    8.241891] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>> [    8.241893] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
>> [    8.241895] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>> [    8.241897] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
>> [    8.241899] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
>> [    8.241901] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>> [    8.321663] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
>> [    8.321807] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
>> [    8.321864] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
>> [    8.321932] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
>> [    8.321994] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
>> [    8.376761] kvm_amd: TSC scaling supported
>> [    8.376766] kvm_amd: Nested Virtualization enabled
>> [    8.376768] kvm_amd: Nested Paging enabled
>> [    8.376774] kvm_amd: LBR virtualization supported
>> [    8.916596] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none.
>> [    9.007654] ata2: limiting SATA link speed to 1.5 Gbps
>> [    9.007664] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen
>> [    9.007671] ata2.00: irq_stat 0x00000040, connection status changed
>> [    9.007676] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    9.007685] ata2.00: failed command: READ FPDMA QUEUED
>> [    9.007689] ata2.00: cmd 60/08:a8:78:9f:ae/00:00:02:00:00/40 tag 21 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    9.007704] ata2.00: status: { DRDY }
>> [    9.007713] ata2: hard resetting link
>> [    9.904302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [    9.905397] ata2.00: configured for UDMA/133
>> [    9.915594] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    9.915606] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] 
>> [    9.915613] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command
>> [    9.915620] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00
>> [    9.915624] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    9.915657] ata2: EH complete
>> [   10.864909] NET: Registered PF_ALG protocol family
>> [   10.960863] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>> [   11.157627] r8169 0000:03:00.0 enp3s0: Link is Down
>> [   14.170915] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen
>> [   14.170929] ata2.00: irq_stat 0x00000040, connection status changed
>> [   14.170934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   14.170945] ata2.00: failed command: READ FPDMA QUEUED
>> [   14.170949] ata2.00: cmd 60/00:e0:00:39:7f/0a:00:01:00:00/40 tag 28 ncq dma 1310720 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   14.170964] ata2.00: status: { DRDY }
>> [   14.170973] ata2: hard resetting link
>> [   15.067652] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   15.068694] ata2.00: configured for UDMA/133
>> [   15.078850] sd 1:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   15.078861] sd 1:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current] 
>> [   15.078868] sd 1:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
>> [   15.078875] sd 1:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 01 7f 39 00 00 0a 00 00
>> [   15.078879] I/O error, dev sda, sector 25114880 op 0x0:(READ) flags 0x80700 phys_seg 36 prio class 0
>> [   15.078930] ata2: EH complete
>> [   15.660926] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen
>> [   15.660939] ata2.00: irq_stat 0x00000040, connection status changed
>> [   15.660944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   15.660955] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   15.660959] ata2.00: cmd 61/10:e0:08:97:a2/00:00:08:00:00/40 tag 28 ncq dma 8192 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   15.660974] ata2.00: status: { DRDY }
>> [   15.660982] ata2: hard resetting link
>> [   16.557602] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   16.558620] ata2.00: configured for UDMA/133
>> [   16.568804] ata2: EH complete
>> [   17.220916] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen
>> [   17.220930] ata2.00: irq_stat 0x00000040, connection status changed
>> [   17.220934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   17.220944] ata2.00: failed command: READ FPDMA QUEUED
>> [   17.220947] ata2.00: cmd 60/10:78:48:a8:04/00:00:0b:00:00/40 tag 15 ncq dma 8192 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   17.220963] ata2.00: status: { DRDY }
>> [   17.220972] ata2: hard resetting link
>> [   18.117578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   18.118584] ata2.00: configured for UDMA/133
>> [   18.128737] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s
>> [   18.128748] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] 
>> [   18.128755] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
>> [   18.128761] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 0b 04 a8 48 00 00 10 00
>> [   18.128765] I/O error, dev sda, sector 184854600 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
>> [   18.128798] ata2: EH complete
>> [   18.298855] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating.
>> [   20.120927] ata2.00: limiting speed to UDMA/100:PIO4
>> [   20.120938] ata2.00: exception Emask 0x10 SAct 0x100 SErr 0x40d0002 action 0xe frozen
>> [   20.120945] ata2.00: irq_stat 0x00000040, connection status changed
>> [   20.120949] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   20.120958] ata2.00: failed command: READ FPDMA QUEUED
>> [   20.120961] ata2.00: cmd 60/08:40:90:f8:87/00:00:04:00:00/40 tag 8 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   20.120976] ata2.00: status: { DRDY }
>> [   20.120987] ata2: hard resetting link
>> [   21.017651] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   21.018696] ata2.00: configured for UDMA/100
>> [   21.028886] ata2: EH complete
>> [   21.494246] ata2.00: exception Emask 0x10 SAct 0x100000 SErr 0x40d0002 action 0xe frozen
>> [   21.494258] ata2.00: irq_stat 0x00000040, connection status changed
>> [   21.494263] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   21.494273] ata2.00: failed command: READ FPDMA QUEUED
>> [   21.494277] ata2.00: cmd 60/00:a0:60:07:49/01:00:02:00:00/40 tag 20 ncq dma 131072 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   21.494292] ata2.00: status: { DRDY }
>> [   21.494300] ata2: hard resetting link
>> [   22.390924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   22.391922] ata2.00: configured for UDMA/100
>> [   22.402072] sd 1:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   22.402083] sd 1:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current] 
>> [   22.402090] sd 1:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
>> [   22.402097] sd 1:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 02 49 07 60 00 01 00 00
>> [   22.402101] I/O error, dev sda, sector 38340448 op 0x0:(READ) flags 0x80700 phys_seg 27 prio class 0
>> [   22.402136] ata2: EH complete
>> [   23.767592] ata2.00: exception Emask 0x10 SAct 0x40040 SErr 0x40d0002 action 0xe frozen
>> [   23.767604] ata2.00: irq_stat 0x00000040, connection status changed
>> [   23.767609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   23.767617] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   23.767621] ata2.00: cmd 61/08:30:e0:36:cf/00:00:01:00:00/40 tag 6 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   23.767636] ata2.00: status: { DRDY }
>> [   23.767643] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   23.767646] ata2.00: cmd 61/08:90:e8:03:40/00:00:02:00:00/40 tag 18 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   23.767660] ata2.00: status: { DRDY }
>> [   23.767668] ata2: hard resetting link
>> [   24.664348] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   24.665434] ata2.00: configured for UDMA/100
>> [   24.675629] ata2: EH complete
>> [   25.267591] ata2.00: exception Emask 0x10 SAct 0xe000 SErr 0x40d0002 action 0xe frozen
>> [   25.267605] ata2.00: irq_stat 0x00000040, connection status changed
>> [   25.267610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   25.267619] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.267623] ata2.00: cmd 60/68:68:a8:a9:50/00:00:05:00:00/40 tag 13 ncq dma 53248 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.267638] ata2.00: status: { DRDY }
>> [   25.267643] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.267647] ata2.00: cmd 60/b0:70:08:ac:50/02:00:05:00:00/40 tag 14 ncq dma 352256 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.267662] ata2.00: status: { DRDY }
>> [   25.267666] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.267670] ata2.00: cmd 60/f0:78:b8:af:50/03:00:05:00:00/40 tag 15 ncq dma 516096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.267683] ata2.00: status: { DRDY }
>> [   25.267691] ata2: hard resetting link
>> [   26.164282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   26.165271] ata2.00: configured for UDMA/100
>> [   26.175428] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   26.175439] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
>> [   26.175446] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
>> [   26.175453] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00
>> [   26.175457] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0
>> [   26.175501] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   26.175508] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] 
>> [   26.175513] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
>> [   26.175519] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00
>> [   26.175522] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0
>> [   26.175547] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   26.175555] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] 
>> [   26.175562] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
>> [   26.175569] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00
>> [   26.175575] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 126 prio class 0
>> [   26.175596] ata2: EH complete
>> [   26.520926] ata2.00: limiting speed to UDMA/33:PIO4
>> [   26.520936] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen
>> [   26.520943] ata2.00: irq_stat 0x00000040, connection status changed
>> [   26.520948] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   26.520957] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   26.520960] ata2.00: cmd 61/20:78:98:78:d0/00:00:06:00:00/40 tag 15 ncq dma 16384 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   26.520976] ata2.00: status: { DRDY }
>> [   26.520984] ata2: hard resetting link
>> [   27.417761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   27.418764] ata2.00: configured for UDMA/33
>> [   27.428954] ata2: EH complete
>> [   32.727577] ata2.00: exception Emask 0x10 SAct 0x800000 SErr 0x40d0002 action 0xe frozen
>> [   32.727589] ata2.00: irq_stat 0x00000040, connection status changed
>> [   32.727594] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   32.727604] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   32.727607] ata2.00: cmd 61/18:b8:c0:78:d0/00:00:06:00:00/40 tag 23 ncq dma 12288 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   32.727622] ata2.00: status: { DRDY }
>> [   32.727631] ata2: hard resetting link
>> [   33.624294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   33.625331] ata2.00: configured for UDMA/33
>> [   33.635482] ata2: EH complete
>> [   38.700920] ata2.00: exception Emask 0x10 SAct 0x1000000 SErr 0x40d0002 action 0xe frozen
>> [   38.700933] ata2.00: irq_stat 0x00000040, connection status changed
>> [   38.700938] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   38.700949] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   38.700952] ata2.00: cmd 61/18:c0:e0:78:d0/00:00:06:00:00/40 tag 24 ncq dma 12288 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   38.700967] ata2.00: status: { DRDY }
>> [   38.700976] ata2: hard resetting link
>> [   39.597747] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   39.598795] ata2.00: configured for UDMA/33
>> [   39.608942] ata2: EH complete
>> [   40.270908] ata2.00: exception Emask 0x10 SAct 0x80000 SErr 0x40d0002 action 0xe frozen
>> [   40.270921] ata2.00: irq_stat 0x00000040, connection status changed
>> [   40.270925] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   40.270935] ata2.00: failed command: READ FPDMA QUEUED
>> [   40.270939] ata2.00: cmd 60/00:98:40:9b:86/01:00:06:00:00/40 tag 19 ncq dma 131072 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   40.270954] ata2.00: status: { DRDY }
>> [   40.270963] ata2: hard resetting link
>> [   41.167649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   41.168644] ata2.00: configured for UDMA/33
>> [   41.178795] sd 1:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   41.178806] sd 1:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current] 
>> [   41.178813] sd 1:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command
>> [   41.178819] sd 1:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 06 86 9b 40 00 01 00 00
>> [   41.178823] I/O error, dev sda, sector 109484864 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
>> [   41.178856] ata2: EH complete
>> [   44.674255] ata2.00: exception Emask 0x10 SAct 0x3 SErr 0x40d0002 action 0xe frozen
>> [   44.674268] ata2.00: irq_stat 0x00000040, connection status changed
>> [   44.674273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   44.674281] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   44.674285] ata2.00: cmd 61/08:00:00:79:d0/00:00:06:00:00/40 tag 0 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   44.674300] ata2.00: status: { DRDY }
>> [   44.674305] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   44.674308] ata2.00: cmd 61/50:08:08:79:d0/00:00:06:00:00/40 tag 1 ncq dma 40960 out
>>                         res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   44.674322] ata2.00: status: { DRDY }
>> [   44.674332] ata2: hard resetting link
>> [   45.570935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   45.571973] ata2.00: configured for UDMA/33
>> [   45.582165] ata2: EH complete
>> [   46.387598] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen
>> [   46.387612] ata2.00: irq_stat 0x00000040, connection status changed
>> [   46.387617] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   46.387626] ata2.00: failed command: READ FPDMA QUEUED
>> [   46.387630] ata2.00: cmd 60/40:68:c0:65:7f/02:00:01:00:00/40 tag 13 ncq dma 294912 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   46.387646] ata2.00: status: { DRDY }
>> [   46.387655] ata2: hard resetting link
>> [   47.284289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   47.285281] ata2.00: configured for UDMA/33
>> [   47.295485] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   47.295497] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
>> [   47.295504] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
>> [   47.295510] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 7f 65 c0 00 02 40 00
>> [   47.295514] I/O error, dev sda, sector 25126336 op 0x0:(READ) flags 0x80700 phys_seg 59 prio class 0
>> [   47.295555] ata2: EH complete
>> [   48.940920] ata2.00: exception Emask 0x10 SAct 0x78000 SErr 0x40d0002 action 0xe frozen
>> [   48.940933] ata2.00: irq_stat 0x00000040, connection status changed
>> [   48.940937] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   48.940947] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   48.940950] ata2.00: cmd 61/f8:78:08:a4:c0/01:00:09:00:00/40 tag 15 ncq dma 258048 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   48.940965] ata2.00: status: { DRDY }
>> [   48.940970] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   48.940973] ata2.00: cmd 61/d8:80:00:f8:c1/01:00:09:00:00/40 tag 16 ncq dma 241664 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   48.940987] ata2.00: status: { DRDY }
>> [   48.940992] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   48.940995] ata2.00: cmd 61/08:88:00:18:a1/00:00:01:00:00/40 tag 17 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   48.941008] ata2.00: status: { DRDY }
>> [   48.941012] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   48.941015] ata2.00: cmd 61/08:90:08:18:a1/00:00:01:00:00/40 tag 18 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   48.941028] ata2.00: status: { DRDY }
>> [   48.941035] ata2: hard resetting link
>> [   49.837603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   49.838650] ata2.00: configured for UDMA/33
>> [   49.848795] ata2: EH complete
>> [   50.860925] ata2.00: exception Emask 0x10 SAct 0xff0000 SErr 0x40d0002 action 0xe frozen
>> [   50.860939] ata2.00: irq_stat 0x00000040, connection status changed
>> [   50.860944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   50.860953] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.860957] ata2.00: cmd 61/08:80:10:f8:07/00:00:00:00:00/40 tag 16 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.860973] ata2.00: status: { DRDY }
>> [   50.860978] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.860981] ata2.00: cmd 61/08:88:48:1b:09/00:00:00:00:00/40 tag 17 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.860995] ata2.00: status: { DRDY }
>> [   50.860999] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861002] ata2.00: cmd 61/08:90:18:1c:09/00:00:00:00:00/40 tag 18 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861015] ata2.00: status: { DRDY }
>> [   50.861020] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861023] ata2.00: cmd 61/08:98:00:f8:c7/00:00:01:00:00/40 tag 19 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861035] ata2.00: status: { DRDY }
>> [   50.861039] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861043] ata2.00: cmd 61/08:a0:80:f8:c7/00:00:01:00:00/40 tag 20 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861055] ata2.00: status: { DRDY }
>> [   50.861059] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861062] ata2.00: cmd 61/08:a8:a0:f9:c7/00:00:01:00:00/40 tag 21 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861075] ata2.00: status: { DRDY }
>> [   50.861079] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861082] ata2.00: cmd 61/08:b0:c8:fd:c7/00:00:01:00:00/40 tag 22 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861094] ata2.00: status: { DRDY }
>> [   50.861098] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   50.861101] ata2.00: cmd 61/08:b8:b8:f9:c8/00:00:01:00:00/40 tag 23 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   50.861114] ata2.00: status: { DRDY }
>> [   50.861121] ata2: hard resetting link
>> [   51.757643] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   51.758674] ata2.00: configured for UDMA/33
>> [   51.768836] ata2: EH complete
>> [    0.000000] Linux version 6.10.0-rc1-1.1-mainline (linux-mainline@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 19:28:34 +0000
>> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
>> [    0.000000] BIOS-provided physical RAM map:
>> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>> [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable
>> [    0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
>> [    0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
>> [    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
>> [    0.000000] NX (Execute Disable) protection: active
>> [    0.000000] APIC: Static calls initialized
>> [    0.000000] SMBIOS 2.4 present.
>> [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017
>> [    0.000000] DMI: Memory slots populated: 2/4
>> [    0.000000] tsc: Fast TSC calibration using PIT
>> [    0.000000] tsc: Detected 3321.904 MHz processor
>> [    0.002898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>> [    0.002902] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [    0.002908] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
>> [    0.002917] total RAM covered: 3070M
>> [    0.003218] Found optimal setting for mtrr clean up
>> [    0.003219]  gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
>> [    0.003224] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs
>> [    0.003226] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>> [    0.004086] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
>> [    0.004096] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
>> [    0.006997] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
>> [    0.007018] Using GB pages for direct mapping
>> [    0.007298] RAMDISK: [mem 0x31cc3000-0x34e58fff]
>> [    0.007401] ACPI: Early table checksum verification disabled
>> [    0.007406] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT   )
>> [    0.007411] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007417] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007423] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>> [    0.007427] ACPI: FACS 0x00000000BFDF0000 000040
>> [    0.007431] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007435] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>> [    0.007438] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007442] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT    GBT   B0 5455312E BG?? 00000101)
>> [    0.007446] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>> [    0.007450] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
>> [    0.007453] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3]
>> [    0.007454] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6]
>> [    0.007456] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f]
>> [    0.007457] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14]
>> [    0.007458] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77]
>> [    0.007459] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb]
>> [    0.007460] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1]
>> [    0.007462] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb]
>> [    0.007463] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473]
>> [    0.007526] No NUMA configuration found
>> [    0.007527] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
>> [    0.007531] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff]
>> [    0.007572] Zone ranges:
>> [    0.007572]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>> [    0.007575]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>> [    0.007576]   Normal   [mem 0x0000000100000000-0x000000043effffff]
>> [    0.007578]   Device   empty
>> [    0.007579] Movable zone start for each node
>> [    0.007580] Early memory node ranges
>> [    0.007581]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>> [    0.007583]   node   0: [mem 0x0000000000100000-0x00000000bfdeffff]
>> [    0.007584]   node   0: [mem 0x0000000100000000-0x000000043effffff]
>> [    0.007587] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
>> [    0.007593] On node 0, zone DMA: 1 pages in unavailable ranges
>> [    0.007635] On node 0, zone DMA: 97 pages in unavailable ranges
>> [    0.055259] On node 0, zone Normal: 528 pages in unavailable ranges
>> [    0.055335] On node 0, zone Normal: 4096 pages in unavailable ranges
>> [    0.055516] ACPI: PM-Timer IO Port: 0x4008
>> [    0.055528] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>> [    0.055530] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>> [    0.055531] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>> [    0.055533] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>> [    0.055534] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>> [    0.055535] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>> [    0.055536] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>> [    0.055537] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>> [    0.055549] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>> [    0.055552] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [    0.055555] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> [    0.055559] ACPI: Using ACPI (MADT) for SMP configuration information
>> [    0.055561] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>> [    0.055570] CPU topo: Max. logical packages:   1
>> [    0.055572] CPU topo: Max. logical dies:       1
>> [    0.055573] CPU topo: Max. dies per package:   1
>> [    0.055578] CPU topo: Max. threads per core:   1
>> [    0.055579] CPU topo: Num. cores per package:     8
>> [    0.055580] CPU topo: Num. threads per package:   8
>> [    0.055580] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
>> [    0.055593] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
>> [    0.055595] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>> [    0.055596] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
>> [    0.055598] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>> [    0.055599] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
>> [    0.055600] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
>> [    0.055601] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
>> [    0.055602] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
>> [    0.055603] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>> [    0.055604] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
>> [    0.055605] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
>> [    0.055608] [mem 0xbff00000-0xdfffffff] available for PCI devices
>> [    0.055609] Booting paravirtualized kernel on bare hardware
>> [    0.055612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>> [    0.061591] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>> [    0.062566] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
>> [    0.062574] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
>> [    0.062578] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
>> [    0.062599] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
>> [    0.062678] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-mainline", will be passed to user space.
>> [    0.065485] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
>> [    0.066928] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
>> [    0.067006] Fallback order for Node 0: 0 
>> [    0.067011] Built 1 zonelists, mobility grouping on.  Total pages: 4189582
>> [    0.067013] Policy zone: Normal
>> [    0.067423] mem auto-init: stack:all(zero), heap alloc:on, heap free:off, mlocked free:off
>> [    0.067430] software IO TLB: area num 8.
>> [    0.153788] Memory: 16301880K/16758328K available (18432K kernel code, 2176K rwdata, 13400K rodata, 3428K init, 3572K bss, 456188K reserved, 0K cma-reserved)
>> [    0.161940] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [    0.162138] ftrace: allocating 50086 entries in 196 pages
>> [    0.173494] ftrace: allocated 196 pages with 3 groups
>> [    0.173657] Dynamic Preempt: full
>> [    0.173885] rcu: Preemptible hierarchical RCU implementation.
>> [    0.173887] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
>> [    0.173888] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
>> [    0.173890] 	Trampoline variant of Tasks RCU enabled.
>> [    0.173890] 	Rude variant of Tasks RCU enabled.
>> [    0.173891] 	Tracing variant of Tasks RCU enabled.
>> [    0.173892] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
>> [    0.173893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>> [    0.173902] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.173905] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.173907] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
>> [    0.179570] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
>> [    0.179784] rcu: srcu_init: Setting srcu_struct sizes based on contention.
>> [    0.179879] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
>> [    0.179956] spurious 8259A interrupt: IRQ7.
>> [    0.179980] Console: colour dummy device 80x25
>> [    0.179984] printk: legacy console [tty0] enabled
>> [    0.180390] ACPI: Core revision 20240322
>> [    0.180614] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
>> [    0.180648] APIC: Switch to symmetric I/O mode setup
>> [    0.181152] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [    0.197302] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe21ff3be8, max_idle_ns: 440795205660 ns
>> [    0.197308] Calibrating delay loop (skipped), value calculated using timer frequency.. 6646.63 BogoMIPS (lpj=11073013)
>> [    0.197338] LVT offset 1 assigned for vector 0xf9
>> [    0.197343] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
>> [    0.197345] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
>> [    0.197350] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>> [    0.197352] Spectre V2 : Mitigation: Retpolines
>> [    0.197353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>> [    0.197355] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>> [    0.197356] Spectre V2 : Enabling Speculation Barrier for firmware calls
>> [    0.197357] RETBleed: Mitigation: untrained return thunk
>> [    0.197359] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
>> [    0.197361] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
>> [    0.197365] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>> [    0.197367] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>> [    0.197368] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>> [    0.197370] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>> [    0.197372] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>> [    0.222663] Freeing SMP alternatives memory: 40K
>> [    0.222669] pid_max: default: 32768 minimum: 301
>> [    0.223427] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
>> [    0.224276] landlock: Up and running.
>> [    0.224279] Yama: becoming mindful.
>> [    0.224286] LSM support for eBPF active
>> [    0.224534] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>> [    0.224574] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>> [    0.230788] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms
>> [    0.230793] APIC delta adjusted to PM-Timer: 1259529 (1506)
>> [    0.230803] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
>> [    0.231213] Performance Events: Fam15h core perfctr, AMD PMU driver.
>> [    0.231219] ... version:                0
>> [    0.231220] ... bit width:              48
>> [    0.231221] ... generic registers:      6
>> [    0.231222] ... value mask:             0000ffffffffffff
>> [    0.231224] ... max period:             00007fffffffffff
>> [    0.231225] ... fixed-purpose events:   0
>> [    0.231226] ... event mask:             000000000000003f
>> [    0.231331] signal: max sigframe size: 1776
>> [    0.231377] rcu: Hierarchical SRCU implementation.
>> [    0.231378] rcu: 	Max phase no-delay instances is 1000.
>> [    0.233728] MCE: In-kernel MCE decoding enabled.
>> [    0.233797] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>> [    0.233938] smp: Bringing up secondary CPUs ...
>> [    0.233972] smpboot: x86: Booting SMP configuration:
>> [    0.233972] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>> [    0.000830] call_irq_handler: 1.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 2.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 3.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 4.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 5.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 6.55 No irq handler for vector
>> [    0.000830] call_irq_handler: 7.55 No irq handler for vector
>> [    0.261635] smp: Brought up 1 node, 8 CPUs
>> [    0.261635] smpboot: Total of 8 processors activated (53171.06 BogoMIPS)
>> [    0.265003] devtmpfs: initialized
>> [    0.265003] x86/mm: Memory block size: 128MB
>> [    0.268551] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
>> [    0.268551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>> [    0.268551] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
>> [    0.268551] pinctrl core: initialized pinctrl subsystem
>> [    0.268551] PM: RTC time: 14:55:24, date: 2024-05-28
>> [    0.268691] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>> [    0.269102] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
>> [    0.269371] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
>> [    0.269670] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
>> [    0.269684] audit: initializing netlink subsys (disabled)
>> [    0.270682] audit: type=2000 audit(1716908123.093:1): state=initialized audit_enabled=0 res=1
>> [    0.270802] thermal_sys: Registered thermal governor 'fair_share'
>> [    0.270804] thermal_sys: Registered thermal governor 'bang_bang'
>> [    0.270805] thermal_sys: Registered thermal governor 'step_wise'
>> [    0.270807] thermal_sys: Registered thermal governor 'user_space'
>> [    0.270808] thermal_sys: Registered thermal governor 'power_allocator'
>> [    0.270818] cpuidle: using governor ladder
>> [    0.270818] cpuidle: using governor menu
>> [    0.270818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> [    0.271055] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
>> [    0.271071] PCI: Using configuration type 1 for base access
>> [    0.271227] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>> [    0.274047] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
>> [    0.274047] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
>> [    0.274047] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>> [    0.274047] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
>> [    0.274068] Demotion targets for Node 0: null
>> [    0.274192] fbcon: Taking over console
>> [    0.274192] ACPI: Added _OSI(Module Device)
>> [    0.274192] ACPI: Added _OSI(Processor Device)
>> [    0.274192] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [    0.274192] ACPI: Added _OSI(Processor Aggregator Device)
>> [    0.278725] ACPI: 2 ACPI AML tables successfully acquired and loaded
>> [    0.278998] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279005] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279028] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279034] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279040] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279046] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279057] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279063] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279069] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279075] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279086] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279092] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279097] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279103] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279114] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279120] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279126] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279131] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279142] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279148] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279153] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279159] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279170] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279176] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279181] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279187] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279198] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279204] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279209] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279215] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279226] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.279231] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279237] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279242] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279254] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438)
>> [    0.279259] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438)
>> [    0.279265] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438)
>> [    0.279270] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438)
>> [    0.284061] ACPI: _OSC evaluation for CPUs failed, trying _PDC
>> [    0.284126] ACPI: Interpreter enabled
>> [    0.284126] ACPI: PM: (supports S0 S3 S4 S5)
>> [    0.284126] ACPI: Using IOAPIC for interrupt routing
>> [    0.284458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>> [    0.284460] PCI: Using E820 reservations for host bridge windows
>> [    0.284609] ACPI: Enabled 5 GPEs in block 00 to 1F
>> [    0.291651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [    0.291658] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
>> [    0.292037] PCI host bridge to bus 0000:00
>> [    0.292039] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>> [    0.292042] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>> [    0.292045] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
>> [    0.292047] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
>> [    0.292050] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [    0.292068] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint
>> [    0.292080] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
>> [    0.292159] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port
>> [    0.292172] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.292176] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.292179] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>> [    0.292185] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.292191] pci 0000:00:02.0: enabling Extended Tags
>> [    0.292219] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>> [    0.292325] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port
>> [    0.292338] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.292342] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>> [    0.292344] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
>> [    0.292349] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.292355] pci 0000:00:04.0: enabling Extended Tags
>> [    0.292382] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>> [    0.292485] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port
>> [    0.292498] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.292502] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.292504] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>> [    0.292509] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.292515] pci 0000:00:06.0: enabling Extended Tags
>> [    0.292542] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>> [    0.292669] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint
>> [    0.292686] pci 0000:00:11.0: BAR 0 [io  0xff00-0xff07]
>> [    0.292696] pci 0000:00:11.0: BAR 1 [io  0xfe00-0xfe03]
>> [    0.292705] pci 0000:00:11.0: BAR 2 [io  0xfd00-0xfd07]
>> [    0.292714] pci 0000:00:11.0: BAR 3 [io  0xfc00-0xfc03]
>> [    0.292723] pci 0000:00:11.0: BAR 4 [io  0xfb00-0xfb0f]
>> [    0.292732] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff]
>> [    0.292754] pci 0000:00:11.0: set SATA to AHCI mode
>> [    0.292864] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.292883] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff]
>> [    0.293014] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.293031] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff]
>> [    0.293175] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
>> [    0.293192] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff]
>> [    0.293270] pci 0000:00:12.2: supports D1 D2
>> [    0.293272] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>> [    0.293362] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.293379] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff]
>> [    0.293512] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.293529] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff]
>> [    0.293665] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
>> [    0.293682] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff]
>> [    0.293760] pci 0000:00:13.2: supports D1 D2
>> [    0.293762] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>> [    0.293857] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
>> [    0.294016] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
>> [    0.294033] pci 0000:00:14.1: BAR 0 [io  0x0000-0x0007]
>> [    0.294042] pci 0000:00:14.1: BAR 1 [io  0x0000-0x0003]
>> [    0.294051] pci 0000:00:14.1: BAR 2 [io  0x0000-0x0007]
>> [    0.294060] pci 0000:00:14.1: BAR 3 [io  0x0000-0x0003]
>> [    0.294069] pci 0000:00:14.1: BAR 4 [io  0xfa00-0xfa0f]
>> [    0.294089] pci 0000:00:14.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
>> [    0.294090] pci 0000:00:14.1: BAR 1 [io  0x03f6]: legacy IDE quirk
>> [    0.294092] pci 0000:00:14.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
>> [    0.294094] pci 0000:00:14.1: BAR 3 [io  0x0376]: legacy IDE quirk
>> [    0.294201] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
>> [    0.294223] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit]
>> [    0.294288] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>> [    0.294373] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
>> [    0.294539] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
>> [    0.294570] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
>> [    0.294576] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>> [    0.294579] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>> [    0.294585] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.294675] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
>> [    0.294692] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff]
>> [    0.294826] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294878] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294926] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint
>> [    0.294974] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint
>> [    0.295027] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint
>> [    0.295084] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint
>> [    0.295186] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint
>> [    0.295200] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
>> [    0.295211] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
>> [    0.295222] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref]
>> [    0.295229] pci 0000:01:00.0: BAR 5 [io  0xef00-0xef7f]
>> [    0.295237] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref]
>> [    0.295267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>> [    0.295352] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
>> [    0.295433] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
>> [    0.295447] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff]
>> [    0.295596] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.295643] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
>> [    0.295658] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit]
>> [    0.295719] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.295791] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.295839] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
>> [    0.295855] pci 0000:03:00.0: BAR 0 [io  0xce00-0xceff]
>> [    0.295875] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit]
>> [    0.295889] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref]
>> [    0.295971] pci 0000:03:00.0: supports D1 D2
>> [    0.295973] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.296102] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.296118] pci_bus 0000:04: extended config space not accessible
>> [    0.296180] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
>> [    0.296190] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>> [    0.296192] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>> [    0.296194] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
>> [    0.296197] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
>> [    0.296492] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
>> [    0.296494] ACPI: PCI: Interrupt link LNKA disabled
>> [    0.296554] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
>> [    0.296556] ACPI: PCI: Interrupt link LNKB disabled
>> [    0.296615] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
>> [    0.296617] ACPI: PCI: Interrupt link LNKC disabled
>> [    0.296675] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
>> [    0.296677] ACPI: PCI: Interrupt link LNKD disabled
>> [    0.296736] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
>> [    0.296738] ACPI: PCI: Interrupt link LNKE disabled
>> [    0.296796] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
>> [    0.296797] ACPI: PCI: Interrupt link LNKF disabled
>> [    0.296855] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
>> [    0.296857] ACPI: PCI: Interrupt link LNK0 disabled
>> [    0.296915] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
>> [    0.296916] ACPI: PCI: Interrupt link LNK1 disabled
>> [    0.297713] iommu: Default domain type: Translated
>> [    0.297713] iommu: DMA domain TLB invalidation policy: lazy mode
>> [    0.297713] SCSI subsystem initialized
>> [    0.297713] libata version 3.00 loaded.
>> [    0.297713] ACPI: bus type USB registered
>> [    0.297713] usbcore: registered new interface driver usbfs
>> [    0.297713] usbcore: registered new interface driver hub
>> [    0.297713] usbcore: registered new device driver usb
>> [    0.297713] EDAC MC: Ver: 3.0.0
>> [    0.297713] NetLabel: Initializing
>> [    0.297713] NetLabel:  domain hash size = 128
>> [    0.297713] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>> [    0.297713] NetLabel:  unlabeled traffic allowed by default
>> [    0.297713] mctp: management component transport protocol core
>> [    0.297713] NET: Registered PF_MCTP protocol family
>> [    0.297713] PCI: Using ACPI for IRQ routing
>> [    0.306985] PCI: pci_cache_line_size set to 64 bytes
>> [    0.307038] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>> [    0.307040] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff]
>> [    0.307042] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
>> [    0.307357] pci 0000:01:00.0: vgaarb: setting as boot VGA device
>> [    0.307357] pci 0000:01:00.0: vgaarb: bridge control possible
>> [    0.307357] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>> [    0.307357] vgaarb: loaded
>> [    0.307357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> [    0.307358] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>> [    0.310643] clocksource: Switched to clocksource tsc-early
>> [    0.310661] VFS: Disk quotas dquot_6.6.0
>> [    0.310661] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [    0.310661] pnp: PnP ACPI init
>> [    0.310661] system 00:00: [io  0x04d0-0x04d1] has been reserved
>> [    0.310661] system 00:00: [io  0x0220-0x0225] has been reserved
>> [    0.310661] system 00:00: [io  0x0290-0x0294] has been reserved
>> [    0.311960] system 00:01: [io  0x4100-0x411f] has been reserved
>> [    0.311967] system 00:01: [io  0x0228-0x022f] has been reserved
>> [    0.311970] system 00:01: [io  0x040b] has been reserved
>> [    0.311972] system 00:01: [io  0x04d6] has been reserved
>> [    0.311974] system 00:01: [io  0x0c00-0x0c01] has been reserved
>> [    0.311976] system 00:01: [io  0x0c14] has been reserved
>> [    0.311978] system 00:01: [io  0x0c50-0x0c52] has been reserved
>> [    0.311980] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
>> [    0.311982] system 00:01: [io  0x0c6f] has been reserved
>> [    0.311984] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
>> [    0.311986] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
>> [    0.311987] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
>> [    0.311989] system 00:01: [io  0x4000-0x40fe] has been reserved
>> [    0.311995] system 00:01: [io  0x4210-0x4217] has been reserved
>> [    0.311997] system 00:01: [io  0x0b00-0x0b0f] has been reserved
>> [    0.311999] system 00:01: [io  0x0b10-0x0b1f] has been reserved
>> [    0.312001] system 00:01: [io  0x0b20-0x0b3f] has been reserved
>> [    0.312003] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved
>> [    0.312006] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
>> [    0.313070] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>> [    0.313313] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
>> [    0.313336] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
>> [    0.313339] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
>> [    0.313341] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
>> [    0.313343] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
>> [    0.313346] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
>> [    0.313348] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
>> [    0.313350] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved
>> [    0.313352] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved
>> [    0.313354] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved
>> [    0.313357] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>> [    0.313359] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
>> [    0.313361] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
>> [    0.313386] pnp: PnP ACPI: found 7 devices
>> [    0.320151] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>> [    0.320423] NET: Registered PF_INET protocol family
>> [    0.320747] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>> [    0.337449] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
>> [    0.337493] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
>> [    0.337664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
>> [    0.338080] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
>> [    0.338397] TCP: Hash tables configured (established 131072 bind 65536)
>> [    0.338622] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
>> [    0.338775] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
>> [    0.338839] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
>> [    0.338937] NET: Registered PF_UNIX/PF_LOCAL protocol family
>> [    0.338952] NET: Registered PF_XDP protocol family
>> [    0.338967] pci 0000:00:02.0: PCI bridge to [bus 01]
>> [    0.338971] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>> [    0.338975] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>> [    0.338978] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.338982] pci 0000:00:04.0: PCI bridge to [bus 02]
>> [    0.338984] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>> [    0.338987] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
>> [    0.338990] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.338994] pci 0000:00:06.0: PCI bridge to [bus 03]
>> [    0.338996] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>> [    0.338999] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
>> [    0.339001] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.339006] pci 0000:00:14.4: PCI bridge to [bus 04]
>> [    0.339008] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>> [    0.339013] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
>> [    0.339017] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.339024] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>> [    0.339027] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>> [    0.339029] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
>> [    0.339031] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
>> [    0.339033] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>> [    0.339034] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
>> [    0.339036] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
>> [    0.339038] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>> [    0.339040] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
>> [    0.339042] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>> [    0.339044] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>> [    0.339045] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
>> [    0.339047] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
>> [    0.339049] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>> [    0.339051] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
>> [    0.339053] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
>> [    0.339055] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
>> [    0.339056] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
>> [    0.339058] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
>> [    0.339060] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
>> [    0.358813] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 19226 usecs
>> [    0.375500] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 16282 usecs
>> [    0.392195] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 16103 usecs
>> [    0.408890] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 16292 usecs
>> [    0.425585] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 16090 usecs
>> [    0.425616] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
>> [    0.425651] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
>> [    0.425850] PCI: CLS 64 bytes, default 64
>> [    0.425871] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [    0.425872] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB)
>> [    0.425913] LVT offset 0 assigned for vector 0x400
>> [    0.425959] Trying to unpack rootfs image as initramfs...
>> [    0.431037] perf: AMD IBS detected (0x000000ff)
>> [    0.432658] Initialise system trusted keyrings
>> [    0.432672] Key type blacklist registered
>> [    0.432730] workingset: timestamp_bits=41 max_order=22 bucket_order=0
>> [    0.432739] zbud: loaded
>> [    0.433154] fuse: init (API version 7.40)
>> [    0.433398] integrity: Platform Keyring initialized
>> [    0.433404] integrity: Machine keyring initialized
>> [    0.448217] Key type asymmetric registered
>> [    0.448219] Asymmetric key parser 'x509' registered
>> [    0.448295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
>> [    0.448363] io scheduler mq-deadline registered
>> [    0.448365] io scheduler kyber registered
>> [    0.448421] io scheduler bfq registered
>> [    0.449310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>> [    0.449428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [    0.449459] ACPI: button: Power Button [PWRB]
>> [    0.449508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [    0.451942] ACPI: button: Power Button [PWRF]
>> [    0.452005] ACPI: \_PR_.C000: Found 2 idle states
>> [    0.452097] ACPI: \_PR_.C001: Found 2 idle states
>> [    0.452173] ACPI: \_PR_.C002: Found 2 idle states
>> [    0.452251] ACPI: \_PR_.C003: Found 2 idle states
>> [    0.452328] ACPI: \_PR_.C004: Found 2 idle states
>> [    0.452412] ACPI: \_PR_.C005: Found 2 idle states
>> [    0.452481] ACPI: \_PR_.C006: Found 2 idle states
>> [    0.452548] ACPI: \_PR_.C007: Found 2 idle states
>> [    0.452838] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>> [    0.453015] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>> [    0.456260] Non-volatile memory driver v1.3
>> [    0.456262] Linux agpgart interface v0.103
>> [    0.456370] ACPI: bus type drm_connector registered
>> [    0.457223] ahci 0000:00:11.0: version 3.0
>> [    0.457443] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
>> [    0.457447] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf)
>> [    0.457450] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>> [    0.458045] scsi host0: ahci
>> [    0.458260] scsi host1: ahci
>> [    0.458401] scsi host2: ahci
>> [    0.458525] scsi host3: ahci
>> [    0.458578] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3
>> [    0.458582] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3
>> [    0.458584] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3
>> [    0.458587] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3
>> [    0.458798] ohci-pci 0000:00:12.0: OHCI PCI host controller
>> [    0.458805] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
>> [    0.458845] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
>> [    0.517654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
>> [    0.517662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.517665] usb usb1: Product: OHCI PCI host controller
>> [    0.517667] usb usb1: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
>> [    0.517669] usb usb1: SerialNumber: 0000:00:12.0
>> [    0.517928] hub 1-0:1.0: USB hub found
>> [    0.517940] hub 1-0:1.0: 3 ports detected
>> [    0.518219] ehci-pci 0000:00:12.2: EHCI Host Controller
>> [    0.518226] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
>> [    0.518231] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [    0.518242] ehci-pci 0000:00:12.2: debug port 1
>> [    0.518296] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
>> [    0.524334] Freeing initrd memory: 50776K
>> [    0.530326] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
>> [    0.530446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
>> [    0.530450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.530452] usb usb2: Product: EHCI Host Controller
>> [    0.530454] usb usb2: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd
>> [    0.530456] usb usb2: SerialNumber: 0000:00:12.2
>> [    0.530609] hub 2-0:1.0: USB hub found
>> [    0.530617] hub 2-0:1.0: 6 ports detected
>> [    0.597196] hub 1-0:1.0: USB hub found
>> [    0.597209] hub 1-0:1.0: 3 ports detected
>> [    0.597341] ehci-pci 0000:00:13.2: EHCI Host Controller
>> [    0.597348] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
>> [    0.597353] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [    0.597364] ehci-pci 0000:00:13.2: debug port 1
>> [    0.597414] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
>> [    0.610458] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
>> [    0.610575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
>> [    0.610578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.610581] usb usb3: Product: EHCI Host Controller
>> [    0.610583] usb usb3: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd
>> [    0.610584] usb usb3: SerialNumber: 0000:00:13.2
>> [    0.610700] hub 3-0:1.0: USB hub found
>> [    0.610708] hub 3-0:1.0: 6 ports detected
>> [    0.610891] ohci-pci 0000:00:12.1: OHCI PCI host controller
>> [    0.610897] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
>> [    0.610926] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
>> [    0.671296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
>> [    0.671300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.671302] usb usb4: Product: OHCI PCI host controller
>> [    0.671304] usb usb4: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
>> [    0.671305] usb usb4: SerialNumber: 0000:00:12.1
>> [    0.671543] hub 4-0:1.0: USB hub found
>> [    0.671554] hub 4-0:1.0: 3 ports detected
>> [    0.671854] ohci-pci 0000:00:13.0: OHCI PCI host controller
>> [    0.671859] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
>> [    0.671895] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
>> [    0.731397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
>> [    0.731401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.731403] usb usb5: Product: OHCI PCI host controller
>> [    0.731404] usb usb5: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
>> [    0.731406] usb usb5: SerialNumber: 0000:00:13.0
>> [    0.731651] hub 5-0:1.0: USB hub found
>> [    0.731670] hub 5-0:1.0: 3 ports detected
>> [    0.731930] ohci-pci 0000:00:13.1: OHCI PCI host controller
>> [    0.731936] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
>> [    0.731955] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
>> [    0.772520] ata4: SATA link down (SStatus 0 SControl 300)
>> [    0.773799] ata1: SATA link down (SStatus 0 SControl 300)
>> [    0.783810] usb 2-1: new high-speed USB device number 2 using ehci-pci
>> [    0.791492] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
>> [    0.791497] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.791499] usb usb6: Product: OHCI PCI host controller
>> [    0.791501] usb usb6: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
>> [    0.791503] usb usb6: SerialNumber: 0000:00:13.1
>> [    0.791683] hub 6-0:1.0: USB hub found
>> [    0.791697] hub 6-0:1.0: 3 ports detected
>> [    0.791966] ohci-pci 0000:00:14.5: OHCI PCI host controller
>> [    0.791972] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
>> [    0.791991] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
>> [    0.851602] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
>> [    0.851606] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    0.851608] usb usb7: Product: OHCI PCI host controller
>> [    0.851610] usb usb7: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd
>> [    0.851611] usb usb7: SerialNumber: 0000:00:14.5
>> [    0.851843] hub 7-0:1.0: USB hub found
>> [    0.851854] hub 7-0:1.0: 2 ports detected
>> [    0.852034] usbcore: registered new interface driver usbserial_generic
>> [    0.852041] usbserial: USB Serial support registered for generic
>> [    0.852130] rtc_cmos 00:02: RTC can wake from S4
>> [    0.852362] rtc_cmos 00:02: registered as rtc0
>> [    0.852387] rtc_cmos 00:02: setting system clock to 2024-05-28T14:55:25 UTC (1716908125)
>> [    0.852420] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
>> [    0.852467] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
>> [    0.852678] ledtrig-cpu: registered to indicate activity on CPUs
>> [    0.853181] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
>> [    0.858086] Console: switching to colour frame buffer device 160x64
>> [    0.861204] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
>> [    0.861268] hid: raw HID events driver (C) Jiri Kosina
>> [    0.861357] drop_monitor: Initializing network drop monitor service
>> [    0.861679] NET: Registered PF_INET6 protocol family
>> [    0.869644] Segment Routing with IPv6
>> [    0.869647] RPL Segment Routing with IPv6
>> [    0.869665] In-situ OAM (IOAM) with IPv6
>> [    0.869704] NET: Registered PF_PACKET protocol family
>> [    0.869756] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
>> [    0.870256] microcode: Current revision: 0x06000852
>> [    0.870258] microcode: Updated early from: 0x06000822
>> [    0.870396] IPI shorthand broadcast: enabled
>> [    0.873069] sched_clock: Marking stable (874176692, -2503248)->(1778689574, -907016130)
>> [    0.873227] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
>> [    0.873326] registered taskstats version 1
>> [    0.873659] Loading compiled-in X.509 certificates
>> [    0.878261] Loaded X.509 cert 'Build time autogenerated kernel key: 06d3346cea79f18ad765f94d96c9d8cc480c5b54'
>> [    0.880699] Demotion targets for Node 0: null
>> [    0.880949] Key type .fscrypt registered
>> [    0.880951] Key type fscrypt-provisioning registered
>> [    0.881482] PM:   Magic number: 8:474:941
>> [    0.885072] RAS: Correctable Errors collector initialized.
>> [    0.899067] clk: Disabling unused clocks
>> [    0.899071] PM: genpd: Disabling unused power domains
>> [    0.935183] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
>> [    0.935188] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [    0.935191] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter
>> [    0.935193] usb 2-1: Manufacturer: Realtek
>> [    0.935194] usb 2-1: SerialNumber: 123456
>> [    0.938653] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    0.938815] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
>> [    0.938845] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
>> [    0.939449] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    0.939469] ata2.00: configured for UDMA/133
>> [    0.940170] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
>> [    0.940398] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
>> [    0.941260] ata3.00: configured for UDMA/133
>> [    0.952301] scsi 1:0:0:0: Direct-Access     ATA      Apacer AS340 120 2PE0 PQ: 0 ANSI: 5
>> [    0.952706] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
>> [    0.952718] sd 1:0:0:0: [sda] Write Protect is off
>> [    0.952720] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    0.952738] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
>> [    0.952745] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [    0.952783] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>> [    0.953078] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>> [    0.953081] sd 2:0:0:0: [sdb] 4096-byte physical blocks
>> [    0.953094] sd 2:0:0:0: [sdb] Write Protect is off
>> [    0.953097] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> [    0.953119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [    0.953155] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
>> [    0.953410]  sda: sda1 sda2
>> [    0.953543] sd 1:0:0:0: [sda] Attached SCSI disk
>> [    0.974223]  sdb: sdb1 sdb2
>> [    0.974515] sd 2:0:0:0: [sdb] Attached SCSI disk
>> [    0.976712] Freeing unused decrypted memory: 2028K
>> [    0.977421] Freeing unused kernel image (initmem) memory: 3428K
>> [    0.977449] Write protecting the kernel read-only data: 32768k
>> [    0.977898] Freeing unused kernel image (rodata/data gap) memory: 936K
>> [    1.021479] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>> [    1.021484] rodata_test: all tests were successful
>> [    1.021489] Run /init as init process
>> [    1.021490]   with arguments:
>> [    1.021492]     /init
>> [    1.021493]   with environment:
>> [    1.021494]     HOME=/
>> [    1.021495]     TERM=linux
>> [    1.021496]     BOOT_IMAGE=/vmlinuz-linux-mainline
>> [    1.195986] scsi host4: pata_atiixp
>> [    1.196167] scsi host5: pata_atiixp
>> [    1.196211] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0
>> [    1.196214] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0
>> [    1.196565] xhci_hcd 0000:02:00.0: xHCI Host Controller
>> [    1.196572] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
>> [    1.196654] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
>> [    1.196822] xhci_hcd 0000:02:00.0: xHCI Host Controller
>> [    1.196827] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
>> [    1.196830] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
>> [    1.196885] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
>> [    1.196888] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    1.196891] usb usb8: Product: xHCI Host Controller
>> [    1.196893] usb usb8: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd
>> [    1.196895] usb usb8: SerialNumber: 0000:02:00.0
>> [    1.197034] hub 8-0:1.0: USB hub found
>> [    1.197044] hub 8-0:1.0: 1 port detected
>> [    1.197210] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
>> [    1.197213] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [    1.197215] usb usb9: Product: xHCI Host Controller
>> [    1.197217] usb usb9: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd
>> [    1.197218] usb usb9: SerialNumber: 0000:02:00.0
>> [    1.197369] hub 9-0:1.0: USB hub found
>> [    1.197379] hub 9-0:1.0: 4 ports detected
>> [    1.267596] usb 1-3: new low-speed USB device number 2 using ohci-pci
>> [    1.440864] usb 8-1: new high-speed USB device number 2 using xhci_hcd
>> [    1.450887] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06
>> [    1.450899] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>> [    1.450905] usb 1-3: Product: USB Keyboard
>> [    1.454180] tsc: Refined TSC clocksource calibration: 3322.064 MHz
>> [    1.454188] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b718c89, max_idle_ns: 440795253369 ns
>> [    1.454219] clocksource: Switched to clocksource tsc
>> [    1.474236] usbcore: registered new interface driver usbhid
>> [    1.474239] usbhid: USB HID core driver
>> [    1.480046] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2
>> [    1.534698] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0
>> [    1.535151] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3
>> [    1.585891] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
>> [    1.585895] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>> [    1.585897] usb 8-1: Product: USB2.0 Hub
>> [    1.586600] hub 8-1:1.0: USB hub found
>> [    1.586788] hub 8-1:1.0: 4 ports detected
>> [    1.590941] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4
>> [    1.591019] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6
>> [    1.591157] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1
>> [    2.087607] usb 4-1: new full-speed USB device number 2 using ohci-pci
>> [    2.124296] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    2.125160] ata2.00: configured for UDMA/133
>> [    2.282382] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00
>> [    2.282394] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [    2.282400] usb 4-1: Product: USB Gaming Mouse
>> [    2.282405] usb 4-1: Manufacturer: RH
>> [    2.289786] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7
>> [    2.344706] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0
>> [    2.352036] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8
>> [    2.352104] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9
>> [    2.407872] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10
>> [    2.407983] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1
>> [    2.411756] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2
>> [    2.950945] ata2.00: exception Emask 0x10 SAct 0x2 SErr 0x40d0002 action 0xe frozen
>> [    2.950958] ata2.00: irq_stat 0x00000040, connection status changed
>> [    2.950962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    2.950970] ata2.00: failed command: READ FPDMA QUEUED
>> [    2.950974] ata2.00: cmd 60/08:08:80:ff:f1/00:00:0d:00:00/40 tag 1 ncq dma 4096 in
>>                         res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
>> [    2.950989] ata2.00: status: { DRDY }
>> [    2.951000] ata2: hard resetting link
>> [    3.847612] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    3.848393] ata2.00: configured for UDMA/133
>> [    3.858578] sd 1:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    3.858590] sd 1:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current] 
>> [    3.858596] sd 1:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
>> [    3.858602] sd 1:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00
>> [    3.858606] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    3.858640] ata2: EH complete
>> [    4.024750] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none.
>> [    4.189513] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
>> [    4.189520] systemd[1]: Detected architecture x86-64.
>> [    4.377855] systemd[1]: bpf-lsm: LSM BPF program attached
>> [    4.445714] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
>> [    4.446994] systemd-fstab-generator[268]: Mount point  is not a valid path, ignoring.
>> [    5.074228] random: crng init done
>> [    5.137593] ata2.00: exception Emask 0x10 SAct 0x6000 SErr 0x40d0002 action 0xe frozen
>> [    5.137605] ata2.00: irq_stat 0x00000040, connection status changed
>> [    5.137610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    5.137619] ata2.00: failed command: READ FPDMA QUEUED
>> [    5.137623] ata2.00: cmd 60/40:68:28:3d:9c/00:00:01:00:00/40 tag 13 ncq dma 32768 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    5.137638] ata2.00: status: { DRDY }
>> [    5.137643] ata2.00: failed command: READ FPDMA QUEUED
>> [    5.137646] ata2.00: cmd 60/08:70:30:04:ad/00:00:01:00:00/40 tag 14 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    5.137660] ata2.00: status: { DRDY }
>> [    5.137669] ata2: hard resetting link
>> [    6.034334] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    6.035116] ata2.00: configured for UDMA/133
>> [    6.045220] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    6.045224] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] 
>> [    6.045227] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command
>> [    6.045229] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00
>> [    6.045231] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
>> [    6.045240] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    6.045242] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] 
>> [    6.045243] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
>> [    6.045245] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00
>> [    6.045246] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    6.045260] ata2: EH complete
>> [    6.061330] zram: Added device: zram0
>> [    6.213738] systemd[1]: Queued start job for default target Graphical Interface.
>> [    6.268916] systemd[1]: Created slice Slice /system/dirmngr.
>> [    6.269281] systemd[1]: Created slice Slice /system/getty.
>> [    6.269601] systemd[1]: Created slice Slice /system/gpg-agent.
>> [    6.269932] systemd[1]: Created slice Slice /system/gpg-agent-browser.
>> [    6.270255] systemd[1]: Created slice Slice /system/gpg-agent-extra.
>> [    6.270601] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
>> [    6.270969] systemd[1]: Created slice Slice /system/keyboxd.
>> [    6.271364] systemd[1]: Created slice Slice /system/modprobe.
>> [    6.271741] systemd[1]: Created slice Slice /system/systemd-fsck.
>> [    6.272139] systemd[1]: Created slice Slice /system/systemd-zram-setup.
>> [    6.272407] systemd[1]: Created slice User and Session Slice.
>> [    6.272473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>> [    6.272519] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>> [    6.272671] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>> [    6.272689] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862...
>> [    6.272696] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA...
>> [    6.272702] systemd[1]: Expecting device /dev/zram0...
>> [    6.272712] systemd[1]: Reached target Local Encrypted Volumes.
>> [    6.272732] systemd[1]: Reached target Local Integrity Protected Volumes.
>> [    6.272760] systemd[1]: Reached target Path Units.
>> [    6.272774] systemd[1]: Reached target Remote File Systems.
>> [    6.272786] systemd[1]: Reached target Slice Units.
>> [    6.272813] systemd[1]: Reached target Local Verity Protected Volumes.
>> [    6.272878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>> [    6.274451] systemd[1]: Listening on LVM2 poll daemon socket.
>> [    6.276124] systemd[1]: Listening on Process Core Dump Socket.
>> [    6.276243] systemd[1]: Listening on Journal Socket (/dev/log).
>> [    6.276352] systemd[1]: Listening on Journal Socket.
>> [    6.276491] systemd[1]: Listening on Network Service Netlink Socket.
>> [    6.276508] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    6.276753] systemd[1]: Listening on udev Control Socket.
>> [    6.276841] systemd[1]: Listening on udev Kernel Socket.
>> [    6.278013] systemd[1]: Mounting Huge Pages File System...
>> [    6.278798] systemd[1]: Mounting POSIX Message Queue File System...
>> [    6.279574] systemd[1]: Mounting Kernel Debug File System...
>> [    6.280259] systemd[1]: Mounting Kernel Trace File System...
>> [    6.281428] systemd[1]: Starting Create List of Static Device Nodes...
>> [    6.282416] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>> [    6.283594] systemd[1]: Starting Load Kernel Module configfs...
>> [    6.285440] systemd[1]: Starting Load Kernel Module dm_mod...
>> [    6.288313] systemd[1]: Starting Load Kernel Module drm...
>> [    6.289657] systemd[1]: Starting Load Kernel Module fuse...
>> [    6.290654] systemd[1]: Starting Load Kernel Module loop...
>> [    6.290721] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
>> [    6.293064] systemd[1]: Starting Journal Service...
>> [    6.296123] systemd[1]: Starting Load Kernel Modules...
>> [    6.297125] systemd[1]: Starting Generate network units from Kernel command line...
>> [    6.297157] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    6.298301] systemd[1]: Starting Remount Root and Kernel File Systems...
>> [    6.298401] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    6.300167] systemd[1]: Starting Coldplug All udev Devices...
>> [    6.302399] systemd[1]: Mounted Huge Pages File System.
>> [    6.302541] systemd[1]: Mounted POSIX Message Queue File System.
>> [    6.302700] systemd[1]: Mounted Kernel Debug File System.
>> [    6.302823] systemd[1]: Mounted Kernel Trace File System.
>> [    6.303130] systemd[1]: Finished Create List of Static Device Nodes.
>> [    6.303558] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>> [    6.303804] systemd[1]: Finished Load Kernel Module configfs.
>> [    6.304234] systemd[1]: modprobe@drm.service: Deactivated successfully.
>> [    6.305011] systemd[1]: Finished Load Kernel Module drm.
>> [    6.305409] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>> [    6.305623] systemd[1]: Finished Load Kernel Module fuse.
>> [    6.306920] systemd[1]: Mounting FUSE Control File System...
>> [    6.310967] systemd[1]: Mounting Kernel Configuration File System...
>> [    6.314384] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
>> [    6.314746] systemd[1]: Finished Generate network units from Kernel command line.
>> [    6.315728] loop: module loaded
>> [    6.315812] device-mapper: uevent: version 1.0.3
>> [    6.315927] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
>> [    6.316131] systemd[1]: Mounted FUSE Control File System.
>> [    6.316526] systemd[1]: modprobe@loop.service: Deactivated successfully.
>> [    6.316727] systemd[1]: Finished Load Kernel Module loop.
>> [    6.317211] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
>> [    6.317462] systemd[1]: Finished Load Kernel Module dm_mod.
>> [    6.318137] systemd[1]: Mounted Kernel Configuration File System.
>> [    6.321272] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
>> [    6.327810] systemd-journald[293]: Collecting audit messages is disabled.
>> [    6.330711] sd 1:0:0:0: Attached scsi generic sg0 type 0
>> [    6.330756] sd 2:0:0:0: Attached scsi generic sg1 type 0
>> [    6.337713] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none.
>> [    6.338469] Asymmetric key parser 'pkcs8' registered
>> [    6.338877] systemd[1]: Finished Remount Root and Kernel File Systems.
>> [    6.339806] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
>> [    6.340815] systemd[1]: Starting Load/Save OS Random Seed...
>> [    6.340851] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>> [    6.341146] systemd[1]: Finished Load Kernel Modules.
>> [    6.342097] systemd[1]: Starting Apply Kernel Variables...
>> [    6.359689] systemd[1]: Finished Apply Kernel Variables.
>> [    6.360781] systemd[1]: Finished Load/Save OS Random Seed.
>> [    6.365885] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
>> [    6.366977] systemd[1]: Starting Create System Users...
>> [    6.373038] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>> [    6.394752] systemd[1]: Finished Create System Users.
>> [    6.395804] systemd[1]: Starting Create Static Device Nodes in /dev...
>> [    6.403417] systemd[1]: Started Journal Service.
>> [    6.426247] systemd-journald[293]: Received client request to flush runtime journal.
>> [    6.436701] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating.
>> [    6.436708] systemd-journald[293]: Rotating system journal.
>> [    6.561450] zram0: detected capacity change from 0 to 8388608
>> [    6.617585] mousedev: PS/2 mouse device common for all mice
>> [    6.624669] parport_pc 00:04: reported by Plug and Play ACPI
>> [    6.624743] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>> [    6.642312] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20240322/utaddress-204)
>> [    6.642324] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>> [    6.642621] acpi_cpufreq: overriding BIOS provided _PSD data
>> [    6.646974] input: PC Speaker as /devices/platform/pcspkr/input/input12
>> [    6.647702] cryptd: max_cpu_qlen set to 1000
>> [    6.662746] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
>> [    6.663343] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
>> [    6.663347] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
>> [    6.680483] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>> [    6.687332] AVX version of gcm_enc/dec engaged.
>> [    6.687380] AES CTR mode by8 optimization enabled
>> [    6.702811] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28
>> [    6.702821] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
>> [    6.708344] r8169 0000:03:00.0 enp3s0: renamed from eth0
>> [    6.729580] ppdev: user-space parallel port driver
>> [    6.758079] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
>> [    6.761064] snd_hda_intel 0000:01:00.1: Disabling MSI
>> [    6.761077] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
>> [    6.794382] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
>> [    6.794484] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
>> [    6.794566] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
>> [    6.794649] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
>> [    6.806832] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>> [    6.806839] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> [    6.806842] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>> [    6.806845] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>> [    6.806847] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
>> [    6.806849] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>> [    6.806851] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
>> [    6.806853] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
>> [    6.806855] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>> [    6.879588] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
>> [    6.879697] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
>> [    6.879804] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
>> [    6.879915] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
>> [    6.879980] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
>> [    6.924297] kvm_amd: TSC scaling supported
>> [    6.924301] kvm_amd: Nested Virtualization enabled
>> [    6.924303] kvm_amd: Nested Paging enabled
>> [    6.924310] kvm_amd: LBR virtualization supported
>> [    7.482049] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none.
>> [    7.574255] ata2: limiting SATA link speed to 1.5 Gbps
>> [    7.574266] ata2.00: exception Emask 0x10 SAct 0x2000000 SErr 0x40d0002 action 0xe frozen
>> [    7.574273] ata2.00: irq_stat 0x00000040, connection status changed
>> [    7.574277] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [    7.574288] ata2.00: failed command: READ FPDMA QUEUED
>> [    7.574292] ata2.00: cmd 60/08:c8:78:9f:ae/00:00:02:00:00/40 tag 25 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [    7.574307] ata2.00: status: { DRDY }
>> [    7.574315] ata2: hard resetting link
>> [    8.471010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [    8.472037] ata2.00: configured for UDMA/133
>> [    8.482188] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [    8.482199] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] 
>> [    8.482205] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
>> [    8.482211] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00
>> [    8.482215] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [    8.482247] ata2: EH complete
>> [    9.485245] NET: Registered PF_ALG protocol family
>> [    9.584213] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>> [    9.774328] r8169 0000:03:00.0 enp3s0: Link is Down
>> [   13.954278] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x40d0002 action 0xe frozen
>> [   13.954291] ata2.00: irq_stat 0x00000040, connection status changed
>> [   13.954296] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   13.954304] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   13.954307] ata2.00: cmd 61/10:00:e8:03:40/00:00:02:00:00/40 tag 0 ncq dma 8192 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   13.954322] ata2.00: status: { DRDY }
>> [   13.954333] ata2: hard resetting link
>> [   14.850920] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   14.851963] ata2.00: configured for UDMA/133
>> [   14.862106] ata2: EH complete
>> [   15.427587] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
>> [   15.427600] ata2.00: irq_stat 0x00000040, connection status changed
>> [   15.427604] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   15.427614] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   15.427618] ata2.00: cmd 61/38:88:d8:63:d1/00:00:06:00:00/40 tag 17 ncq dma 28672 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   15.427633] ata2.00: status: { DRDY }
>> [   15.427643] ata2: hard resetting link
>> [   16.324266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   16.325269] ata2.00: configured for UDMA/133
>> [   16.335415] ata2: EH complete
>> [   16.717613] ata2.00: exception Emask 0x10 SAct 0x7800000f SErr 0x40d0002 action 0xe frozen
>> [   16.717625] ata2.00: irq_stat 0x00000040, connection status changed
>> [   16.717630] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   16.717637] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717641] ata2.00: cmd 61/08:00:c0:83:49/00:00:00:00:00/40 tag 0 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717656] ata2.00: status: { DRDY }
>> [   16.717661] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717664] ata2.00: cmd 61/08:08:d0:83:49/00:00:00:00:00/40 tag 1 ncq dma 4096 out
>>                         res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
>> [   16.717678] ata2.00: status: { DRDY }
>> [   16.717682] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717685] ata2.00: cmd 61/e0:10:e0:83:49/00:00:00:00:00/40 tag 2 ncq dma 114688 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717698] ata2.00: status: { DRDY }
>> [   16.717702] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717705] ata2.00: cmd 61/48:18:c8:84:49/00:00:00:00:00/40 tag 3 ncq dma 36864 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717717] ata2.00: status: { DRDY }
>> [   16.717724] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717727] ata2.00: cmd 61/08:d8:00:68:a0/00:00:0b:00:00/40 tag 27 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717739] ata2.00: status: { DRDY }
>> [   16.717743] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717746] ata2.00: cmd 61/88:e0:10:83:49/00:00:00:00:00/40 tag 28 ncq dma 69632 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717759] ata2.00: status: { DRDY }
>> [   16.717763] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717766] ata2.00: cmd 61/08:e8:a0:83:49/00:00:00:00:00/40 tag 29 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717778] ata2.00: status: { DRDY }
>> [   16.717782] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   16.717785] ata2.00: cmd 61/08:f0:b0:83:49/00:00:00:00:00/40 tag 30 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   16.717797] ata2.00: status: { DRDY }
>> [   16.717803] ata2: hard resetting link
>> [   17.614259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   17.615251] ata2.00: configured for UDMA/133
>> [   17.625418] ata2: EH complete
>> [   20.014269] ata2.00: limiting speed to UDMA/100:PIO4
>> [   20.014279] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
>> [   20.014286] ata2.00: irq_stat 0x00000040, connection status changed
>> [   20.014290] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   20.014299] ata2.00: failed command: READ FPDMA QUEUED
>> [   20.014303] ata2.00: cmd 60/20:88:60:3d:5e/00:00:0b:00:00/40 tag 17 ncq dma 16384 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   20.014318] ata2.00: status: { DRDY }
>> [   20.014327] ata2: hard resetting link
>> [   20.910918] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   20.911959] ata2.00: configured for UDMA/100
>> [   20.922108] sd 1:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   20.922118] sd 1:0:0:0: [sda] tag#17 Sense Key : Illegal Request [current] 
>> [   20.922125] sd 1:0:0:0: [sda] tag#17 Add. Sense: Unaligned write command
>> [   20.922131] sd 1:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 0b 5e 3d 60 00 00 20 00
>> [   20.922135] I/O error, dev sda, sector 190725472 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
>> [   20.922167] ata2: EH complete
>> [   22.487591] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen
>> [   22.487604] ata2.00: irq_stat 0x00000040, connection status changed
>> [   22.487609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   22.487618] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   22.487622] ata2.00: cmd 61/08:68:f0:03:40/00:00:02:00:00/40 tag 13 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   22.487637] ata2.00: status: { DRDY }
>> [   22.487647] ata2: hard resetting link
>> [   23.384251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   23.385285] ata2.00: configured for UDMA/100
>> [   23.395434] ata2: EH complete
>> [   23.576270] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating.
>> [   25.040943] ata2.00: exception Emask 0x10 SAct 0xd8 SErr 0x40d0002 action 0xe frozen
>> [   25.040957] ata2.00: irq_stat 0x00000040, connection status changed
>> [   25.040962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   25.040970] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.040974] ata2.00: cmd 60/08:18:88:f8:87/00:00:04:00:00/40 tag 3 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.040989] ata2.00: status: { DRDY }
>> [   25.040994] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.040997] ata2.00: cmd 60/68:20:a8:a9:50/00:00:05:00:00/40 tag 4 ncq dma 53248 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.041011] ata2.00: status: { DRDY }
>> [   25.041015] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.041018] ata2.00: cmd 60/b0:30:08:ac:50/02:00:05:00:00/40 tag 6 ncq dma 352256 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.041031] ata2.00: status: { DRDY }
>> [   25.041035] ata2.00: failed command: READ FPDMA QUEUED
>> [   25.041038] ata2.00: cmd 60/f0:38:b8:af:50/03:00:05:00:00/40 tag 7 ncq dma 516096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   25.041050] ata2.00: status: { DRDY }
>> [   25.041059] ata2: hard resetting link
>> [   25.907668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   25.908712] ata2.00: configured for UDMA/100
>> [   25.918870] sd 1:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   25.918881] sd 1:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current] 
>> [   25.918888] sd 1:0:0:0: [sda] tag#4 Add. Sense: Unaligned write command
>> [   25.918894] sd 1:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00
>> [   25.918898] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0
>> [   25.918935] sd 1:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   25.918951] sd 1:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current] 
>> [   25.918958] sd 1:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
>> [   25.918965] sd 1:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00
>> [   25.918969] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0
>> [   25.918994] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   25.919001] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
>> [   25.919007] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
>> [   25.919014] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00
>> [   25.919018] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 125 prio class 0
>> [   25.919037] ata2: EH complete
>> [   28.054255] ata2.00: exception Emask 0x10 SAct 0x180 SErr 0x40d0002 action 0xe frozen
>> [   28.054267] ata2.00: irq_stat 0x00000040, connection status changed
>> [   28.054272] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   28.054280] ata2.00: failed command: READ FPDMA QUEUED
>> [   28.054284] ata2.00: cmd 60/f8:38:00:25:88/00:00:04:00:00/40 tag 7 ncq dma 126976 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   28.054299] ata2.00: status: { DRDY }
>> [   28.054304] ata2.00: failed command: READ FPDMA QUEUED
>> [   28.054307] ata2.00: cmd 60/08:40:f8:25:88/00:00:04:00:00/40 tag 8 ncq dma 4096 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   28.054321] ata2.00: status: { DRDY }
>> [   28.054330] ata2: hard resetting link
>> [   28.950942] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   28.951968] ata2.00: configured for UDMA/100
>> [   28.962123] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   28.962133] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
>> [   28.962139] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
>> [   28.962145] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 04 88 25 00 00 00 f8 00
>> [   28.962149] I/O error, dev sda, sector 76031232 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0
>> [   28.962186] ata2: EH complete
>> [   31.660931] ata2.00: limiting speed to UDMA/33:PIO4
>> [   31.660942] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen
>> [   31.660948] ata2.00: irq_stat 0x00000040, connection status changed
>> [   31.660952] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   31.660962] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   31.660965] ata2.00: cmd 61/20:88:f8:68:d1/00:00:06:00:00/40 tag 17 ncq dma 16384 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   31.660980] ata2.00: status: { DRDY }
>> [   31.660989] ata2: hard resetting link
>> [   32.557680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   32.558714] ata2.00: configured for UDMA/33
>> [   32.568903] ata2: EH complete
>> [   33.154256] ata2.00: exception Emask 0x10 SAct 0x38800000 SErr 0x40d0002 action 0xe frozen
>> [   33.154269] ata2.00: irq_stat 0x00000040, connection status changed
>> [   33.154273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   33.154284] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   33.154287] ata2.00: cmd 61/b8:b8:20:be:98/01:00:09:00:00/40 tag 23 ncq dma 225280 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   33.154302] ata2.00: status: { DRDY }
>> [   33.154308] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   33.154311] ata2.00: cmd 61/08:d8:00:28:fc/00:00:0a:00:00/40 tag 27 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   33.154324] ata2.00: status: { DRDY }
>> [   33.154329] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   33.154332] ata2.00: cmd 61/d8:e0:b0:8b:d6/01:00:08:00:00/40 tag 28 ncq dma 241664 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   33.154345] ata2.00: status: { DRDY }
>> [   33.154349] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   33.154352] ata2.00: cmd 61/08:e8:10:78:9b/00:00:04:00:00/40 tag 29 ncq dma 4096 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   33.154364] ata2.00: status: { DRDY }
>> [   33.154371] ata2: hard resetting link
>> [   34.050956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   34.051959] ata2.00: configured for UDMA/33
>> [   34.062160] ata2: EH complete
>> [   37.637589] ata2.00: exception Emask 0x10 SAct 0x10400 SErr 0x40d0002 action 0xe frozen
>> [   37.637602] ata2.00: irq_stat 0x00000040, connection status changed
>> [   37.637606] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   37.637615] ata2.00: failed command: WRITE FPDMA QUEUED
>> [   37.637618] ata2.00: cmd 61/18:50:20:69:d1/00:00:06:00:00/40 tag 10 ncq dma 12288 out
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   37.637633] ata2.00: status: { DRDY }
>> [   37.637639] ata2.00: failed command: READ FPDMA QUEUED
>> [   37.637643] ata2.00: cmd 60/20:80:90:f5:26/00:00:02:00:00/40 tag 16 ncq dma 16384 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   37.637656] ata2.00: status: { DRDY }
>> [   37.637664] ata2: hard resetting link
>> [   38.504247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   38.505282] ata2.00: configured for UDMA/33
>> [   38.515438] sd 1:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   38.515448] sd 1:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current] 
>> [   38.515455] sd 1:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
>> [   38.515461] sd 1:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 02 26 f5 90 00 00 20 00
>> [   38.515464] I/O error, dev sda, sector 36107664 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
>> [   38.515492] ata2: EH complete
>> [   40.834267] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen
>> [   40.834280] ata2.00: irq_stat 0x00000040, connection status changed
>> [   40.834285] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
>> [   40.834295] ata2.00: failed command: READ FPDMA QUEUED
>> [   40.834299] ata2.00: cmd 60/20:a8:f8:3c:35/00:00:02:00:00/40 tag 21 ncq dma 16384 in
>>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
>> [   40.834314] ata2.00: status: { DRDY }
>> [   40.834323] ata2: hard resetting link
>> [   41.730960] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [   41.732007] ata2.00: configured for UDMA/33
>> [   41.742199] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>> [   41.742211] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] 
>> [   41.742218] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command
>> [   41.742224] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 35 3c f8 00 00 20 00
>> [   41.742228] I/O error, dev sda, sector 37043448 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
>> [   41.742263] ata2: EH complete

-- 
Jens Axboe

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Niklas Cassel]

Hello Tim,

On Tue, May 28, 2024 at 01:17:51PM -0600, Jens Axboe wrote:
> (Adding Damien, he's the ATA guy these days - leaving the below intact)
> 
> On 5/28/24 1:15 PM, Thomas Gleixner wrote:
> > Tim!
> > 
> > On Tue, May 28 2024 at 17:43, Tim Teichmann wrote:
> >> On 24/05/27 07:17pm, Thomas Gleixner wrote:
> >> I've just tested the fix you've provided in the previous email.
> >> The exact patches are attached to the ticket in the archlinux bugtracker[0].
> > 
> > Thanks! I will write a proper changelog and ship it.
> > 
> >> The error regarding CPU scheduling disappeared for both kernel verions[0].
> >> However, the ATA bus error still occurs.
> >>
> >> Also, I suppose that the ATA bus error is the same as the previous one,
> >> because the only value that changes in the exception message is SAct.
> >>
> >> This is the message of the ATA error before the patch:
> >>
> >>>> May 23 23:36:49 archlinux kernel: smpboot: x86: Booting SMP configuration:
> >>>> May 23 23:36:49 archlinux kernel: .... node  #0, CPUs:      #2 #4 #6
> >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 2.55 No irq handler for vector
> >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 4.55 No irq handler for vector
> >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 6.55 No irq handler for vector
> >>>>
> >>>> ATA stuff:
> >>>>
> >>>> May 23 23:36:59 archlinux kernel: ata2.00: exception Emask 0x10 SAct 0x1fffe000 SErr 0x40d0002 action 0xe frozen
> >>>
> >>> That's probably just the fallout of the above.
> > 
> > It's in reality not related and I saw some other AHCI fallout fly by.
> > 
> >> And that's the message after the patch:
> >>
> >> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
> >>
> >> The full dmesg outputs are in the attachments.
> > 
> > Cc'ed the AHCI people and left the info around for them.

We recently (kernel v6.9) enabled LPM for all AHCI controllers if:
-The AHCI controller reports that it supports LPM, and
-The drive reports that it supports LPM (DIPM), and
-CONFIG_SATA_MOBILE_LPM_POLICY=3, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD register.

However, there appears to be some drives (usually cheap ones that we've never
heard about) that reports that they support DIPM, but when actually turning
it on, they stop working.

Looking at the dmesg, you seem to have two SATA drives:

> >> [    0.957220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >> [    0.957984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >> [    0.958027] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
> >> [    0.958069] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133


ata3 (TOSHIBA HDWD110) appears to work correctly.

ata2 (Apacer AS340 120GB) results in command timeouts and
"a change in device presence has been detected" being set in PxSERR.DIAG.X.

> >> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
> >> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
> >> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> >> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
> >> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
> >>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> >> [    2.964307] ata2.00: status: { DRDY }
> >> [    2.964318] ata2: hard resetting link


Could you please try the following patch (quirk):

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c449d60d9bb9..24ebcad65b65 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4199,6 +4199,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
                                                ATA_HORKAGE_ZERO_AFTER_TRIM |
                                                ATA_HORKAGE_NOLPM },
 
+       /* Apacer models with LPM issues */
+       { "Apacer AS340*",              NULL,   ATA_HORKAGE_NOLPM },
+
        /* These specific Samsung models/firmware-revs do not handle LPM well */
        { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
        { "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM },



Kind regards,
Niklas

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Tim Teichmann]

[-- Attachment #1.1: Type: text/plain, Size: 5016 bytes --]

Hello Niklas,

On 24/05/28 10:19pm, Niklas Cassel wrote:
> Hello Tim,
> 
> On Tue, May 28, 2024 at 01:17:51PM -0600, Jens Axboe wrote:
> > (Adding Damien, he's the ATA guy these days - leaving the below intact)
> > 
> > On 5/28/24 1:15 PM, Thomas Gleixner wrote:
> > > Tim!
> > > 
> > > On Tue, May 28 2024 at 17:43, Tim Teichmann wrote:
> > >> On 24/05/27 07:17pm, Thomas Gleixner wrote:
> > >> I've just tested the fix you've provided in the previous email.
> > >> The exact patches are attached to the ticket in the archlinux bugtracker[0].
> > > 
> > > Thanks! I will write a proper changelog and ship it.
> > > 
> > >> The error regarding CPU scheduling disappeared for both kernel verions[0].
> > >> However, the ATA bus error still occurs.
> > >>
> > >> Also, I suppose that the ATA bus error is the same as the previous one,
> > >> because the only value that changes in the exception message is SAct.
> > >>
> > >> This is the message of the ATA error before the patch:
> > >>
> > >>>> May 23 23:36:49 archlinux kernel: smpboot: x86: Booting SMP configuration:
> > >>>> May 23 23:36:49 archlinux kernel: .... node  #0, CPUs:      #2 #4 #6
> > >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 2.55 No irq handler for vector
> > >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 4.55 No irq handler for vector
> > >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 6.55 No irq handler for vector
> > >>>>
> > >>>> ATA stuff:
> > >>>>
> > >>>> May 23 23:36:59 archlinux kernel: ata2.00: exception Emask 0x10 SAct 0x1fffe000 SErr 0x40d0002 action 0xe frozen
> > >>>
> > >>> That's probably just the fallout of the above.
> > > 
> > > It's in reality not related and I saw some other AHCI fallout fly by.
> > > 
> > >> And that's the message after the patch:
> > >>
> > >> [    4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen
> > >>
> > >> The full dmesg outputs are in the attachments.
> > > 
> > > Cc'ed the AHCI people and left the info around for them.
> 
> We recently (kernel v6.9) enabled LPM for all AHCI controllers if:
> -The AHCI controller reports that it supports LPM, and
> -The drive reports that it supports LPM (DIPM), and
> -CONFIG_SATA_MOBILE_LPM_POLICY=3, and
> -The port is not defined as external in the per port PxCMD register, and
> -The port is not defined as hotplug capable in the per port PxCMD register.
> 
> However, there appears to be some drives (usually cheap ones that we've never
> heard about) that reports that they support DIPM, but when actually turning
> it on, they stop working.
> 
> Looking at the dmesg, you seem to have two SATA drives:
> 
> > >> [    0.957220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > >> [    0.957984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > >> [    0.958027] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
> > >> [    0.958069] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
> 
> 
> ata3 (TOSHIBA HDWD110) appears to work correctly.
> 
> ata2 (Apacer AS340 120GB) results in command timeouts and
> "a change in device presence has been detected" being set in PxSERR.DIAG.X.
> 
> > >> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
> > >> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
> > >> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> > >> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
> > >> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
> > >>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> > >> [    2.964307] ata2.00: status: { DRDY }
> > >> [    2.964318] ata2: hard resetting link
> 
> 
> Could you please try the following patch (quirk):
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index c449d60d9bb9..24ebcad65b65 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -4199,6 +4199,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
>                                                 ATA_HORKAGE_ZERO_AFTER_TRIM |
>                                                 ATA_HORKAGE_NOLPM },
>  
> +       /* Apacer models with LPM issues */
> +       { "Apacer AS340*",              NULL,   ATA_HORKAGE_NOLPM },
> +
>         /* These specific Samsung models/firmware-revs do not handle LPM well */
>         { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
>         { "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM },
> 
> 
> 
> Kind regards,
> Niklas

I've just tested the patch you've provided [0] and it works without
throwing ATA exceptions.

The full dmesg output is attached below.

Thank you,
Tim

[0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56#note_188819

[-- Attachment #1.2: dmesg_6.9.2-arch1-1.3.log --]
[-- Type: text/plain, Size: 71228 bytes --]

[    0.000000] Linux version 6.9.2-arch1-1.3 (linux@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Tue, 28 May 2024 21:16:00 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3322.009 MHz processor
[    0.002928] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002932] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002938] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[    0.002947] total RAM covered: 3070M
[    0.003245] Found optimal setting for mtrr clean up
[    0.003246]  gran_size: 64K 	chunk_size: 4M 	num_reg: 3  	lose cover RAM: 0G
[    0.003251] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs
[    0.003253] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004118] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
[    0.004128] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
[    0.007039] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf]
[    0.007060] Using GB pages for direct mapping
[    0.007180] RAMDISK: [mem 0x31c9f000-0x34e46fff]
[    0.007303] ACPI: Early table checksum verification disabled
[    0.007308] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT   )
[    0.007312] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.007319] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.007325] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.007330] ACPI: FACS 0x00000000BFDF0000 000040
[    0.007334] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.007338] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.007342] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.007346] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT    GBT   B0 5455312E BG?? 00000101)
[    0.007350] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.007354] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.007358] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3]
[    0.007359] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6]
[    0.007361] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f]
[    0.007362] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14]
[    0.007364] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77]
[    0.007365] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb]
[    0.007366] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1]
[    0.007367] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb]
[    0.007368] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473]
[    0.007432] No NUMA configuration found
[    0.007433] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[    0.007436] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff]
[    0.007477] Zone ranges:
[    0.007478]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007480]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007482]   Normal   [mem 0x0000000100000000-0x000000043effffff]
[    0.007484]   Device   empty
[    0.007485] Movable zone start for each node
[    0.007486] Early memory node ranges
[    0.007487]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007488]   node   0: [mem 0x0000000000100000-0x00000000bfdeffff]
[    0.007490]   node   0: [mem 0x0000000100000000-0x000000043effffff]
[    0.007493] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[    0.007499] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007539] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.055138] On node 0, zone Normal: 528 pages in unavailable ranges
[    0.055214] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.055397] ACPI: PM-Timer IO Port: 0x4008
[    0.055409] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.055411] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.055413] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.055414] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.055415] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.055416] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.055417] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.055418] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.055431] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.055434] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.055436] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.055441] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.055442] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.055452] CPU topo: Max. logical packages:   1
[    0.055453] CPU topo: Max. logical dies:       1
[    0.055454] CPU topo: Max. dies per package:   1
[    0.055459] CPU topo: Max. threads per core:   1
[    0.055460] CPU topo: Num. cores per package:     8
[    0.055461] CPU topo: Num. threads per package:   8
[    0.055462] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.055475] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.055477] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.055478] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.055479] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.055481] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
[    0.055482] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
[    0.055483] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
[    0.055484] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
[    0.055485] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.055487] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.055488] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.055490] [mem 0xbff00000-0xdfffffff] available for PCI devices
[    0.055491] Booting paravirtualized kernel on bare hardware
[    0.055494] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.061413] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.062339] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.062348] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.062351] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
[    0.062373] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
[    0.062455] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.065336] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.066737] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.066821] Fallback order for Node 0: 0 
[    0.066827] Built 1 zonelists, mobility grouping on.  Total pages: 4123960
[    0.066829] Policy zone: Normal
[    0.067262] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.067268] software IO TLB: area num 8.
[    0.153647] Memory: 16301808K/16758328K available (18432K kernel code, 2164K rwdata, 13296K rodata, 3412K init, 3624K bss, 456260K reserved, 0K cma-reserved)
[    0.161802] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.161996] ftrace: allocating 49852 entries in 195 pages
[    0.173225] ftrace: allocated 195 pages with 4 groups
[    0.173386] Dynamic Preempt: full
[    0.173613] rcu: Preemptible hierarchical RCU implementation.
[    0.173614] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.173616] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.173617] 	Trampoline variant of Tasks RCU enabled.
[    0.173618] 	Rude variant of Tasks RCU enabled.
[    0.173619] 	Tracing variant of Tasks RCU enabled.
[    0.173620] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.173621] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.173629] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.173631] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.173633] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.179214] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.179427] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.179520] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.179595] spurious 8259A interrupt: IRQ7.
[    0.179615] Console: colour dummy device 80x25
[    0.179618] printk: legacy console [tty0] enabled
[    0.180017] ACPI: Core revision 20230628
[    0.180243] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.180277] APIC: Switch to symmetric I/O mode setup
[    0.180782] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.196930] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe2839811f, max_idle_ns: 440795276340 ns
[    0.196936] Calibrating delay loop (skipped), value calculated using timer frequency.. 6646.85 BogoMIPS (lpj=11073363)
[    0.196960] LVT offset 1 assigned for vector 0xf9
[    0.196965] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.196967] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.196972] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.196974] Spectre V2 : Mitigation: Retpolines
[    0.196975] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.196976] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.196977] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.196978] RETBleed: Mitigation: untrained return thunk
[    0.196980] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.196982] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.196986] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.196988] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.196989] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.196991] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.196993] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.220801] Freeing SMP alternatives memory: 40K
[    0.220807] pid_max: default: 32768 minimum: 301
[    0.221538] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.222378] landlock: Up and running.
[    0.222380] Yama: becoming mindful.
[    0.222387] LSM support for eBPF active
[    0.222633] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.222673] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.230401] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms
[    0.230407] APIC delta adjusted to PM-Timer: 1257428 (1507)
[    0.230416] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.230808] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.230814] ... version:                0
[    0.230815] ... bit width:              48
[    0.230816] ... generic registers:      6
[    0.230817] ... value mask:             0000ffffffffffff
[    0.230818] ... max period:             00007fffffffffff
[    0.230819] ... fixed-purpose events:   0
[    0.230820] ... event mask:             000000000000003f
[    0.230932] signal: max sigframe size: 1776
[    0.230983] rcu: Hierarchical SRCU implementation.
[    0.230985] rcu: 	Max phase no-delay instances is 1000.
[    0.233293] MCE: In-kernel MCE decoding enabled.
[    0.233373] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.233505] smp: Bringing up secondary CPUs ...
[    0.233600] smpboot: x86: Booting SMP configuration:
[    0.233600] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.000814] __common_interrupt: 1.55 No irq handler for vector
[    0.000814] __common_interrupt: 2.55 No irq handler for vector
[    0.000814] __common_interrupt: 3.55 No irq handler for vector
[    0.000814] __common_interrupt: 4.55 No irq handler for vector
[    0.000814] __common_interrupt: 5.55 No irq handler for vector
[    0.000814] __common_interrupt: 6.55 No irq handler for vector
[    0.000814] __common_interrupt: 7.55 No irq handler for vector
[    0.263642] smp: Brought up 1 node, 8 CPUs
[    0.263647] smpboot: Total of 8 processors activated (53173.81 BogoMIPS)
[    0.270270] devtmpfs: initialized
[    0.270315] x86/mm: Memory block size: 128MB
[    0.272131] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
[    0.272131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.272131] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.272131] pinctrl core: initialized pinctrl subsystem
[    0.272131] PM: RTC time: 12:42:29, date: 2024-05-29
[    0.272188] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.272620] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.272907] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.273800] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.273814] audit: initializing netlink subsys (disabled)
[    0.273827] audit: type=2000 audit(1716986548.096:1): state=initialized audit_enabled=0 res=1
[    0.273827] thermal_sys: Registered thermal governor 'fair_share'
[    0.273827] thermal_sys: Registered thermal governor 'bang_bang'
[    0.273827] thermal_sys: Registered thermal governor 'step_wise'
[    0.273827] thermal_sys: Registered thermal governor 'user_space'
[    0.273827] thermal_sys: Registered thermal governor 'power_allocator'
[    0.273827] cpuidle: using governor ladder
[    0.273827] cpuidle: using governor menu
[    0.273827] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.274016] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.274021] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry
[    0.274034] PCI: Using configuration type 1 for base access
[    0.274129] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.277003] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.277003] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.277003] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.277003] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.277018] Demotion targets for Node 0: null
[    0.277135] fbcon: Taking over console
[    0.277135] ACPI: Added _OSI(Module Device)
[    0.277135] ACPI: Added _OSI(Processor Device)
[    0.277135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.277135] ACPI: Added _OSI(Processor Aggregator Device)
[    0.281946] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.282248] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282255] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282262] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282268] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282281] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282288] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282294] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282300] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282313] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282319] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282325] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282331] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282343] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282349] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282355] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282361] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282374] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282380] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282386] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282392] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282405] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282411] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282417] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282423] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282435] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282441] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282447] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282453] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282465] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282471] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282477] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282482] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282495] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.282501] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282507] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282512] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282525] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438)
[    0.282531] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438)
[    0.282536] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438)
[    0.282542] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438)
[    0.287045] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.287206] ACPI: Interpreter enabled
[    0.287226] ACPI: PM: (supports S0 S3 S4 S5)
[    0.287228] ACPI: Using IOAPIC for interrupt routing
[    0.287550] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.287552] PCI: Using E820 reservations for host bridge windows
[    0.287705] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.294800] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.294808] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.295182] PCI host bridge to bus 0000:00
[    0.295184] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.295187] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.295190] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.295192] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.295195] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.295212] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint
[    0.295224] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[    0.295301] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port
[    0.295314] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.295318] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.295321] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.295327] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.295333] pci 0000:00:02.0: enabling Extended Tags
[    0.295361] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.295467] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port
[    0.295480] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.295484] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.295487] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.295492] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.295498] pci 0000:00:04.0: enabling Extended Tags
[    0.295524] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.295624] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port
[    0.295637] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.295641] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
[    0.295643] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.295649] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.295655] pci 0000:00:06.0: enabling Extended Tags
[    0.295681] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.295804] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint
[    0.295821] pci 0000:00:11.0: BAR 0 [io  0xff00-0xff07]
[    0.295830] pci 0000:00:11.0: BAR 1 [io  0xfe00-0xfe03]
[    0.295840] pci 0000:00:11.0: BAR 2 [io  0xfd00-0xfd07]
[    0.295849] pci 0000:00:11.0: BAR 3 [io  0xfc00-0xfc03]
[    0.295858] pci 0000:00:11.0: BAR 4 [io  0xfb00-0xfb0f]
[    0.295867] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff]
[    0.295889] pci 0000:00:11.0: set SATA to AHCI mode
[    0.295993] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
[    0.296010] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff]
[    0.296140] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
[    0.296157] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff]
[    0.296297] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
[    0.296314] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff]
[    0.296393] pci 0000:00:12.2: supports D1 D2
[    0.296395] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.296483] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint
[    0.296500] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff]
[    0.296627] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint
[    0.296643] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff]
[    0.296776] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint
[    0.296793] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff]
[    0.296872] pci 0000:00:13.2: supports D1 D2
[    0.296874] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.296974] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint
[    0.297129] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint
[    0.297146] pci 0000:00:14.1: BAR 0 [io  0x0000-0x0007]
[    0.297155] pci 0000:00:14.1: BAR 1 [io  0x0000-0x0003]
[    0.297164] pci 0000:00:14.1: BAR 2 [io  0x0000-0x0007]
[    0.297173] pci 0000:00:14.1: BAR 3 [io  0x0000-0x0003]
[    0.297182] pci 0000:00:14.1: BAR 4 [io  0xfa00-0xfa0f]
[    0.297202] pci 0000:00:14.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.297204] pci 0000:00:14.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.297206] pci 0000:00:14.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.297207] pci 0000:00:14.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.297315] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint
[    0.297336] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit]
[    0.297403] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.297482] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint
[    0.297648] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge
[    0.297679] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.297685] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.297689] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.297694] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.297779] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint
[    0.297796] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff]
[    0.297926] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint
[    0.297976] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint
[    0.298023] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint
[    0.298073] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint
[    0.298121] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint
[    0.298170] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint
[    0.298277] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.298291] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff]
[    0.298302] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.298313] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref]
[    0.298320] pci 0000:01:00.0: BAR 5 [io  0xef00-0xef7f]
[    0.298328] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref]
[    0.298355] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.298444] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.298520] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint
[    0.298533] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff]
[    0.298683] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.298724] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
[    0.298739] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit]
[    0.298800] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.298870] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.298918] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.298934] pci 0000:03:00.0: BAR 0 [io  0xce00-0xceff]
[    0.298954] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit]
[    0.298967] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref]
[    0.299049] pci 0000:03:00.0: supports D1 D2
[    0.299051] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.299175] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.299190] pci_bus 0000:04: extended config space not accessible
[    0.299252] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.299261] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.299263] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.299265] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    0.299267] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.299551] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.299553] ACPI: PCI: Interrupt link LNKA disabled
[    0.299609] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.299611] ACPI: PCI: Interrupt link LNKB disabled
[    0.299666] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.299668] ACPI: PCI: Interrupt link LNKC disabled
[    0.299722] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.299723] ACPI: PCI: Interrupt link LNKD disabled
[    0.299777] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.299779] ACPI: PCI: Interrupt link LNKE disabled
[    0.299832] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.299834] ACPI: PCI: Interrupt link LNKF disabled
[    0.299887] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
[    0.299889] ACPI: PCI: Interrupt link LNK0 disabled
[    0.299942] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
[    0.299944] ACPI: PCI: Interrupt link LNK1 disabled
[    0.300718] iommu: Default domain type: Translated
[    0.300718] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.300718] SCSI subsystem initialized
[    0.300718] libata version 3.00 loaded.
[    0.300718] ACPI: bus type USB registered
[    0.300718] usbcore: registered new interface driver usbfs
[    0.300718] usbcore: registered new interface driver hub
[    0.300718] usbcore: registered new device driver usb
[    0.300718] EDAC MC: Ver: 3.0.0
[    0.300718] NetLabel: Initializing
[    0.300718] NetLabel:  domain hash size = 128
[    0.300718] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.300718] NetLabel:  unlabeled traffic allowed by default
[    0.300718] mctp: management component transport protocol core
[    0.300718] NET: Registered PF_MCTP protocol family
[    0.300718] PCI: Using ACPI for IRQ routing
[    0.310072] PCI: pci_cache_line_size set to 64 bytes
[    0.310124] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.310127] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff]
[    0.310128] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[    0.310315] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.310315] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.310315] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.310315] vgaarb: loaded
[    0.310317] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.310317] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.313604] clocksource: Switched to clocksource tsc-early
[    0.313620] VFS: Disk quotas dquot_6.6.0
[    0.313620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.313620] pnp: PnP ACPI init
[    0.313620] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.313620] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.313620] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.314919] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.314927] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.314929] system 00:01: [io  0x040b] has been reserved
[    0.314931] system 00:01: [io  0x04d6] has been reserved
[    0.314934] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.314936] system 00:01: [io  0x0c14] has been reserved
[    0.314938] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.314940] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.314941] system 00:01: [io  0x0c6f] has been reserved
[    0.314943] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.314945] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.314947] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.314949] system 00:01: [io  0x4000-0x40fe] has been reserved
[    0.314951] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.314952] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.314954] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.314956] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.314958] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved
[    0.314961] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.315981] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.316207] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.316230] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.316232] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.316235] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.316237] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
[    0.316239] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.316241] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.316243] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved
[    0.316246] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved
[    0.316248] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved
[    0.316250] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.316252] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.316254] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.316278] pnp: PnP ACPI: found 7 devices
[    0.322952] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.323236] NET: Registered PF_INET protocol family
[    0.323560] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.341101] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.341146] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.341306] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.341785] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.342107] TCP: Hash tables configured (established 131072 bind 65536)
[    0.342329] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.342432] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342495] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342592] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.342609] NET: Registered PF_XDP protocol family
[    0.342625] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.342634] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.342638] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.342641] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.342645] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.342648] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.342651] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.342653] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.342657] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.342659] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
[    0.342662] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.342665] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.342669] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.342672] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.342677] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.342681] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.342688] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.342691] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.342693] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.342695] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.342697] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.342699] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[    0.342701] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.342703] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.342705] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.342707] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.342709] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.342711] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.342713] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.342715] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.342716] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.342718] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[    0.342720] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.342722] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.342724] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.342725] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.361533] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 18301 usecs
[    0.378188] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 16251 usecs
[    0.394839] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 16052 usecs
[    0.411492] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 16252 usecs
[    0.428146] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 16044 usecs
[    0.428177] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.428212] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.428421] PCI: CLS 64 bytes, default 64
[    0.428434] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.428436] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB)
[    0.428477] LVT offset 0 assigned for vector 0x400
[    0.428514] Trying to unpack rootfs image as initramfs...
[    0.433810] perf: AMD IBS detected (0x000000ff)
[    0.435368] Initialise system trusted keyrings
[    0.435382] Key type blacklist registered
[    0.435423] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.435432] zbud: loaded
[    0.435825] fuse: init (API version 7.40)
[    0.436328] integrity: Platform Keyring initialized
[    0.436335] integrity: Machine keyring initialized
[    0.451147] Key type asymmetric registered
[    0.451149] Asymmetric key parser 'x509' registered
[    0.451237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.451317] io scheduler mq-deadline registered
[    0.451320] io scheduler kyber registered
[    0.451386] io scheduler bfq registered
[    0.452277] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.452401] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.452438] ACPI: button: Power Button [PWRB]
[    0.452491] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.455780] ACPI: button: Power Button [PWRF]
[    0.455827] ACPI: \_PR_.C000: Found 2 idle states
[    0.455903] ACPI: \_PR_.C001: Found 2 idle states
[    0.455974] ACPI: \_PR_.C002: Found 2 idle states
[    0.456038] ACPI: \_PR_.C003: Found 2 idle states
[    0.456103] ACPI: \_PR_.C004: Found 2 idle states
[    0.456167] ACPI: \_PR_.C005: Found 2 idle states
[    0.456230] ACPI: \_PR_.C006: Found 2 idle states
[    0.456293] ACPI: \_PR_.C007: Found 2 idle states
[    0.456574] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.456760] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.459791] Non-volatile memory driver v1.3
[    0.459793] Linux agpgart interface v0.103
[    0.459841] ACPI: bus type drm_connector registered
[    0.460708] ahci 0000:00:11.0: version 3.0
[    0.460951] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    0.460955] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf)
[    0.460958] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    0.461546] scsi host0: ahci
[    0.461736] scsi host1: ahci
[    0.461867] scsi host2: ahci
[    0.461987] scsi host3: ahci
[    0.462034] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3
[    0.462037] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3
[    0.462040] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3
[    0.462043] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3
[    0.462257] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    0.462263] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    0.462305] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    0.520463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[    0.520470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.520473] usb usb1: Product: OHCI PCI host controller
[    0.520475] usb usb1: Manufacturer: Linux 6.9.2-arch1-1.3 ohci_hcd
[    0.520477] usb usb1: SerialNumber: 0000:00:12.0
[    0.520657] hub 1-0:1.0: USB hub found
[    0.520669] hub 1-0:1.0: 3 ports detected
[    0.520900] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.520907] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[    0.520912] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.520923] ehci-pci 0000:00:12.2: debug port 1
[    0.520989] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    0.528005] Freeing initrd memory: 50848K
[    0.533015] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.533088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    0.533091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.533094] usb usb2: Product: EHCI Host Controller
[    0.533096] usb usb2: Manufacturer: Linux 6.9.2-arch1-1.3 ehci_hcd
[    0.533097] usb usb2: SerialNumber: 0000:00:12.2
[    0.533252] hub 2-0:1.0: USB hub found
[    0.533261] hub 2-0:1.0: 6 ports detected
[    0.599674] hub 1-0:1.0: USB hub found
[    0.599686] hub 1-0:1.0: 3 ports detected
[    0.599839] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.599845] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[    0.599849] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.599866] ehci-pci 0000:00:13.2: debug port 1
[    0.599919] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    0.612952] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.613009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    0.613013] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.613015] usb usb3: Product: EHCI Host Controller
[    0.613017] usb usb3: Manufacturer: Linux 6.9.2-arch1-1.3 ehci_hcd
[    0.613019] usb usb3: SerialNumber: 0000:00:13.2
[    0.613140] hub 3-0:1.0: USB hub found
[    0.613148] hub 3-0:1.0: 6 ports detected
[    0.613330] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    0.613334] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    0.613352] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    0.673662] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[    0.673667] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.673669] usb usb4: Product: OHCI PCI host controller
[    0.673671] usb usb4: Manufacturer: Linux 6.9.2-arch1-1.3 ohci_hcd
[    0.673673] usb usb4: SerialNumber: 0000:00:12.1
[    0.673843] hub 4-0:1.0: USB hub found
[    0.673854] hub 4-0:1.0: 3 ports detected
[    0.674209] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    0.674217] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.674260] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    0.733607] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[    0.733611] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.733614] usb usb5: Product: OHCI PCI host controller
[    0.733616] usb usb5: Manufacturer: Linux 6.9.2-arch1-1.3 ohci_hcd
[    0.733617] usb usb5: SerialNumber: 0000:00:13.0
[    0.733795] hub 5-0:1.0: USB hub found
[    0.733805] hub 5-0:1.0: 3 ports detected
[    0.734126] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    0.734132] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    0.734155] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    0.777835] ata4: SATA link down (SStatus 0 SControl 300)
[    0.778006] ata1: SATA link down (SStatus 0 SControl 300)
[    0.784485] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.793557] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[    0.793561] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.793563] usb usb6: Product: OHCI PCI host controller
[    0.793565] usb usb6: Manufacturer: Linux 6.9.2-arch1-1.3 ohci_hcd
[    0.793566] usb usb6: SerialNumber: 0000:00:13.1
[    0.793784] hub 6-0:1.0: USB hub found
[    0.793794] hub 6-0:1.0: 3 ports detected
[    0.794124] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    0.794130] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    0.794149] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    0.853510] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[    0.853514] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.853516] usb usb7: Product: OHCI PCI host controller
[    0.853518] usb usb7: Manufacturer: Linux 6.9.2-arch1-1.3 ohci_hcd
[    0.853519] usb usb7: SerialNumber: 0000:00:14.5
[    0.853737] hub 7-0:1.0: USB hub found
[    0.853747] hub 7-0:1.0: 2 ports detected
[    0.853995] usbcore: registered new interface driver usbserial_generic
[    0.854003] usbserial: USB Serial support registered for generic
[    0.854106] rtc_cmos 00:02: RTC can wake from S4
[    0.854346] rtc_cmos 00:02: registered as rtc0
[    0.854374] rtc_cmos 00:02: setting system clock to 2024-05-29T12:42:30 UTC (1716986550)
[    0.854408] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.854453] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.854657] ledtrig-cpu: registered to indicate activity on CPUs
[    0.855141] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.860055] Console: switching to colour frame buffer device 160x64
[    0.863471] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.863541] hid: raw HID events driver (C) Jiri Kosina
[    0.863645] drop_monitor: Initializing network drop monitor service
[    0.863986] NET: Registered PF_INET6 protocol family
[    0.871573] Segment Routing with IPv6
[    0.871576] RPL Segment Routing with IPv6
[    0.871596] In-situ OAM (IOAM) with IPv6
[    0.871637] NET: Registered PF_PACKET protocol family
[    0.871698] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    0.872216] microcode: Current revision: 0x06000852
[    0.872218] microcode: Updated early from: 0x06000822
[    0.872363] IPI shorthand broadcast: enabled
[    0.875084] sched_clock: Marking stable (875210984, -2518685)->(1777722556, -905030257)
[    0.875272] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.875373] registered taskstats version 1
[    0.875705] Loading compiled-in X.509 certificates
[    0.880257] Loaded X.509 cert 'Build time autogenerated kernel key: 792580fa945f304d2a9a419b9cee8195831e651e'
[    0.882915] Key type .fscrypt registered
[    0.882917] Key type fscrypt-provisioning registered
[    0.883423] PM:   Magic number: 8:131:735
[    0.887139] RAS: Correctable Errors collector initialized.
[    0.900662] clk: Disabling unused clocks
[    0.900666] PM: genpd: Disabling unused power domains
[    0.932113] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
[    0.932119] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.932121] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter
[    0.932123] usb 2-1: Manufacturer: Realtek
[    0.932124] usb 2-1: SerialNumber: 123456
[    0.941464] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.942251] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
[    0.942490] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.943452] ata3.00: configured for UDMA/133
[    0.944601] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.944732] ata2.00: LPM support broken, forcing max_power
[    0.944760] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133
[    0.944790] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.945126] ata2.00: LPM support broken, forcing max_power
[    0.945429] ata2.00: configured for UDMA/133
[    0.958193] scsi 1:0:0:0: Direct-Access     ATA      Apacer AS340 120 2PE0 PQ: 0 ANSI: 5
[    0.958598] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.958602] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
[    0.958611] sd 1:0:0:0: [sda] Write Protect is off
[    0.958614] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.958630] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.958661] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    0.958942] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.958945] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    0.958956] sd 2:0:0:0: [sdb] Write Protect is off
[    0.958958] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.958977] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.959011] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    0.959334]  sda: sda1 sda2
[    0.959434] sd 1:0:0:0: [sda] Attached SCSI disk
[    0.985590]  sdb: sdb1 sdb2
[    0.985834] sd 2:0:0:0: [sdb] Attached SCSI disk
[    0.987971] Freeing unused decrypted memory: 2028K
[    0.988653] Freeing unused kernel image (initmem) memory: 3412K
[    0.988657] Write protecting the kernel read-only data: 32768k
[    0.989141] Freeing unused kernel image (rodata/data gap) memory: 1040K
[    1.032417] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.032421] rodata_test: all tests were successful
[    1.032425] Run /init as init process
[    1.032427]   with arguments:
[    1.032428]     /init
[    1.032429]   with environment:
[    1.032430]     HOME=/
[    1.032431]     TERM=linux
[    1.032432]     BOOT_IMAGE=/vmlinuz-linux
[    1.200858] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.200869] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    1.200961] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
[    1.201144] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.201149] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    1.201153] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[    1.201247] scsi host4: pata_atiixp
[    1.201335] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[    1.201339] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.201342] usb usb8: Product: xHCI Host Controller
[    1.201358] usb usb8: Manufacturer: Linux 6.9.2-arch1-1.3 xhci-hcd
[    1.201361] usb usb8: SerialNumber: 0000:02:00.0
[    1.201406] scsi host5: pata_atiixp
[    1.201452] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0
[    1.201455] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0
[    1.201679] hub 8-0:1.0: USB hub found
[    1.201691] hub 8-0:1.0: 1 port detected
[    1.201851] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[    1.201856] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.201859] usb usb9: Product: xHCI Host Controller
[    1.201861] usb usb9: Manufacturer: Linux 6.9.2-arch1-1.3 xhci-hcd
[    1.201863] usb usb9: SerialNumber: 0000:02:00.0
[    1.202220] hub 9-0:1.0: USB hub found
[    1.202234] hub 9-0:1.0: 4 ports detected
[    1.267571] usb 1-3: new low-speed USB device number 2 using ohci-pci
[    1.454222] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[    1.457506] tsc: Refined TSC clocksource calibration: 3322.063 MHz
[    1.457523] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b689782, max_idle_ns: 440795272807 ns
[    1.457602] clocksource: Switched to clocksource tsc
[    1.457630] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06
[    1.457636] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.457639] usb 1-3: Product: USB Keyboard
[    1.481139] usbcore: registered new interface driver usbhid
[    1.481142] usbhid: USB HID core driver
[    1.486931] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2
[    1.541271] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0
[    1.541717] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3
[    1.595598] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    1.595602] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.595604] usb 8-1: Product: USB2.0 Hub
[    1.596308] hub 8-1:1.0: USB hub found
[    1.596496] hub 8-1:1.0: 4 ports detected
[    1.597725] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4
[    1.597805] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6
[    1.597946] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1
[    2.087564] usb 4-1: new full-speed USB device number 2 using ohci-pci
[    2.282353] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00
[    2.282365] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.282370] usb 4-1: Product: USB Gaming Mouse
[    2.282375] usb 4-1: Manufacturer: RH
[    2.289761] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7
[    2.344621] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0
[    2.352021] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8
[    2.352086] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9
[    2.407892] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10
[    2.408041] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1
[    2.411712] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2
[    3.035241] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none.
[    3.204415] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.204423] systemd[1]: Detected architecture x86-64.
[    3.704252] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.755371] systemd-fstab-generator[269]: Mount point  is not a valid path, ignoring.
[    3.755953] systemd-fstab-generator[269]: Mount point  is not a valid path, ignoring.
[    4.457554] random: crng init done
[    4.472946] zram: Added device: zram0
[    4.637985] systemd[1]: Queued start job for default target Graphical Interface.
[    4.678959] systemd[1]: Created slice Slice /system/dirmngr.
[    4.679369] systemd[1]: Created slice Slice /system/getty.
[    4.679736] systemd[1]: Created slice Slice /system/gpg-agent.
[    4.680110] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    4.680482] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    4.680878] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    4.681254] systemd[1]: Created slice Slice /system/keyboxd.
[    4.681618] systemd[1]: Created slice Slice /system/modprobe.
[    4.681937] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.682266] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    4.682496] systemd[1]: Created slice User and Session Slice.
[    4.682557] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.682603] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.682749] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.682768] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862...
[    4.682776] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA...
[    4.682783] systemd[1]: Expecting device /dev/zram0...
[    4.682795] systemd[1]: Reached target Local Encrypted Volumes.
[    4.682813] systemd[1]: Reached target Local Integrity Protected Volumes.
[    4.682837] systemd[1]: Reached target Path Units.
[    4.682851] systemd[1]: Reached target Remote File Systems.
[    4.682861] systemd[1]: Reached target Slice Units.
[    4.682890] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.682963] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.683296] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.684820] systemd[1]: Listening on Process Core Dump Socket.
[    4.684936] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.685041] systemd[1]: Listening on Journal Socket.
[    4.685173] systemd[1]: Listening on Network Service Netlink Socket.
[    4.685190] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.685489] systemd[1]: Listening on udev Control Socket.
[    4.685574] systemd[1]: Listening on udev Kernel Socket.
[    4.687027] systemd[1]: Mounting Huge Pages File System...
[    4.687760] systemd[1]: Mounting POSIX Message Queue File System...
[    4.688524] systemd[1]: Mounting Kernel Debug File System...
[    4.689247] systemd[1]: Mounting Kernel Trace File System...
[    4.690393] systemd[1]: Starting Create List of Static Device Nodes...
[    4.691389] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.692560] systemd[1]: Starting Load Kernel Module configfs...
[    4.694984] systemd[1]: Starting Load Kernel Module dm_mod...
[    4.697704] systemd[1]: Starting Load Kernel Module drm...
[    4.698928] systemd[1]: Starting Load Kernel Module fuse...
[    4.699880] systemd[1]: Starting Load Kernel Module loop...
[    4.699948] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    4.702243] systemd[1]: Starting Journal Service...
[    4.705201] systemd[1]: Starting Load Kernel Modules...
[    4.706206] systemd[1]: Starting Generate network units from Kernel command line...
[    4.706241] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.707349] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.707431] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.709289] systemd[1]: Starting Coldplug All udev Devices...
[    4.711777] systemd[1]: Mounted Huge Pages File System.
[    4.711955] systemd[1]: Mounted POSIX Message Queue File System.
[    4.712065] systemd[1]: Mounted Kernel Debug File System.
[    4.712184] systemd[1]: Mounted Kernel Trace File System.
[    4.712458] systemd[1]: Finished Create List of Static Device Nodes.
[    4.712869] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.713131] systemd[1]: Finished Load Kernel Module configfs.
[    4.713552] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.713739] systemd[1]: Finished Load Kernel Module drm.
[    4.714168] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.714388] systemd[1]: Finished Load Kernel Module fuse.
[    4.715895] systemd[1]: Mounting FUSE Control File System...
[    4.719435] systemd[1]: Mounting Kernel Configuration File System...
[    4.722528] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    4.722962] systemd[1]: Finished Generate network units from Kernel command line.
[    4.726581] loop: module loaded
[    4.726666] device-mapper: uevent: version 1.0.3
[    4.726785] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    4.727625] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    4.727806] systemd[1]: Finished Load Kernel Module dm_mod.
[    4.728143] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    4.728294] systemd[1]: Finished Load Kernel Module loop.
[    4.728436] systemd[1]: Mounted FUSE Control File System.
[    4.728536] systemd[1]: Mounted Kernel Configuration File System.
[    4.730091] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    4.737696] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none.
[    4.738458] systemd-journald[293]: Collecting audit messages is disabled.
[    4.738774] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.739317] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    4.739357] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.740284] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[    4.741389] systemd[1]: Starting Load/Save OS Random Seed...
[    4.741419] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.747471] Asymmetric key parser 'pkcs8' registered
[    4.748531] systemd[1]: Finished Load Kernel Modules.
[    4.749793] systemd[1]: Starting Apply Kernel Variables...
[    4.762719] systemd[1]: Finished Load/Save OS Random Seed.
[    4.766178] systemd[1]: Finished Apply Kernel Variables.
[    4.775775] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[    4.776951] systemd[1]: Starting Create System Users...
[    4.799839] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    4.804706] systemd[1]: Started Journal Service.
[    4.816414] systemd-journald[293]: Received client request to flush runtime journal.
[    4.824979] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating.
[    4.824986] systemd-journald[293]: Rotating system journal.
[    4.984536] zram0: detected capacity change from 0 to 8388608
[    5.028103] mousedev: PS/2 mouse device common for all mice
[    5.029341] parport_pc 00:04: reported by Plug and Play ACPI
[    5.029425] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    5.049222] cryptd: max_cpu_qlen set to 1000
[    5.050369] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20230628/utaddress-204)
[    5.050382] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    5.051092] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.051936] input: PC Speaker as /devices/platform/pcspkr/input/input12
[    5.067613] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.067731] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
[    5.067735] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
[    5.080852] AVX version of gcm_enc/dec engaged.
[    5.083989] AES CTR mode by8 optimization enabled
[    5.090062] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.105231] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28
[    5.105238] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.109703] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    5.134683] ppdev: user-space parallel port driver
[    5.162871] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.162884] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.171548] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
[    5.214513] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[    5.214589] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[    5.214658] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[    5.214726] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[    5.308685] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.308693] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.308696] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.308698] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.308700] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    5.308702] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.308704] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.308706] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.308708] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.326722] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    5.326807] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[    5.326871] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[    5.329070] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[    5.329531] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[    5.340116] kvm_amd: TSC scaling supported
[    5.340120] kvm_amd: Nested Virtualization enabled
[    5.340121] kvm_amd: Nested Paging enabled
[    5.340128] kvm_amd: LBR virtualization supported
[    5.894238] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none.
[    6.784621] NET: Registered PF_ALG protocol family
[    6.847510] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    7.037662] r8169 0000:03:00.0 enp3s0: Link is Down
[   12.862299] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Niklas Cassel]

On Wed, May 29, 2024 at 03:02:45PM +0200, Tim Teichmann wrote:
> Hello Niklas,
> 
> > ata3 (TOSHIBA HDWD110) appears to work correctly.
> > 
> > ata2 (Apacer AS340 120GB) results in command timeouts and
> > "a change in device presence has been detected" being set in PxSERR.DIAG.X.
> > 
> > > >> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
> > > >> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
> > > >> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> > > >> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
> > > >> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
> > > >>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> > > >> [    2.964307] ata2.00: status: { DRDY }
> > > >> [    2.964318] ata2: hard resetting link
> > 
> > 
> > Could you please try the following patch (quirk):
> > 
> > diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> > index c449d60d9bb9..24ebcad65b65 100644
> > --- a/drivers/ata/libata-core.c
> > +++ b/drivers/ata/libata-core.c
> > @@ -4199,6 +4199,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
> >                                                 ATA_HORKAGE_ZERO_AFTER_TRIM |
> >                                                 ATA_HORKAGE_NOLPM },
> >  
> > +       /* Apacer models with LPM issues */
> > +       { "Apacer AS340*",              NULL,   ATA_HORKAGE_NOLPM },
> > +
> >         /* These specific Samsung models/firmware-revs do not handle LPM well */
> >         { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
> >         { "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM },
> > 
> > 
> > 
> > Kind regards,
> > Niklas
> 
> I've just tested the patch you've provided [0] and it works without
> throwing ATA exceptions.
> 
> The full dmesg output is attached below.
> 

Thank you Tim.


I intend to send out a real patch for this,
but before I do could you please run:

$ hdparm -I /dev/sdX

against both your SATA drives and paste the output.

(I just want to make sure that the device actually advertizes
some kind of power management support.)


Kind regards,
Niklas

Re: [REGRESSION][BISECTED] Scheduling errors with the AMD FX 8300 CPU

[Tim Teichmann]

[-- Attachment #1: Type: text/plain, Size: 9389 bytes --]

Hey Niklas,

On 24/05/29 08:33pm, Niklas Cassel wrote:
> On Wed, May 29, 2024 at 03:02:45PM +0200, Tim Teichmann wrote:
> > Hello Niklas,
> > 
> > > ata3 (TOSHIBA HDWD110) appears to work correctly.
> > > 
> > > ata2 (Apacer AS340 120GB) results in command timeouts and
> > > "a change in device presence has been detected" being set in PxSERR.DIAG.X.
> > > 
> > > > >> [    2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen
> > > > >> [    2.964274] ata2.00: irq_stat 0x00000040, connection status changed
> > > > >> [    2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
> > > > >> [    2.964288] ata2.00: failed command: READ FPDMA QUEUED
> > > > >> [    2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in
> > > > >>                         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
> > > > >> [    2.964307] ata2.00: status: { DRDY }
> > > > >> [    2.964318] ata2: hard resetting link
> > > 
> > > 
> > > Could you please try the following patch (quirk):
> > > 
> > > diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> > > index c449d60d9bb9..24ebcad65b65 100644
> > > --- a/drivers/ata/libata-core.c
> > > +++ b/drivers/ata/libata-core.c
> > > @@ -4199,6 +4199,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
> > >                                                 ATA_HORKAGE_ZERO_AFTER_TRIM |
> > >                                                 ATA_HORKAGE_NOLPM },
> > >  
> > > +       /* Apacer models with LPM issues */
> > > +       { "Apacer AS340*",              NULL,   ATA_HORKAGE_NOLPM },
> > > +
> > >         /* These specific Samsung models/firmware-revs do not handle LPM well */
> > >         { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
> > >         { "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM },
> > > 
> > > 
> > > 
> > > Kind regards,
> > > Niklas
> > 
> > I've just tested the patch you've provided [0] and it works without
> > throwing ATA exceptions.
> > 
> > The full dmesg output is attached below.
> > 
> 
> Thank you Tim.
> 
> 
> I intend to send out a real patch for this,
> but before I do could you please run:
> 
> $ hdparm -I /dev/sdX
> 
> against both your SATA drives and paste the output.
> 
> (I just want to make sure that the device actually advertizes
> some kind of power management support.)
> 
> 
> Kind regards,
> Niklas

this is the output for both of my SATA drives (of course using the same
kernel version I've used in the previous reply [0]):


/dev/sda:

ATA device, with non-removable media
	Model Number:       Apacer AS340 120GB                      
	Serial Number:      270E0788096C03674465
	Firmware Revision:  AP612PE0
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
	Supported: 11 10 9 8 7 6 5 
	Likely used: 11
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:    16514064
	LBA    user addressable sectors:   234441648
	LBA48  user addressable sectors:   234441648
	Logical  Sector size:                   512 bytes
	Physical Sector size:                   512 bytes
	Logical Sector-0 offset:                  0 bytes
	device size with M = 1024*1024:      114473 MBytes
	device size with M = 1000*1000:      120034 MBytes (120 GB)
	cache/buffer size  = unknown
	Form Factor: 2.5 inch
	Nominal Media Rotation Rate: Solid State Device
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 16
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	    Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	    Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   	SMART feature set
	   	Security Mode feature set
	  *	Power Management feature set
	  *	Write cache
	  *	Look-ahead
	  *	Host Protected Area feature set
	  *	WRITE_BUFFER command
	  *	READ_BUFFER command
	  *	NOP cmd
	  *	DOWNLOAD_MICROCODE
	   	SET_MAX security extension
	  *	48-bit Address feature set
	  *	Device Configuration Overlay feature set
	  *	Mandatory FLUSH_CACHE
	  *	FLUSH_CACHE_EXT
	  *	SMART error logging
	  *	SMART self-test
	  *	General Purpose Logging feature set
	  *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	  *	64-bit World wide name
	  *	WRITE_UNCORRECTABLE_EXT command
	  *	{READ,WRITE}_DMA_EXT_GPL commands
	  *	Segmented DOWNLOAD_MICROCODE
	  *	Gen1 signaling speed (1.5Gb/s)
	  *	Gen2 signaling speed (3.0Gb/s)
	  *	Gen3 signaling speed (6.0Gb/s)
	  *	Native Command Queueing (NCQ)
	  *	Phy event counters
	  *	READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
	  *	DMA Setup Auto-Activate optimization
	   	Device-initiated interface power management
	  *	Software settings preservation
	  *	DOWNLOAD MICROCODE DMA command
	  *	SET MAX SETPASSWORD/UNLOCK DMA commands
	  *	WRITE BUFFER DMA command
	  *	READ BUFFER DMA command
	  *	DEVICE CONFIGURATION SET/IDENTIFY DMA commands
	  *	Data Set Management TRIM supported (limit 8 blocks)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
		supported: enhanced erase
	20min for SECURITY ERASE UNIT. 60min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 0000000000000000
	NAA		: 0
	IEEE OUI	: 000000
	Unique ID	: 000000000
Checksum: correct


/dev/sdb:

ATA device, with non-removable media
	Model Number:       TOSHIBA HDWD110                         
	Serial Number:      48L9BJMFS
	Firmware Revision:  MS2OA8J0
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
	Used: unknown (minor revision code 0x0029) 
	Supported: 8 7 6 5 
	Likely used: 8
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:    16514064
	LBA    user addressable sectors:   268435455
	LBA48  user addressable sectors:  1953525168
	Logical  Sector size:                   512 bytes
	Physical Sector size:                  4096 bytes
	Logical Sector-0 offset:                  0 bytes
	device size with M = 1024*1024:      953869 MBytes
	device size with M = 1000*1000:     1000204 MBytes (1000 GB)
	cache/buffer size  = unknown
	Form Factor: 3.5 inch
	Nominal Media Rotation Rate: 7200
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 16
	Advanced power management level: disabled
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	    Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	    Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   	SMART feature set
	   	Security Mode feature set
	  *	Power Management feature set
	  *	Write cache
	  *	Look-ahead
	  *	Host Protected Area feature set
	  *	WRITE_BUFFER command
	  *	READ_BUFFER command
	  *	NOP cmd
	  *	DOWNLOAD_MICROCODE
	   	Advanced Power Management feature set
	   	Power-Up In Standby feature set
	  *	SET_FEATURES required to spinup after power up
	   	SET_MAX security extension
	  *	48-bit Address feature set
	  *	Device Configuration Overlay feature set
	  *	Mandatory FLUSH_CACHE
	  *	FLUSH_CACHE_EXT
	  *	SMART error logging
	  *	SMART self-test
	   	Media Card Pass-Through
	  *	General Purpose Logging feature set
	  *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	  *	64-bit World wide name
	  *	URG for READ_STREAM[_DMA]_EXT
	  *	URG for WRITE_STREAM[_DMA]_EXT
	  *	WRITE_UNCORRECTABLE_EXT command
	  *	{READ,WRITE}_DMA_EXT_GPL commands
	  *	Segmented DOWNLOAD_MICROCODE
	  *	unknown 119[7]
	  *	Gen1 signaling speed (1.5Gb/s)
	  *	Gen2 signaling speed (3.0Gb/s)
	  *	Gen3 signaling speed (6.0Gb/s)
	  *	Native Command Queueing (NCQ)
	  *	Host-initiated interface power management
	  *	Phy event counters
	  *	NCQ priority information
	   	Non-Zero buffer offsets in DMA Setup FIS
	  *	DMA Setup Auto-Activate optimization
	  *	Device-initiated interface power management
	   	In-order data delivery
	  *	Software settings preservation
	  *	SMART Command Transport (SCT) feature set
	  *	SCT Write Same (AC2)
	  *	SCT Error Recovery Control (AC3)
	  *	SCT Features Control (AC4)
	  *	SCT Data Tables (AC5)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
	not	supported: enhanced erase
	160min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000039fd6d25a26
	NAA		: 5
	IEEE OUI	: 000039
	Unique ID	: fd6d25a26
Checksum: correct

For my untrained eyes, it looks like both drives advertise power
management support.

Thank you,
Tim

[0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56#note_188819

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]