linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Niklas Cassel <cassel@kernel.org>
To: Damien Le Moal <dlemoal@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH 04/10] ata: libata-eh: Avoid unnecessary resets when revalidating devices
Date: Mon, 30 Jun 2025 16:47:51 +0200	[thread overview]
Message-ID: <aGKjl4PtYfaFikfY@ryzen> (raw)
In-Reply-To: <20250630062637.258329-5-dlemoal@kernel.org>

On Mon, Jun 30, 2025 at 03:26:31PM +0900, Damien Le Moal wrote:
> In ata_eh_revalidate_and_attach(), a link LPM policy is always
> set to ATA_LPM_MAX_POWER before calling ata_dev_revalidate() to ensure
> that the call to ata_phys_link_offline() does not return true, thus
> causing an unnecessary device reset. This change was introduced
> with commit 71d7b6e51ad3 ("ata: libata-eh: avoid needless hard reset
> when revalidating link").
> 
> However, setting the link LPM policy to ATA_LPM_MAX_POWER may be
> visible only after some time, depending on the power state the link was
> in. E.g. transitioning out of the Partial state should take no longer
> than a few microseconds, but transitioning out of the Slumber or
> DevSleep state may take several milliseconds. So despite the changes
> introduced with commit 71d7b6e51ad3 ("ata: libata-eh: avoid needless
> hard reset when revalidating link"), we can still endup with
> ata_phys_link_offline() seeing a link SCR_STATUS register signaling that
> the device is present (DET is equal to 1h) but that the link PHY is
> still in a low power mode (e.g. IPM is 2h, signaling "Interface in
> Partial power management state"). In such cases, ata_phys_link_offline()
> returns true, causing an EIO return for ata_eh_revalidate_and_attach()
> and a device reset.
> 
> Avoid such unnecessary device resets by introducing a relaxed version
> of the link offline test implemented by ata_phys_link_offline() with
> the new helper function ata_eh_link_established(). This functions
> returns true if for the link SCR_STATUS register we see that:
>  - A device is still present, that is, the DET field is 1h (Device
>    presence detected but Phy communication not established) or 3h
>    (Device presence detected and Phy communication established).
>  - Communication is established, that is, the IPM field is not 0h,
>    indicating that the PHY is online or in a low power state.
> 
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Reviewed-by: Niklas Cassel <cassel@kernel.org>

  reply	other threads:[~2025-06-30 14:47 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-30  6:26 [PATCH 00/10] Improve link power management Damien Le Moal
2025-06-30  6:26 ` [PATCH 01/10] ata: libata-core: Introduce ata_dev_config_lpm() Damien Le Moal
2025-06-30 14:46   ` Niklas Cassel
2025-07-01  6:09   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 02/10] ata: libata-core: Move device LPM quirk settings to ata_dev_config_lpm() Damien Le Moal
2025-06-30 14:47   ` Niklas Cassel
2025-07-01  6:13   ` Hannes Reinecke
2025-07-01  6:43     ` Damien Le Moal
2025-07-01  7:19       ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 03/10] ata: libata-core: Advertize device support for DIPM and HIPM features Damien Le Moal
2025-06-30 14:47   ` Niklas Cassel
2025-07-01  6:14   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 04/10] ata: libata-eh: Avoid unnecessary resets when revalidating devices Damien Le Moal
2025-06-30 14:47   ` Niklas Cassel [this message]
2025-07-01  6:23   ` Hannes Reinecke
2025-07-01  6:48     ` Damien Le Moal
2025-07-01  7:21       ` Hannes Reinecke
2025-07-01  9:24       ` Niklas Cassel
2025-07-01  9:25         ` Damien Le Moal
2025-06-30  6:26 ` [PATCH 05/10] ata: libata-sata: Disallow changing LPM state if not supported Damien Le Moal
2025-06-30 14:49   ` Niklas Cassel
2025-07-01  6:23   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 06/10] ata: ahci: Disable DIPM if host lacks support Damien Le Moal
2025-06-30 14:50   ` Niklas Cassel
2025-07-01  6:23   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 07/10] ata: ahci: Disallow LPM policy control for external ports Damien Le Moal
2025-06-30 14:50   ` Niklas Cassel
2025-07-01  6:24   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 08/10] ata: ahci: Disallow LPM policy control if not supported Damien Le Moal
2025-06-30  8:30   ` Sergey Shtylyov
2025-06-30 15:07   ` Niklas Cassel
2025-07-01  6:25   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 09/10] ata: libata-core: Reduce the number of messages signaling broken LPM Damien Le Moal
2025-06-30 15:08   ` Niklas Cassel
2025-07-01  6:26   ` Hannes Reinecke
2025-06-30  6:26 ` [PATCH 10/10] ata: libata_eh: Add debug messages to ata_eh_link_set_lpm() Damien Le Moal
2025-06-30 15:11   ` Niklas Cassel
2025-06-30 15:25     ` Sergey Shtylyov
2025-07-01  6:27   ` Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aGKjl4PtYfaFikfY@ryzen \
    --to=cassel@kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).