Re: [PATCH v6 4/4] SCT Write Same handle ATA_DFLAG_PIO

[Hannes Reinecke <hare@suse.de>]

On 08/22/2016 06:23 AM, Shaun Tancheff wrote:
> Use non DMA write log when ATA_DFLAG_PIO is set.
> 
> Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
> ---
> v6: Added check for ATA_DFLAG_PIO and fallback to non DMA write log for
>     SCT Write Same
> 
>  drivers/ata/libata-scsi.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 37f456e..e50b7a7 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3485,6 +3485,8 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
>  		tf->device = ATA_CMD_STANDBYNOW1;
>  		tf->protocol = ATA_PROT_DMA;
>  		tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
> +		if (unlikely(dev->flags & ATA_DFLAG_PIO))
> +			tf->command = ATA_CMD_WRITE_LOG_EXT;
>  	}
>  
>  	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
> 
Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)