* [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
@ 2008-05-16 16:46 bugme-daemon
2008-05-16 18:07 ` [Bug 10723] " bugme-daemon
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-16 16:46 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
Summary: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU
MHK2060AT
Product: IO/Storage
Version: 2.5
KernelVersion: 2.6.24.1
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
AssignedTo: io_ide@kernel-bugs.osdl.org
ReportedBy: juergen.kosel@gmx.de
Latest working kernel version:2.6.22.3 (Debian)
Earliest failing kernel version:2.6.24.1 (from kernel.org)
Distribution: Debian
Hardware Environment:Laptop Compaq Armada 4120
Software Environment: Debian Testing
Problem Description: When booting linux 2.6.24 (and also 2.6.25) it fails to
mount the rootfs (hda1, with the following messages:
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: DMA timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma disabled
ide0: reset: success
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local/premount ...
kinit: trying to resume from /dev/hda5
Attempting manual resume
kinit: No resume image, doing normal boot...
resume: libcript version: 1.4.1
Done.
JBD: no valid journal superblock found
EXT3-fs: error loading journal.
mount: Mounting /dev/hda1 on /root failed: invalid argument
When booting linux 2.6.22 the following could be retrieved:
compac:~# lspci -vv
00:00.0 Host bridge: OPTi Inc. 82C557 [Viper-M] (rev 14)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 ISA bridge: OPTi Inc. 82C558 [Viper-M ISA+IDE] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Kernel modules: ata_generic, generic
00:02.0 VGA compatible controller: Cirrus Logic GD 7548 (prog-if 00 [VGA
controller])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 41000000 (32-bit, non-prefetchable) [size=16M]
Kernel modules: cirrusfb
00:14.0 IDE interface: OPTi Inc. 82C621 [Viper-M/N+] (rev 12) (prog-if 80
[Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1000 [size=16]
Kernel driver in use: Opti621_IDE
Kernel modules: opti621
compac:~# dmesg
Linux version 2.6.22-3-486 (Debian 2.6.22-6) (maks@debian.org) (gcc version
4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Mon Nov 12 07:53:08 UTC 2007
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000003000000 (usable)
48MB LOWMEM available.
Entering add_active_range(0, 0, 12288) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 12288
early_node_map[1] active PFN ranges
0: 0 -> 12288
On node 0 totalpages: 12288
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 64 pages used for memmap
Normal zone: 8128 pages, LIFO batch:0
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 03000000:fd000000)
Built 1 zonelists. Total pages: 12192
Kernel command line: root=/dev/hda1 ro panic=5
No local APIC present or hardware disabled
mapped APIC to ffffd000 (01061000)
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Detected 120.691 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 39276k/49152k available (1656k kernel code, 9488k reserved, 650k data,
316k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xc3800000 - 0xfffb3000 ( 967 MB)
lowmem : 0xc0000000 - 0xc3000000 ( 48 MB)
.init : 0xc0344000 - 0xc0393000 ( 316 kB)
.data : 0xc029e27b - 0xc0340cc4 ( 650 kB)
.text : 0xc0100000 - 0xc029e27b (1656 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 242.28 BogoMIPS (lpj=484566)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from
ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf73d9, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5010
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x1a65, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI Error (evxfevnt-0186): Could not enable RealTimeClock event [20070126]
ACPI Warning (evxface-0145): Could not enable fixed event 4 [20070126]
pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:08: iomem range 0x100000-0x2ffffff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:13: ioport range 0x100-0x107 has been reserved
pnp: 00:13: ioport range 0x2a0-0x2a0 has been reserved
pnp: 00:13: ioport range 0x370-0x371 has been reserved
pnp: 00:13: iomem range 0xfffc0000-0xffffffff has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6144k freed
audit: initializing netlink socket (disabled)
audit(1210697492.240:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
thermal: Unknown symbol acpi_processor_set_thermal_limit
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
OPTI621: IDE controller at PCI slot 0000:00:14.0
OPTI621: chipset revision 18
OPTI621: not 100% native mode: will probe irqs later
PCI: Setting latency timer of device 0000:00:14.0 to 64
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
hda: FUJITSU MHK2060AT, ATA DISK drive
libata version 2.21 loaded.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63, (U)DMA
hda: cache flushes not supported
hda:<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda5<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda6 >
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
Attempting manual resume
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Real Time Clock Driver v1.12ac
parport_pc 00:01: reported by Plug and Play BIOS
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport1: PC-style at 0x3bc [PCSPP,TRISTATE]
parport2: PC-style at 0x278 [PCSPP,TRISTATE,EPP]
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Adding 75560k swap on /dev/hda5. Priority:-1 extents:1 across:75560k
EXT3 FS on hda1, internal journal
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
Intel ISA PCIC probe:
Cirrus PD672x ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: [ring] [65/6/3] [1/15/3]
host opts [1]: [ring] [65/6/3] [1/15/3]
ISA irqs (default) = 3,4,5,9,10,11 polling interval = 1000 ms
pccard: PCMCIA card inserted into slot 1
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337
0x388-0x38f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337
0x388-0x38f 0x400-0x40f 0x480-0x48f 0x4c0-0x4df
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
pcmcia: registering new device pcmcia1.0
cs: IO port probe 0xa00-0xaff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:98:6C:8E
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
compac:~#
The hardware is very old (> 10 years) so it might be dying hardware.
But what appears suspicious to me is the fact that older linux versions
succeed in mounting the rootfs.
Steps to reproduce:
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
@ 2008-05-16 18:07 ` bugme-daemon
2008-05-16 23:25 ` bugme-daemon
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-16 18:07 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
akpm@osdl.org changed:
What |Removed |Added
----------------------------------------------------------------------------
Regression|0 |1
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
2008-05-16 18:07 ` [Bug 10723] " bugme-daemon
@ 2008-05-16 23:25 ` bugme-daemon
2008-05-17 13:23 ` bugme-daemon
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-16 23:25 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
devzero@web.de changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |devzero@web.de
------- Comment #1 from devzero@web.de 2008-05-16 16:25 -------
does "ide=nodma" make a difference ?
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
2008-05-16 18:07 ` [Bug 10723] " bugme-daemon
2008-05-16 23:25 ` bugme-daemon
@ 2008-05-17 13:23 ` bugme-daemon
2008-05-17 13:33 ` bugme-daemon
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 13:23 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #2 from juergen.kosel@gmx.de 2008-05-17 06:23 -------
ide=nodma doesn't change much. It even still complains about the dma timeouts.
Except that it still fails to mount the rootfs it looks similar to this output
from 2.6.22.3:
Linux version 2.6.22-3-486 (Debian 2.6.22-6) (maks@debian.org) (gcc version
4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Mon Nov 12 07:53:08 UTC 2007
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000003000000 (usable)
48MB LOWMEM available.
Entering add_active_range(0, 0, 12288) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 12288
early_node_map[1] active PFN ranges
0: 0 -> 12288
On node 0 totalpages: 12288
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 64 pages used for memmap
Normal zone: 8128 pages, LIFO batch:0
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 03000000:fd000000)
Built 1 zonelists. Total pages: 12192
Kernel command line: root=/dev/hda1 ro ide=nodma
No local APIC present or hardware disabled
mapped APIC to ffffd000 (01061000)
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Detected 120.691 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 39276k/49152k available (1656k kernel code, 9488k reserved, 650k data,
316k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xc3800000 - 0xfffb3000 ( 967 MB)
lowmem : 0xc0000000 - 0xc3000000 ( 48 MB)
.init : 0xc0344000 - 0xc0393000 ( 316 kB)
.data : 0xc029e27b - 0xc0340cc4 ( 650 kB)
.text : 0xc0100000 - 0xc029e27b (1656 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 242.28 BogoMIPS (lpj=484574)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from
ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf73d9, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5010
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x1a65, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI Error (evxfevnt-0186): Could not enable RealTimeClock event [20070126]
ACPI Warning (evxface-0145): Could not enable fixed event 4 [20070126]
pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:08: iomem range 0x100000-0x2ffffff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:13: ioport range 0x100-0x107 has been reserved
pnp: 00:13: ioport range 0x2a0-0x2a0 has been reserved
pnp: 00:13: ioport range 0x370-0x371 has been reserved
pnp: 00:13: iomem range 0xfffc0000-0xffffffff has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6144k freed
audit: initializing netlink socket (disabled)
audit(1211029346.240:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
thermal: Unknown symbol acpi_processor_set_thermal_limit
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
OPTI621: IDE controller at PCI slot 0000:00:14.0
OPTI621: chipset revision 18
OPTI621: not 100% native mode: will probe irqs later
PCI: Setting latency timer of device 0000:00:14.0 to 64
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
hda: FUJITSU MHK2060AT, ATA DISK drive
libata version 2.21 loaded.
Floppy drive(s): fd0 is 1.44M
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
FDC 0 is a post-1991 82077
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63, (U)DMA
hda: cache flushes not supported
hda:<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda5<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda6 >
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
Attempting manual resume
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
parport_pc 00:01: reported by Plug and Play BIOS
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport1: PC-style at 0x3bc [PCSPP,TRISTATE]
Real Time Clock Driver v1.12ac
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Adding 75560k swap on /dev/hda5. Priority:-1 extents:1 across:75560k
EXT3 FS on hda1, internal journal
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (2 preceding siblings ...)
2008-05-17 13:23 ` bugme-daemon
@ 2008-05-17 13:33 ` bugme-daemon
2008-05-17 14:57 ` bugme-daemon
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 13:33 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #3 from sshtylyov@ru.mvista.com 2008-05-17 06:33 -------
(In reply to comment #1)
> does "ide=nodma" make a difference ?
This option has been obsoleted, use hda=nodma instead.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (3 preceding siblings ...)
2008-05-17 13:33 ` bugme-daemon
@ 2008-05-17 14:57 ` bugme-daemon
2008-05-17 15:00 ` bugme-daemon
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 14:57 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #4 from juergen.kosel@gmx.de 2008-05-17 07:57 -------
Hello,
also hda=nodma makes no difference.
But this time I found out that it is possible to mount the rootfs from the
initramfs busybox comandline as ext2:
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Detected 120.687 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 38896k/49152k available (1747k kernel code, 9868k reserved, 711k data,
324k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
vmalloc : 0xc3800000 - 0xfffb1000 ( 967 MB)
lowmem : 0xc0000000 - 0xc3000000 ( 48 MB)
.init : 0xc036a000 - 0xc03bb000 ( 324 kB)
.data : 0xc02b4d71 - 0xc0366bec ( 711 kB)
.text : 0xc0100000 - 0xc02b4d71 (1747 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 242.55 BogoMIPS (lpj=485115)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 000001bf 00000000 00000000 00000000 00000000
00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from
ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf73d9, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5010
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x1a65, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI Error (evxfevnt-0186): Could not enable RealTimeClock event [20070126]
ACPI Warning (evxface-0145): Could not enable fixed event 4 [20070126]
Time: tsc clocksource has been installed.
system 00:08: iomem range 0x0-0x9ffff could not be reserved
system 00:08: iomem range 0xf0000-0xfffff could not be reserved
system 00:08: iomem range 0x100000-0x2ffffff could not be reserved
system 00:13: ioport range 0x100-0x107 has been reserved
system 00:13: ioport range 0x2a0-0x2a0 has been reserved
system 00:13: ioport range 0x370-0x371 has been reserved
system 00:13: ioport range 0x374-0x374 has been reserved
system 00:13: ioport range 0x400-0x47f has been reserved
system 00:13: ioport range 0x480-0x4ff has been reserved
system 00:13: ioport range 0xcf7-0xcf7 has been reserved
system 00:13: iomem range 0xfffc0000-0xffffffff has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6372k freed
audit: initializing netlink socket (disabled)
audit(1211033382.013:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 324k freed
input: AT Translated Set 2 keyboard as /class/input/input0
thermal: Unknown symbol acpi_processor_set_thermal_limit
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
OPTI621: IDE controller (0x1045:0xc621 rev 0x12) at PCI slot 0000:00:14.0
OPTI621: not 100% native mode: will probe irqs later
PCI: Setting latency timer of device 0000:00:14.0 to 64
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
OPTI621: IDE port disabled
Probing IDE interface ide0...
SCSI subsystem initialized
hdb: IRQ probe failed (0xffffefb8)
hdb: IRQ probe failed (0xffffefb8)
libata version 3.00 loaded.
hda: FUJITSU MHK2060AT, ATA DISK drive
hda: host max PIO3 wanted PIO255(auto-tune) selected PIO3
hda: Selected PIO mode 3
ide0: master: address: 1, data: 3, recovery: 3, drdy: 2 [clk]
ide0: slave: address: 1, data: 1, recovery: 2, drdy: 2 [clk]
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63
hda: cache flushes not supported
hda:<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda5<4>hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda6 >
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
JBD: no valid journal superblock found
EXT3-fs: error loading journal.
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as
ext2
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
init_special_inode: bogus i_mode (54130)
JBD: no valid journal superblock found
EXT3-fs: error loading journal.
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as
ext2
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (4 preceding siblings ...)
2008-05-17 14:57 ` bugme-daemon
@ 2008-05-17 15:00 ` bugme-daemon
2008-05-17 16:20 ` bugme-daemon
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 15:00 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #5 from vladc6@yahoo.com 2008-05-17 08:00 -------
You might give libata a try by compiling a kernel with CONFIG_IDE=n.
Alternatively, try booting a distro like Fedora that defaults to libata to see
if it can access the hard drive.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (5 preceding siblings ...)
2008-05-17 15:00 ` bugme-daemon
@ 2008-05-17 16:20 ` bugme-daemon
2008-05-17 17:08 ` bugme-daemon
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 16:20 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #6 from bzolnier@gmail.com 2008-05-17 09:20 -------
If it is possible to mount it like ext2 but not ext3 it is quite likely to be
fs related issue and not IDE one (DMA timeouts are an orthogonal thing as they
are also present with 2.6.22 according to the log).
In any case you should be able to narrow down the source of the problem by
using git-bisect. Please install git package for your distribution, get kernel
git tree from kernel.org and do:
git bisect start
git bisect good 2.6.22
git bisect bad 2.6.24
It will select the kernel to test, compile and boot it to see if the problem is
there. If so do "git bisect bad" which will give you new kernel to test. If
the kernel works fine do "git bisect good" instead. After few iterations you
should find the exact commit which introduced the bug. Thanks!
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (6 preceding siblings ...)
2008-05-17 16:20 ` bugme-daemon
@ 2008-05-17 17:08 ` bugme-daemon
2008-05-17 18:37 ` bugme-daemon
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 17:08 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #7 from devzero@web.de 2008-05-17 10:08 -------
>> does "ide=nodma" make a difference ?
> This option has been obsoleted, use hda=nodma instead.
so if this is obsoleted, why does Documentation/kernel-parameters.txt still
mention that ?
ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler
See Documentation/ide/ide.txt.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (7 preceding siblings ...)
2008-05-17 17:08 ` bugme-daemon
@ 2008-05-17 18:37 ` bugme-daemon
2008-05-23 16:51 ` bugme-daemon
2008-05-28 22:13 ` bugme-daemon
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-17 18:37 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #8 from sshtylyov@ru.mvista.com 2008-05-17 11:37 -------
(In reply to comment #7)
> >> does "ide=nodma" make a difference ?
> > This option has been obsoleted, use hda=nodma instead.
Obsoleted in 2.6.24-rc1, see this:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c223701cf6c706f42840631c1ca919a18e6e2800
> so if this is obsoleted, why does Documentation/kernel-parameters.txt still
> mention that ?
> ide= [HW] (E)IDE subsystem
> Format: ide=nodma or ide=doubler
> See Documentation/ide/ide.txt.
Hm, looks like Bart forgot to remove this mention...
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (8 preceding siblings ...)
2008-05-17 18:37 ` bugme-daemon
@ 2008-05-23 16:51 ` bugme-daemon
2008-05-28 22:13 ` bugme-daemon
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-23 16:51 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
------- Comment #9 from juergen.kosel@gmx.de 2008-05-23 09:51 -------
Hello,
git bisect delivered the following:
912fb29a36a7269ac1c4a4df45bc0ac1d2637972 is first bad commit
commit 912fb29a36a7269ac1c4a4df45bc0ac1d2637972
Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri Oct 19 00:30:11 2007 +0200
opti621: always tune PIO
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
:040000 040000 ac8b9614dad447f22ebc105dcec5e94d52434c41
95facc970da3f5821b06b859340232abc2518813 M drivers
Which are changes of just 2 lines of code to allways enable autotune.
Either my hardware doesn't like it by construction or by agged electronic
components.
Greetings
Juergen
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
` (9 preceding siblings ...)
2008-05-23 16:51 ` bugme-daemon
@ 2008-05-28 22:13 ` bugme-daemon
10 siblings, 0 replies; 12+ messages in thread
From: bugme-daemon @ 2008-05-28 22:13 UTC (permalink / raw)
To: linux-ide
http://bugzilla.kernel.org/show_bug.cgi?id=10723
bzolnier@gmail.com changed:
What |Removed |Added
----------------------------------------------------------------------------
AssignedTo|io_ide@kernel-bugs.osdl.org |bzolnier@gmail.com
Status|NEW |ASSIGNED
------- Comment #10 from bzolnier@gmail.com 2008-05-28 15:13 -------
Could you please send output of "lspci -s 14.0 -vvv -xxx" command for good and
bad kernel?
Also please verify that booting good kernel with "hda=autotune" reproduces a
bug.
Thanks.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are the assignee for the bug, or are watching the assignee.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2008-05-28 22:14 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-16 16:46 [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT bugme-daemon
2008-05-16 18:07 ` [Bug 10723] " bugme-daemon
2008-05-16 23:25 ` bugme-daemon
2008-05-17 13:23 ` bugme-daemon
2008-05-17 13:33 ` bugme-daemon
2008-05-17 14:57 ` bugme-daemon
2008-05-17 15:00 ` bugme-daemon
2008-05-17 16:20 ` bugme-daemon
2008-05-17 17:08 ` bugme-daemon
2008-05-17 18:37 ` bugme-daemon
2008-05-23 16:51 ` bugme-daemon
2008-05-28 22:13 ` bugme-daemon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).