From: bugzilla-daemon@bugzilla.kernel.org
To: linux-ide@vger.kernel.org
Subject: [Bug 86611] New: USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14
Date: Mon, 20 Oct 2014 21:26:09 +0000 [thread overview]
Message-ID: <bug-86611-11633@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=86611
Bug ID: 86611
Summary: USB TO IDE Bridge stopped to work properly after
kernel upgrade linux-3.12.21 -> linux-3.14.14
Product: IO/Storage
Version: 2.5
Kernel Version: 3.14.14, 3.16.6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
Assignee: io_ide@kernel-bugs.osdl.org
Reporter: newchief@king.net.pl
Regression: No
As in summary: 058f:6390 USB to IDE bridge is not working anymore.
On linux-3.12.21 dmesg says:
[ 302.674422] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 302.674438] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 302.674464] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
[ 302.700011] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 302.804017] hub 1-0:1.0: debounce: port 4: total 125ms stable 100ms status
0x501
[ 302.855244] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 302.855248] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 302.906018] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 305.083246] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 305.083251] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 307.272882] usb 1-4: default language 0x0409
[ 307.273507] usb 1-4: udev 5, busnum 1, minor = 4
[ 307.273511] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 307.273515] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 307.273518] usb 1-4: Product: USB TO IDE Bridge
[ 307.273520] usb 1-4: Manufacturer: Generic
[ 307.273627] usb 1-4: usb_probe_device
[ 307.273631] usb 1-4: configuration #1 chosen from 1 choice
[ 307.273753] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[ 307.273778] usb-storage 1-4:1.0: usb_probe_interface
[ 307.273782] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 307.273785] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 307.275163] scsi9 : usb-storage 1-4:1.0
[ 307.275274] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 329.811259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 329.811267] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 329.862020] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 330.017254] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 330.017259] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 330.172408] scsi 9:0:0:0: Direct-Access Generic USB Disk 9.02
PQ: 0 ANSI: 2
[ 330.172653] sd 9:0:0:0: Attached scsi generic sg6 type 0
[ 330.173648] sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 330.174641] sd 9:0:0:0: [sdf] Write Protect is off
[ 330.174644] sd 9:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 330.176027] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.176030] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.181516] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.181520] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.204155] sdf: sdf1
[ 330.207903] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.207910] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.207914] sd 9:0:0:0: [sdf] Attached SCSI disk
On 3.14.14 it says:
[ 4280.846576] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001003 0 ACK
POWER sig=se0 CSC CONNECT
[ 4280.872016] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 4281.027259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4281.027263] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4281.078020] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 4283.255265] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4283.255275] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4285.446403] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 4285.446410] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4285.446412] usb 1-4: Product: USB TO IDE Bridge
[ 4285.446414] usb 1-4: Manufacturer: Generic
[ 4285.446538] usb 1-4: usb_probe_device
[ 4285.446673] usb-storage 1-4:1.0: usb_probe_interface
[ 4285.446677] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 4285.446681] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 4285.447407] scsi9 : usb-storage 1-4:1.0
[ 4307.805273] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4307.805282] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4307.856022] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 4308.018268] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4308.018273] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
And there's nothing after. I've found that on 3.14.14 scsi_probe_lun function
does not result in following output:
sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
which is the case for 3.12.21.
Also I tried Fedora with 3.16.6 - still USB TO IDE Bridge does not work
properly.
Some time ago 058f:6390 was quite popular and I think it would be good to have
it still supported (it is not listed as unusual device). I still have huge IDE
disks with archive storage, it would be wasteful to throw them away.
Note that other usb-storage devices (smartphones, SD card readers) work for me
properly with 3.14.14 and newer.
--
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2014-10-20 21:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 21:26 bugzilla-daemon [this message]
2014-10-20 23:05 ` [Bug 86611] USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14 bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-86611-11633@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).