[PATCH 0/5] davinci: da850: add SATA support

[PATCH 0/5] davinci: da850: add SATA support

[Sekhar Nori]

This series add support for platform AHCI driver on
DA850/OMAP-L138/AM18x. Towards this purpose, it also
adds support for forced module transtitions on PSC.

Sekhar Nori (5):
  davinci: psc.h: clean up indentation done using spaces
  davinci: pass clock flags to davinci_psc_config()
  davinci: enable forced transitions on PSC
  davinci: da850: add support for SATA interface
  davinci: da850 evm: register SATA device

 arch/arm/mach-davinci/board-da850-evm.c    |    7 ++
 arch/arm/mach-davinci/clock.c              |    8 +-
 arch/arm/mach-davinci/clock.h              |    1 +
 arch/arm/mach-davinci/da850.c              |    9 ++
 arch/arm/mach-davinci/devices-da8xx.c      |  126 +++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |    2 +
 arch/arm/mach-davinci/include/mach/psc.h   |  151 ++++++++++++++--------------
 arch/arm/mach-davinci/psc.c                |   14 +++-
 8 files changed, 237 insertions(+), 81 deletions(-)

-- 
1.7.3.2

[PATCH 1/5] davinci: psc.h: clean up indentation done using spaces

[Sekhar Nori]

psc.h has indentation using spaces at a number of places.
Fix this by indenting using tabs instead.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/include/mach/psc.h |  148 +++++++++++++++---------------
 1 files changed, 74 insertions(+), 74 deletions(-)

diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index a47e6f2..1110fdd 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -30,47 +30,47 @@
 #define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
 
 /* Power and Sleep Controller (PSC) Domains */
-#define DAVINCI_GPSC_ARMDOMAIN      0
-#define DAVINCI_GPSC_DSPDOMAIN      1
+#define DAVINCI_GPSC_ARMDOMAIN		0
+#define DAVINCI_GPSC_DSPDOMAIN		1
 
-#define DAVINCI_LPSC_VPSSMSTR       0
-#define DAVINCI_LPSC_VPSSSLV        1
-#define DAVINCI_LPSC_TPCC           2
-#define DAVINCI_LPSC_TPTC0          3
-#define DAVINCI_LPSC_TPTC1          4
-#define DAVINCI_LPSC_EMAC           5
-#define DAVINCI_LPSC_EMAC_WRAPPER   6
-#define DAVINCI_LPSC_USB            9
-#define DAVINCI_LPSC_ATA            10
-#define DAVINCI_LPSC_VLYNQ          11
-#define DAVINCI_LPSC_UHPI           12
-#define DAVINCI_LPSC_DDR_EMIF       13
-#define DAVINCI_LPSC_AEMIF          14
-#define DAVINCI_LPSC_MMC_SD         15
-#define DAVINCI_LPSC_McBSP          17
-#define DAVINCI_LPSC_I2C            18
-#define DAVINCI_LPSC_UART0          19
-#define DAVINCI_LPSC_UART1          20
-#define DAVINCI_LPSC_UART2          21
-#define DAVINCI_LPSC_SPI            22
-#define DAVINCI_LPSC_PWM0           23
-#define DAVINCI_LPSC_PWM1           24
-#define DAVINCI_LPSC_PWM2           25
-#define DAVINCI_LPSC_GPIO           26
-#define DAVINCI_LPSC_TIMER0         27
-#define DAVINCI_LPSC_TIMER1         28
-#define DAVINCI_LPSC_TIMER2         29
-#define DAVINCI_LPSC_SYSTEM_SUBSYS  30
-#define DAVINCI_LPSC_ARM            31
-#define DAVINCI_LPSC_SCR2           32
-#define DAVINCI_LPSC_SCR3           33
-#define DAVINCI_LPSC_SCR4           34
-#define DAVINCI_LPSC_CROSSBAR       35
-#define DAVINCI_LPSC_CFG27          36
-#define DAVINCI_LPSC_CFG3           37
-#define DAVINCI_LPSC_CFG5           38
-#define DAVINCI_LPSC_GEM            39
-#define DAVINCI_LPSC_IMCOP          40
+#define DAVINCI_LPSC_VPSSMSTR		0
+#define DAVINCI_LPSC_VPSSSLV		1
+#define DAVINCI_LPSC_TPCC		2
+#define DAVINCI_LPSC_TPTC0		3
+#define DAVINCI_LPSC_TPTC1		4
+#define DAVINCI_LPSC_EMAC		5
+#define DAVINCI_LPSC_EMAC_WRAPPER	6
+#define DAVINCI_LPSC_USB		9
+#define DAVINCI_LPSC_ATA		10
+#define DAVINCI_LPSC_VLYNQ		11
+#define DAVINCI_LPSC_UHPI		12
+#define DAVINCI_LPSC_DDR_EMIF		13
+#define DAVINCI_LPSC_AEMIF		14
+#define DAVINCI_LPSC_MMC_SD		15
+#define DAVINCI_LPSC_McBSP		17
+#define DAVINCI_LPSC_I2C		18
+#define DAVINCI_LPSC_UART0		19
+#define DAVINCI_LPSC_UART1		20
+#define DAVINCI_LPSC_UART2		21
+#define DAVINCI_LPSC_SPI		22
+#define DAVINCI_LPSC_PWM0		23
+#define DAVINCI_LPSC_PWM1		24
+#define DAVINCI_LPSC_PWM2		25
+#define DAVINCI_LPSC_GPIO		26
+#define DAVINCI_LPSC_TIMER0		27
+#define DAVINCI_LPSC_TIMER1		28
+#define DAVINCI_LPSC_TIMER2		29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS	30
+#define DAVINCI_LPSC_ARM		31
+#define DAVINCI_LPSC_SCR2		32
+#define DAVINCI_LPSC_SCR3		33
+#define DAVINCI_LPSC_SCR4		34
+#define DAVINCI_LPSC_CROSSBAR		35
+#define DAVINCI_LPSC_CFG27		36
+#define DAVINCI_LPSC_CFG3		37
+#define DAVINCI_LPSC_CFG5		38
+#define DAVINCI_LPSC_GEM		39
+#define DAVINCI_LPSC_IMCOP		40
 
 #define DM355_LPSC_TIMER3		5
 #define DM355_LPSC_SPI1			6
@@ -102,39 +102,39 @@
 /*
  * LPSC Assignments
  */
-#define DM646X_LPSC_ARM            0
-#define DM646X_LPSC_C64X_CPU       1
-#define DM646X_LPSC_HDVICP0        2
-#define DM646X_LPSC_HDVICP1        3
-#define DM646X_LPSC_TPCC           4
-#define DM646X_LPSC_TPTC0          5
-#define DM646X_LPSC_TPTC1          6
-#define DM646X_LPSC_TPTC2          7
-#define DM646X_LPSC_TPTC3          8
-#define DM646X_LPSC_PCI            13
-#define DM646X_LPSC_EMAC           14
-#define DM646X_LPSC_VDCE           15
-#define DM646X_LPSC_VPSSMSTR       16
-#define DM646X_LPSC_VPSSSLV        17
-#define DM646X_LPSC_TSIF0          18
-#define DM646X_LPSC_TSIF1          19
-#define DM646X_LPSC_DDR_EMIF       20
-#define DM646X_LPSC_AEMIF          21
-#define DM646X_LPSC_McASP0         22
-#define DM646X_LPSC_McASP1         23
-#define DM646X_LPSC_CRGEN0         24
-#define DM646X_LPSC_CRGEN1         25
-#define DM646X_LPSC_UART0          26
-#define DM646X_LPSC_UART1          27
-#define DM646X_LPSC_UART2          28
-#define DM646X_LPSC_PWM0           29
-#define DM646X_LPSC_PWM1           30
-#define DM646X_LPSC_I2C            31
-#define DM646X_LPSC_SPI            32
-#define DM646X_LPSC_GPIO           33
-#define DM646X_LPSC_TIMER0         34
-#define DM646X_LPSC_TIMER1         35
-#define DM646X_LPSC_ARM_INTC       45
+#define DM646X_LPSC_ARM		0
+#define DM646X_LPSC_C64X_CPU	1
+#define DM646X_LPSC_HDVICP0	2
+#define DM646X_LPSC_HDVICP1	3
+#define DM646X_LPSC_TPCC	4
+#define DM646X_LPSC_TPTC0	5
+#define DM646X_LPSC_TPTC1	6
+#define DM646X_LPSC_TPTC2	7
+#define DM646X_LPSC_TPTC3	8
+#define DM646X_LPSC_PCI		13
+#define DM646X_LPSC_EMAC	14
+#define DM646X_LPSC_VDCE	15
+#define DM646X_LPSC_VPSSMSTR	16
+#define DM646X_LPSC_VPSSSLV	17
+#define DM646X_LPSC_TSIF0	18
+#define DM646X_LPSC_TSIF1	19
+#define DM646X_LPSC_DDR_EMIF	20
+#define DM646X_LPSC_AEMIF	21
+#define DM646X_LPSC_McASP0	22
+#define DM646X_LPSC_McASP1	23
+#define DM646X_LPSC_CRGEN0	24
+#define DM646X_LPSC_CRGEN1	25
+#define DM646X_LPSC_UART0	26
+#define DM646X_LPSC_UART1	27
+#define DM646X_LPSC_UART2	28
+#define DM646X_LPSC_PWM0	29
+#define DM646X_LPSC_PWM1	30
+#define DM646X_LPSC_I2C		31
+#define DM646X_LPSC_SPI		32
+#define DM646X_LPSC_GPIO	33
+#define DM646X_LPSC_TIMER0	34
+#define DM646X_LPSC_TIMER1	35
+#define DM646X_LPSC_ARM_INTC	45
 
 /* PSC0 defines */
 #define DA8XX_LPSC0_TPCC		0
@@ -243,7 +243,7 @@
 #define PSC_STATE_DISABLE	2
 #define PSC_STATE_ENABLE	3
 
-#define MDSTAT_STATE_MASK 0x1f
+#define MDSTAT_STATE_MASK	0x1f
 
 #ifndef __ASSEMBLER__
 
-- 
1.7.3.2

[PATCH 2/5] davinci: pass clock flags to davinci_psc_config()

[Sekhar Nori]

Enabling or disabling a PSC can take certain
modifiers like "disable with reset", "force
enable/disable" and "enable/disable with local
reset" apart from the regular clock gating
functionality.

Pass a flags argument to davinci_psc_config()
so these variations can be supported there.

At this time only "disable with reset" is
supported, but other functionality will be
added in subsequent patches.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/clock.c            |    8 +++-----
 arch/arm/mach-davinci/include/mach/psc.h |    2 +-
 arch/arm/mach-davinci/psc.c              |   12 +++++++++++-
 3 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index e4e3af1..d0450ac 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				PSC_STATE_ENABLE);
+				true, clk->flags);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk)
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
 	    (clk->flags & CLK_PSC))
 		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
-				(clk->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, clk->flags);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -239,8 +238,7 @@ static int __init clk_disable_unused(void)
 		pr_debug("Clocks: disable unused %s\n", ck->name);
 
 		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
-				(ck->flags & PSC_SWRSTDISABLE) ?
-				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+				false, ck->flags);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 1110fdd..be9d63e 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -249,7 +249,7 @@
 
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, u32 next_state);
+		unsigned int id, bool enable, u32 flags);
 
 #endif
 
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index a415804..823cb1b 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,6 +25,8 @@
 #include <mach/cputype.h>
 #include <mach/psc.h>
 
+#include "clock.h"
+
 /* Return nonzero iff the domain's clock is active */
 int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
@@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, u32 next_state)
+		unsigned int id, bool enable, u32 flags)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	u32 next_state = PSC_STATE_ENABLE;
 
 	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
 		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
@@ -62,6 +65,13 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 
 	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 
+	if (!enable) {
+		if (flags & PSC_SWRSTDISABLE)
+			next_state = PSC_STATE_SWRSTDISABLE;
+		else
+			next_state = PSC_STATE_DISABLE;
+	}
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
-- 
1.7.3.2

[PATCH v2 3/5] davinci: enable forced transitions on PSC

[Sekhar Nori]

Some DaVinci modules like the SATA on DA850
need forced module state transitions.

Define a "force" flag which can be passed to
the PSC config function to enable it to make
forced transitions.

Forced transitions shouldn't normally be attempted,
unless the TRM explicitly specifies its usage.

ChangeLog:
v2:
Modified to take care of the fact that
davinci_psc_config() now takes the flags
directly.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/clock.h            |    1 +
 arch/arm/mach-davinci/include/mach/psc.h |    1 +
 arch/arm/mach-davinci/psc.c              |    2 ++
 3 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 0dd2203..48ee462 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -111,6 +111,7 @@ struct clk {
 #define CLK_PLL			BIT(4) /* PLL-derived clock */
 #define PRE_PLL			BIT(5) /* source is before PLL mult/div */
 #define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
+#define PSC_FORCE		BIT(7) /* Force module state transtition */
 
 #define CLK(dev, con, ck) 	\
 	{			\
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index be9d63e..47fd0bc 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -244,6 +244,7 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x1f
+#define MDCTL_FORCE		BIT(31)
 
 #ifndef __ASSEMBLER__
 
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 823cb1b..1fb6bdf 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -75,6 +75,8 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
+	if (flags & PSC_FORCE)
+		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
 	pdstat = __raw_readl(psc_base + PDSTAT);
-- 
1.7.3.2

[PATCH v3 4/5] davinci: da850: add support for SATA interface

[Sekhar Nori]

Add support for SATA controller on the
DA850/OMAP-L138/AM18x devices.

The patch adds the necessary clocks, platform
resources and a routine to initialize the SATA
controller.

The PHY configuration in this patch is
courtesy the work done by Zegeye Alemu,
Swaminathan and Mansoor Ahamed from TI.

While testing this patch, enable port multiplier
support iff you are actually using one. The
reasons of this behaviour are discussed
here: http://patchwork.ozlabs.org/patch/78163/

ChangeLog:
v3:
Removed fields which were being initialized
to zero in PHY configuration. Moved SATA base
address definition to the top of the file to
make it inline with what is done for the rest
of the modules.
v2:
Addressed comments from Sergei. Removed unnecessary
braces and removed unnecessary else after goto.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/da850.c              |    9 ++
 arch/arm/mach-davinci/devices-da8xx.c      |  126 ++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |    2 +
 3 files changed, 137 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 133aac4..2c1fad5 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -373,6 +373,14 @@ static struct clk spi1_clk = {
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk sata_clk = {
+	.name		= "sata",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_SATA,
+	.gpsc		= 1,
+	.flags		= PSC_FORCE,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -419,6 +427,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK("ahci",		NULL,		&sata_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fc4e98e..2f7e719 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -14,6 +14,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_8250.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
 
 #include <mach/cputype.h>
 #include <mach/common.h>
@@ -33,6 +35,7 @@
 #define DA8XX_SPI0_BASE			0x01c41000
 #define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
+#define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
@@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	return platform_device_register(&da8xx_spi_device[instance]);
 }
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static struct resource da850_sata_resources[] = {
+	{
+		.start	= DA850_SATA_BASE,
+		.end	= DA850_SATA_BASE + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA850_SATAINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG	0x178
+
+#define SATA_PHY_MPY(x)		((x) << 0)
+#define SATA_PHY_LOS(x)		((x) << 6)
+#define SATA_PHY_RXCDR(x)	((x) << 10)
+#define SATA_PHY_RXEQ(x)	((x) << 13)
+#define SATA_PHY_TXSWING(x)	((x) << 19)
+#define SATA_PHY_ENPLL(x)	((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+	KHZ_TO_HZ(300000),
+	KHZ_TO_HZ(250000),
+	0,			/* Reserved */
+	KHZ_TO_HZ(187500),
+	KHZ_TO_HZ(150000),
+	KHZ_TO_HZ(125000),
+	KHZ_TO_HZ(120000),
+	KHZ_TO_HZ(100000),
+	KHZ_TO_HZ(75000),
+	KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+	int i, ret;
+	unsigned int val;
+
+	da850_sata_clk = clk_get(dev, NULL);
+	if (IS_ERR(da850_sata_clk))
+		return PTR_ERR(da850_sata_clk);
+
+	ret = clk_enable(da850_sata_clk);
+	if (ret)
+		goto err0;
+
+	/* Enable SATA clock receiver */
+	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+	val &= ~BIT(0);
+	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+	/* Get the multiplier needed for 1.5GHz PLL output */
+	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+		if (da850_sata_xtal[i] == da850_sata_refclkpn)
+			break;
+
+	if (i == ARRAY_SIZE(da850_sata_xtal)) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	val = SATA_PHY_MPY(i + 1) |
+		SATA_PHY_LOS(1) |
+		SATA_PHY_RXCDR(4) |
+		SATA_PHY_RXEQ(1) |
+		SATA_PHY_TXSWING(3) |
+		SATA_PHY_ENPLL(1);
+
+	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+	return 0;
+
+err1:
+	clk_disable(da850_sata_clk);
+err0:
+	clk_put(da850_sata_clk);
+	return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+	clk_disable(da850_sata_clk);
+	clk_put(da850_sata_clk);
+}
+
+static struct ahci_platform_data da850_sata_pdata = {
+	.init	= da850_sata_init,
+	.exit	= da850_sata_exit,
+};
+
+static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device da850_sata_device = {
+	.name	= "ahci",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &da850_sata_pdata,
+		.dma_mask		= &da850_sata_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da850_sata_resources),
+	.resource	= da850_sata_resources,
+};
+
+int __init da850_register_sata(unsigned long refclkpn)
+{
+	da850_sata_refclkpn = refclkpn;
+	if (!da850_sata_refclkpn)
+		return -EINVAL;
+
+	return platform_device_register(&da850_sata_device);
+}
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index ad64da7..eaca7d8 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -57,6 +57,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
 #define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
 #define DA8XX_DEEPSLEEP_REG	0x8
+#define DA8XX_PWRDN_REG		0x18
 
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
@@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
+int __init da850_register_sata(unsigned long refclkpn);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
-- 
1.7.3.2

[PATCH 5/5] davinci: da850 evm: register SATA device

[Sekhar Nori]

Register the platform device for SATA interface
present on the DA850/OMAP-L138/AM18x EVM.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/board-da850-evm.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index a7b41bf..3d2c0d7 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1117,6 +1117,8 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -1237,6 +1239,11 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
 				ret);
+
+	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+	if (ret)
+		pr_warning("da850_evm_init: sata registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-- 
1.7.3.2