From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
To: Damien Le Moal <dlemoal@kernel.org>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
<linux-ide@vger.kernel.org>, <mika.westerberg@intel.com>,
<anshuman.gupta@intel.com>,
"Kurmi, Suresh Kumar" <suresh.kumar.kurmi@intel.com>,
"Saarinen, Jani" <jani.saarinen@intel.com>,
<lucas.demarchi@intel.com>
Subject: Re: Regression on linux-next (next-20250708)
Date: Mon, 28 Jul 2025 21:54:54 +0530 [thread overview]
Message-ID: <d34d122f-2ef8-44f1-83c9-92c7b9e83b6e@intel.com> (raw)
In-Reply-To: <f3f779e3-e269-4ac9-9bed-042859d98a83@kernel.org>
On 7/28/2025 9:41 AM, Damien Le Moal wrote:
> On 7/25/25 3:43 PM, Borah, Chaitanya Kumar wrote:
>> For some context in our kms_pm_rpm tests, we enable min_power policy for SATA
>> so that we can reach deep runtime power states and restore the original policy
>> after finishing. [5][6]
>>
>> IIUC, the above change is based on spec and not something which can be
>> reverted. So as I see it, we have to drop this code path for external ports.
>> However I am not sure if we can achieve deep power states without enforcing it
>> through the sysfs entry.
>>
>> Atleast for the basic-rte subtest, the test passes if we comment out the
>> functions controlling the SATA ports. We will need more testing to determine if
>> this approach work. Any thoughts on it?
>>
>> Also, are there other ways to detect a port is external other than receiving
>> EOPNOTSUPP on the sysfs write?
>
> The attached patch adds the "link_power_management_supported" sysfs device
> attribute for drives connected to AHCI. Would that work for you ?
>
Yes this could work. I quickly hacked the test to ignore writing policy
if this file returns 0.
Here is the state of the machine I am testing on.
/sys/class/scsi_host/host0/link_power_management_supported: 0
/sys/class/scsi_host/host1/link_power_management_supported: 0
/sys/class/scsi_host/host2/link_power_management_supported: 0
/sys/class/scsi_host/host3/link_power_management_supported: 0
/sys/class/scsi_host/host4/link_power_management_supported: 1
/sys/class/scsi_host/host5/link_power_management_supported: 1
/sys/class/scsi_host/host6/link_power_management_supported: 1
/sys/class/scsi_host/host7/link_power_management_supported: 1
Regards
Chaitanya
> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> index 229429ba5027..495fa096dd65 100644
> --- a/drivers/ata/ata_piix.c
> +++ b/drivers/ata/ata_piix.c
> @@ -1089,6 +1089,7 @@ static struct ata_port_operations ich_pata_ops = {
> };
>
> static struct attribute *piix_sidpr_shost_attrs[] = {
> + &dev_attr_link_power_management_supported.attr,
> &dev_attr_link_power_management_policy.attr,
> NULL
> };
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index b335fb7e5cb4..c79abdfcd7a9 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -111,6 +111,7 @@ static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
> static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL);
>
> static struct attribute *ahci_shost_attrs[] = {
> + &dev_attr_link_power_management_supported.attr,
> &dev_attr_link_power_management_policy.attr,
> &dev_attr_em_message_type.attr,
> &dev_attr_em_message.attr,
> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
> index 0708686ca58a..82a1a72e47bf 100644
> --- a/drivers/ata/libata-sata.c
> +++ b/drivers/ata/libata-sata.c
> @@ -900,6 +900,18 @@ static const char *ata_lpm_policy_names[] = {
> [ATA_LPM_MIN_POWER] = "min_power",
> };
>
> +static ssize_t ata_scsi_lpm_supported_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct Scsi_Host *shost = class_to_shost(dev);
> + struct ata_port *ap = ata_shost_to_port(shost);
> +
> + return sysfs_emit(buf, "%d\n", !(ap->flags & ATA_FLAG_NO_LPM));
> +}
> +DEVICE_ATTR(link_power_management_supported, S_IRUGO,
> + ata_scsi_lpm_supported_show, NULL);
> +EXPORT_SYMBOL_GPL(dev_attr_link_power_management_supported);
> +
> static ssize_t ata_scsi_lpm_store(struct device *device,
> struct device_attribute *attr,
> const char *buf, size_t count)
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 1c0580627dbb..e9a6f37bd7f9 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -547,6 +547,7 @@ typedef void (*ata_postreset_fn_t)(struct ata_link *link,
> unsigned int *classes)
>
> extern struct device_attribute dev_attr_unload_heads;
> #ifdef CONFIG_SATA_HOST
> +extern struct device_attribute dev_attr_link_power_management_supported;
> extern struct device_attribute dev_attr_link_power_management_policy;
> extern struct device_attribute dev_attr_ncq_prio_supported;
> extern struct device_attribute dev_attr_ncq_prio_enable;
>
>
next prev parent reply other threads:[~2025-07-28 16:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-25 6:43 Regression on linux-next (next-20250708) Borah, Chaitanya Kumar
2025-07-25 10:33 ` Damien Le Moal
2025-07-28 16:37 ` Borah, Chaitanya Kumar
2025-07-28 22:20 ` Damien Le Moal
2025-07-28 4:11 ` Damien Le Moal
2025-07-28 16:24 ` Borah, Chaitanya Kumar [this message]
2025-07-28 22:33 ` Damien Le Moal
2025-07-29 8:43 ` Borah, Chaitanya Kumar
2025-07-28 5:31 ` Damien Le Moal
2025-07-28 16:33 ` Borah, Chaitanya Kumar
2025-07-28 22:30 ` Damien Le Moal
2025-07-29 8:58 ` Borah, Chaitanya Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d34d122f-2ef8-44f1-83c9-92c7b9e83b6e@intel.com \
--to=chaitanya.kumar.borah@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=dlemoal@kernel.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=linux-ide@vger.kernel.org \
--cc=lucas.demarchi@intel.com \
--cc=mika.westerberg@intel.com \
--cc=suresh.kumar.kurmi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox