From mboxrd@z Thu Jan 1 00:00:00 1970 From: sean Subject: 2.6.12-rc2 ahci and piix modules fail on ich6r Date: Sun, 17 Apr 2005 16:12:00 -0400 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from main.gmane.org ([80.91.229.2]:35753 "EHLO ciao.gmane.org") by vger.kernel.org with ESMTP id S261524AbVDQUZI (ORCPT ); Sun, 17 Apr 2005 16:25:08 -0400 Received: from root by ciao.gmane.org with local (Exim 4.43) id 1DNGG2-0007t1-KL for linux-ide@vger.kernel.org; Sun, 17 Apr 2005 22:20:42 +0200 Received: from ool-4356fcdd.dyn.optonline.net ([67.86.252.221]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 17 Apr 2005 22:20:42 +0200 Received: from seandarcy2 by ool-4356fcdd.dyn.optonline.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 17 Apr 2005 22:20:42 +0200 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org I have a gigabyte GA-8i915g Pro mobo, with a 82801FR (ICH6) hub (checked with lspci). One SATA Maxtor 6B300S0. I've used the ata-piix compiled in the past ( not as a module). That worked. So, messing around I rebuilt with support for the ahci module in 2.6.12-rc2 and left in the ata-piix module. This is the boot drive, and it fails. If I rebuild again without the ahci module ( same config otherwise - ata -piix as a module ) it still fails! BTW, the RedHat fedora fc4 kernels fail. It's the same problem since they're module based. But, the fc3 kernels work. Odd So I rebuilt again with ahci built in - no ata-piix. That failed. Then I tried BOTH. That worked. dmesg shows: libata version 1.10 loaded. ata_piix version 1.03 To sum up, the only way I've been able to boot is using ata-piix built in - not as a module. And ahci won't load with ich6. sean