* 2.6.12-rc2 ahci and piix modules fail on ich6r
@ 2005-04-17 20:12 sean
0 siblings, 0 replies; only message in thread
From: sean @ 2005-04-17 20:12 UTC (permalink / raw)
To: linux-ide
I have a gigabyte GA-8i915g Pro mobo, with a 82801FR (ICH6)
hub (checked with lspci). One SATA Maxtor 6B300S0. I've
used the ata-piix compiled in the past ( not as a module).
That worked.
So, messing around I rebuilt with support for the ahci
module in 2.6.12-rc2 and left in the ata-piix module.
This is the boot drive, and it fails. If I rebuild again
without the ahci module ( same config otherwise - ata -piix
as a module ) it still fails!
BTW, the RedHat fedora fc4 kernels fail. It's the same
problem since they're module based. But, the fc3 kernels
work. Odd
So I rebuilt again with ahci built in - no ata-piix. That
failed. Then I tried BOTH. That worked. dmesg shows:
libata version 1.10 loaded.
ata_piix version 1.03
To sum up, the only way I've been able to boot is using
ata-piix built in - not as a module.
And ahci won't load with ich6.
sean
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-04-17 20:25 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-17 20:12 2.6.12-rc2 ahci and piix modules fail on ich6r sean
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).