From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alessandro Bono Subject: Re: [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix Date: Sat, 30 Sep 2006 10:59:23 +0200 Message-ID: References: <11595988092938-git-send-email-htejun@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7Bit Return-path: Received: from main.gmane.org ([80.91.229.2]:17129 "EHLO ciao.gmane.org") by vger.kernel.org with ESMTP id S1751178AbWI3JFJ (ORCPT ); Sat, 30 Sep 2006 05:05:09 -0400 Received: from root by ciao.gmane.org with local (Exim 4.43) id 1GTamM-0006iO-9b for linux-ide@vger.kernel.org; Sat, 30 Sep 2006 11:05:02 +0200 Received: from ppp-96-10.29-151.libero.it ([151.29.10.96]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 30 Sep 2006 11:05:02 +0200 Received: from alessandro.bono by ppp-96-10.29-151.libero.it with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 30 Sep 2006 11:05:02 +0200 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Tejun Heo wrote: > Please test this patchset. If you don't feel comfortable with handling > patch series, this patchset is also available as... Hi Tejun I can confirm that 2.6.18-git3 + this patchset boot perfectly without any delay libata version 2.00 loaded. ata_piix 0000:00:1f.1: version 2.00ac6 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix input: AT Translated Set 2 keyboard as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100A 0000 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM MATSHITA UJ-820D 1.01 PQ: 0 ANSI: 5 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda ..... sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ..... sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5