From: Kishon Vijay Abraham I <kishon@ti.com>
To: Corentin Labbe <clabbe.montjoie@gmail.com>,
<alexandre.torgue@st.com>, <mripard@kernel.org>, <wens@csie.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>, <axboe@kernel.dk>
Cc: <linux-ide@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-sunxi@googlegroups.com>
Subject: Re: ata: sunxi: Regression due to 5253fe05bb47 ("phy: core: Add consumer device link support")
Date: Thu, 9 Jan 2020 15:27:49 +0530 [thread overview]
Message-ID: <f79dbcea-ea69-3687-1a2a-6d396cda4113@ti.com> (raw)
In-Reply-To: <20200109095403.GA26453@Red>
Hi,
On 09/01/20 3:24 PM, Corentin Labbe wrote:
> Hello
>
> On next-20200108 (at least), the sunxi_ahci fail to probe with:
> 3.025955] 8<--- cut here ---
> [ 3.029012] Unable to handle kernel NULL pointer dereference at virtual address 00000071
> [ 3.037115] pgd = (ptrval)
> [ 3.039819] [00000071] *pgd=00000000
> [ 3.043408] Internal error: Oops: 5 [#1] SMP ARM
> [ 3.048019] Modules linked in:
> [ 3.051078] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc1-00004-g5253fe05bb47 #24
> [ 3.059067] Hardware name: Allwinner sun7i (A20) Family
> [ 3.064297] PC is at device_link_add+0x68/0x4c8
> [ 3.068824] LR is at device_link_add+0x68/0x4c8
> [ 3.073348] pc : [<c04783ac>] lr : [<c04783ac>] psr: 60000013
> [ 3.079605] sp : ef04dd68 ip : 60000013 fp : 00000007
> [ 3.084822] r10: 00000000 r9 : eea8a740 r8 : ef0a5c10
> [ 3.090039] r7 : ef0a5c10 r6 : ffffffed r5 : 00000001 r4 : 00000001
> [ 3.096556] r3 : ef060000 r2 : 00000000 r1 : 00000000 r0 : c0a4e588
> [ 3.103076] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> [ 3.110201] Control: 10c5387d Table: 4000406a DAC: 00000051
> [ 3.115937] Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
> [ 3.121936] Stack: (0xef04dd68 to 0xef04e000)
> [ 3.126292] dd60: 000005e4 c02141e4 ef7bf970 ffffffed ef0a5c10 eea8a7c0
> [ 3.134461] dd80: 00000000 ef0a5c10 eea8a740 00000000 00000007 c03acaec 00000000 ee8a3700
> [ 3.142630] dda0: ef7bf970 ee8a3700 ef0a5c10 c04d2804 ef04c000 ef0a5c10 ef0a5c00 ee8a3700
> [ 3.150799] ddc0: 00000000 00000000 00000000 c04d2e20 00000001 c029b2bc c0a4f9fc 00000000
> [ 3.158969] dde0: ef0b3630 c029aec8 00000000 5aef773a eea8c478 ef0a5c10 00000000 ef0a5c00
> [ 3.167138] de00: 00000000 00000000 c0a4f9fc 00000000 00000007 c04cedfc ef0a5c10 00000000
> [ 3.175307] de20: c0a4f9fc c047d6b8 c0aa51dc ef0a5c10 c0aa51e0 00000000 00000000 c047b894
> [ 3.183476] de40: ef0a5c10 c0a4f9fc c0a4f9fc c047be38 c093d834 c09004a8 000000d8 c047bb84
> [ 3.191646] de60: 000000d8 c05a37c0 c0760330 ef0a5c10 00000000 c0a4f9fc c047be38 c093d834
> [ 3.199815] de80: c09004a8 000000d8 00000007 c047be30 00000000 c0a4f9fc ef0a5c10 c047be90
> [ 3.207984] dea0: ef0fc634 ef04c000 c0a4f9fc c0479c68 c09004a8 ef01e458 ef0fc634 5aef773a
> [ 3.216152] dec0: c0a4df18 c0a4f9fc eea8a300 c0a4df18 00000000 c047acb0 c083ac48 c0aa5870
> [ 3.224321] dee0: c0a4f9fc c0a4f9fc c091eff4 00000000 ffffe000 c047c6fc c0a6fc40 c091eff4
> [ 3.232491] df00: 00000000 c01026e8 effffe6e c013c488 00000000 c08b9d00 c0845f90 00000000
> [ 3.240660] df20: 00000006 00000006 c07ff574 00000000 c0809bd8 c07ff5e8 00000000 effffe67
> [ 3.248829] df40: effffe6a 5aef773a 00000000 00000006 c0a6fc40 5aef773a c093d850 c0952220
> [ 3.256998] df60: c0a6fc40 c0a6fc40 c093d854 c0900ed0 00000006 00000006 00000000 c09004a8
> [ 3.265167] df80: 00000000 00000000 c06f7a9c 00000000 00000000 00000000 00000000 00000000
> [ 3.273335] dfa0: 00000000 c06f7aa4 00000000 c01010e8 00000000 00000000 00000000 00000000
> [ 3.281504] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 3.289672] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
> [ 3.297858] [<c04783ac>] (device_link_add) from [<c03acaec>] (devm_of_phy_get+0x64/0xb0)
> [ 3.305947] [<c03acaec>] (devm_of_phy_get) from [<c04d2804>] (ahci_platform_get_phy+0x28/0xd0)
> [ 3.314552] [<c04d2804>] (ahci_platform_get_phy) from [<c04d2e20>] (ahci_platform_get_resources+0x234/0x448)
> [ 3.324372] [<c04d2e20>] (ahci_platform_get_resources) from [<c04cedfc>] (ahci_sunxi_probe+0x10/0xa8)
> [ 3.333585] [<c04cedfc>] (ahci_sunxi_probe) from [<c047d6b8>] (platform_drv_probe+0x48/0x98)
> [ 3.342017] [<c047d6b8>] (platform_drv_probe) from [<c047b894>] (really_probe+0x1e0/0x348)
> [ 3.350267] [<c047b894>] (really_probe) from [<c047bb84>] (driver_probe_device+0x60/0x16c)
> [ 3.358525] [<c047bb84>] (driver_probe_device) from [<c047be30>] (device_driver_attach+0x58/0x60)
> [ 3.367390] [<c047be30>] (device_driver_attach) from [<c047be90>] (__driver_attach+0x58/0xcc)
> [ 3.375908] [<c047be90>] (__driver_attach) from [<c0479c68>] (bus_for_each_dev+0x78/0xb8)
> [ 3.384080] [<c0479c68>] (bus_for_each_dev) from [<c047acb0>] (bus_add_driver+0x1b4/0x1d4)
> [ 3.392337] [<c047acb0>] (bus_add_driver) from [<c047c6fc>] (driver_register+0x74/0x108)
> [ 3.400423] [<c047c6fc>] (driver_register) from [<c01026e8>] (do_one_initcall+0x78/0x1d4)
> [ 3.408598] [<c01026e8>] (do_one_initcall) from [<c0900ed0>] (kernel_init_freeable+0x138/0x1d4)
> [ 3.417291] [<c0900ed0>] (kernel_init_freeable) from [<c06f7aa4>] (kernel_init+0x8/0x110)
> [ 3.425462] [<c06f7aa4>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> [ 3.433019] Exception stack(0xef04dfb0 to 0xef04dff8)
> [ 3.438065] dfa0: 00000000 00000000 00000000 00000000
> [ 3.446234] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 3.454400] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 3.461010] Code: e59f0464 03844040 eb0a0b7b eb004882 (e5d63084)
> [ 3.467153] ---[ end trace 0dbbaca7a7b65a4b ]---
>
> The problem was bisected to 5253fe05bb47a2402f471d76078b3dcc66442d6c ("phy: core: Add consumer device link support")
> Reverting this patch fix the problem
This should be fixed in the latest -next branch. Please try it and let
me us know.
Thanks
Kishon
next prev parent reply other threads:[~2020-01-09 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 9:54 ata: sunxi: Regression due to 5253fe05bb47 ("phy: core: Add consumer device link support") Corentin Labbe
2020-01-09 9:57 ` Kishon Vijay Abraham I [this message]
2020-01-09 10:23 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f79dbcea-ea69-3687-1a2a-6d396cda4113@ti.com \
--to=kishon@ti.com \
--cc=alexandre.torgue@st.com \
--cc=axboe@kernel.dk \
--cc=broonie@kernel.org \
--cc=clabbe.montjoie@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox