From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnaud Patard Subject: Re: Sis180 Jetway S755Max Date: Mon, 29 Aug 2005 15:29:22 +0200 Message-ID: References: <4309A268.8090203@gmx.net> <430AA69A.1030307@verizon.net> <430AD885.4080001@gmx.net> <430B63D1.6080108@verizon.net> <430B91C1.6040407@verizon.net> <430B9D0A.3060202@gmx.net> <430C11C7.8010308@verizon.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from ezoffice.mandriva.com ([84.14.106.134]:19731 "EHLO anduin.mandrakesoft.com") by vger.kernel.org with ESMTP id S1750933AbVH2NZQ (ORCPT ); Mon, 29 Aug 2005 09:25:16 -0400 In-Reply-To: <430C11C7.8010308@verizon.net> (Wes Newell's message of "Wed, 24 Aug 2005 01:20:55 -0500") Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Wes Newell Cc: Uwe Koziolek , "linux.ide" Wes Newell writes: > Uwe Koziolek wrote: > >>Hello Wes, >> >>i include for you a hothack for SiS180 into the sata5513, untested and >>not pretty. >> >> >> > I tried this one first. It found the controller but errored out. here > the relevant dmesg. > > Linux version 2.6.11-12mdkcustom (root@wes2.com) (gcc version 3.4.3 > (Mandrakelinux 10.2 3.4.3-7mdk)) #1 Tue Aug 23 23:58:08 CDT 2005 > > SIS5513: IDE controller at PCI slot 0000:00:0c.0 > SIS5513: chipset revision 0 > SIS5513: IDE controller at PCI slot 0000:00:0c.0 > SIS5513: chipset revision 0 > SIS_IDE: probe of 0000:00:0c.0 failed with error -1 > > strange.. it's like the driver didn't recognize your chipset. According to Jetway you have a 963L MuTIOL chipset which is afaik supported by the driver. Could you try the sis5113.c I've attached ? It's the same one as the one submitted by Uwe. I only added some silly printks. >>additional i include the patch submitted by Arnaud Patard. >> >> >> > I'm not sure how or to which sata_sis.c file to apply this. I've got > the one that came with the above kernel, and then I've got the one I the sata_sis from the 2.6.11-12mdk is the same as the one on kernel.org. > downloaded from SIS that locks up the system when a pata drive is > installed on the sis180. The first was simple enough, just replaced > the original sis5513.c and recompiled the kernel. Don't know what to > do with this one. > >>If the last one works, it is the better solution, with chances to be >>included into the kernel. >> >> >> > Is the sata_sis patch suppossed to add pata support. Can't tell from > his message and the code is greek to me. I've configured the registers of the card when in pata mode but it's not tested (I've only a SiS964L and SiS182 handy). I've only tested SATA mode for SiS180 and SiS182. Regards, Arnaud Patard