From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnaud Patard Subject: Re: maintenence sata_sis Date: Mon, 22 Aug 2005 13:48:25 +0200 Message-ID: References: <4309A268.8090203@gmx.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from zeus1.kernel.org ([204.152.191.4]:53638 "EHLO zeus1.kernel.org") by vger.kernel.org with ESMTP id S1751178AbVHVWL2 (ORCPT ); Mon, 22 Aug 2005 18:11:28 -0400 Received: from anduin.mandrakesoft.com (ezoffice.mandriva.com [84.14.106.134]) by zeus1.kernel.org (8.13.1/8.13.1) with ESMTP id j7MBjkQs005267 for ; Mon, 22 Aug 2005 04:45:49 -0700 In-Reply-To: <4309A268.8090203@gmx.net> (Uwe Koziolek's message of "Mon, 22 Aug 2005 12:01:12 +0200") Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Uwe Koziolek Cc: Jeff Garzik , linux-ide@vger.kernel.org, Rainer.Koenig@fujitsu-siemens.com Uwe Koziolek writes: > Hello Jeff, Hi > > currently it exists 3 variants to support the SiS182 Chipset > - use SiS182 with the code from SiS180, only add the PCI-ID to the driver Adding only the pci-id is not a good solution as the registers of the second sata port have differents addresses than the one of the SiS180 chipset. To sum-up, with this patch, only the first port will work. > - the source code from OSDL > - the source code from www.sis.com Jeff issued some comments about their patch for adding the support of the SiS182. Regards, Arnaud