From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp.codeaurora.org ([198.145.29.96]:35064 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750781AbcBHTLu (ORCPT ); Mon, 8 Feb 2016 14:11:50 -0500 From: "Sricharan" To: "'Michael Welling'" , "'Wolfram Sang'" Cc: "'Daniel Baluta'" , "'Jonathan Cameron'" , "'Hartmut Knaack'" , "'Lars-Peter Clausen'" , "'Peter Meerwald-Stadler'" , "'Linux Kernel Mailing List'" , , "'Lucas De Marchi'" , "'Andy Gross'" , "'Pramod Gurav'" , "'Bjorn Andersson'" , "'Guenter Roeck'" , , References: <1454678238-16313-1-git-send-email-daniel.baluta@intel.com> <20160205172457.GA16778@deathstar> <20160206003245.GA1329@deathstar> <20160208102459.GC2220@tetsubishi> <20160208163632.GA3630@deathstar> In-Reply-To: <20160208163632.GA3630@deathstar> Subject: RE: [PATCH v4] iio: adc: Add TI ADS1015 ADC driver support Date: Tue, 9 Feb 2016 00:41:35 +0530 Message-ID: <01fd01d162a4$8e28c450$aa7a4cf0$@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org Hi, > -----Original Message----- > From: Michael Welling [mailto:mwelling79@gmail.com] On Behalf Of Michael > Welling > Sent: Monday, February 08, 2016 10:07 PM > To: Wolfram Sang > Cc: Daniel Baluta; Jonathan Cameron; Hartmut Knaack; Lars-Peter Clausen; > Peter Meerwald-Stadler; Linux Kernel Mailing List; linux-iio@vger.kernel.org; > Lucas De Marchi; Andy Gross; Pramod Gurav; Bjorn Andersson; Guenter > Roeck; eibach@gdsys.de; Sricharan R; linux-arm-msm@vger.kernel.org > Subject: Re: [PATCH v4] iio: adc: Add TI ADS1015 ADC driver support > > On Mon, Feb 08, 2016 at 11:25:00AM +0100, Wolfram Sang wrote: > > On Fri, Feb 05, 2016 at 06:32:45PM -0600, Michael Welling wrote: > > > On Fri, Feb 05, 2016 at 09:32:34PM +0200, Daniel Baluta wrote: > > > > >> +static int ads1015_read_raw(struct iio_dev *indio_dev, > > > > >> + struct iio_chan_spec const *chan, int *val, > > > > >> + int *val2, long mask) { > > > > >> + int ret, idx; > > > > >> + struct ads1015_data *data = iio_priv(indio_dev); > > > > >> + > > > > >> + mutex_lock(&data->lock); > > > > >> + switch (mask) { > > > > >> + case IIO_CHAN_INFO_RAW: > > > > >> + if (iio_buffer_enabled(indio_dev)) { > > > > >> + ret = -EBUSY; > > > > >> + break; > > > > >> + } > > > > >> + > > > > >> + ret = ads1015_set_power_state(data, true); > > > > >> + if (ret < 0) > > > > >> + break; > > > > > > > > > > Just tested the driver on a Dragonboard 410C with a robotics > > > > > mezzanine that I designed. > > > > > > > > > > The above ads1015_set_power_state(data, true) is always returning - > EINVAL. > > > > > > > > > > Any ideas why that would be happening? > > > > > I think it may be the return from pm_runtime_get_sync? > > > > > > > > Can you confirm that pm_runtime_get_sync fails? Using some printk? > > > > > > > > Also adding printks in suspend/resume function would be helpful. > > > > Do you have CONFIG_PM enabled? > > > > > > > > > > Indeed it is the pm_runtime_get_sync that fails with a -EINVAL. > > > > > > > > > > > > > When I comment out the break the readings come back but are not > updated continually. > > > > > If I read in_voltage0-voltage1_raw then in_voltage0_raw the value is > updated. > > > > > > > > I guess this is normal if set_power_state fails. > > > > > > The hwmod driver works fine BTW. > > > > > > My guess is there is an issue with the qup i2c driver seeing as it > > > has worked on other system without issue. > > > > > > CC'd some the latest developer on the qup i2c driver. > > > > > > I2C guys have any ideas on this? > > > > > > > Adding some more people who recently worked on this. Might be nice to > > know which kernel version you are using. > > Which i2c bus is this connected to ? I can give a try with 410c to see why pm_runtime_get_sync from qup fails. Regards, Sricharan