From: Jonathan Cameron <jic23@cam.ac.uk>
To: linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Subject: [PATCH 05/16] staging:iio:adc:ad7152 use smbus read / write functions + checkpatch fixes
Date: Fri, 26 Aug 2011 11:19:22 +0100 [thread overview]
Message-ID: <1314353973-7662-6-git-send-email-jic23@cam.ac.uk> (raw)
In-Reply-To: <1314353973-7662-1-git-send-email-jic23@cam.ac.uk>
This is fine IF I have read the data sheet correctly.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
---
drivers/staging/iio/adc/ad7152.c | 418 +++++++++++++------------------------
1 files changed, 147 insertions(+), 271 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7152.c b/drivers/staging/iio/adc/ad7152.c
index 21f5f38..8dbc00c 100644
--- a/drivers/staging/iio/adc/ad7152.c
+++ b/drivers/staging/iio/adc/ad7152.c
@@ -17,6 +17,9 @@
#include "../sysfs.h"
/*
+ * TODO: Check compliance of calibscale and calibbias with abi (units)
+ */
+/*
* AD7152 registers definition
*/
@@ -24,18 +27,12 @@
#define AD7152_STATUS_RDY1 (1 << 0)
#define AD7152_STATUS_RDY2 (1 << 1)
#define AD7152_CH1_DATA_HIGH 1
-#define AD7152_CH1_DATA_LOW 2
#define AD7152_CH2_DATA_HIGH 3
-#define AD7152_CH2_DATA_LOW 4
#define AD7152_CH1_OFFS_HIGH 5
-#define AD7152_CH1_OFFS_LOW 6
#define AD7152_CH2_OFFS_HIGH 7
-#define AD7152_CH2_OFFS_LOW 8
#define AD7152_CH1_GAIN_HIGH 9
-#define AD7152_CH1_GAIN_LOW 10
#define AD7152_CH1_SETUP 11
#define AD7152_CH2_GAIN_HIGH 12
-#define AD7152_CH2_GAIN_LOW 13
#define AD7152_CH2_SETUP 14
#define AD7152_CFG 15
#define AD7152_RESEVERD 16
@@ -51,13 +48,13 @@
struct ad7152_chip_info {
struct i2c_client *client;
- u16 ch1_offset; /* Channel 1 offset calibration coefficient */
- u16 ch1_gain; /* Channel 1 gain coefficient */
u8 ch1_setup;
- u16 ch2_offset; /* Channel 2 offset calibration coefficient */
- u16 ch2_gain; /* Channel 1 gain coefficient */
u8 ch2_setup;
- u8 filter_rate_setup; /* Capacitive channel digital filter setup; conversion time/update rate setup per channel */
+ /*
+ * Capacitive channel digital filter setup;
+ * conversion time/update rate setup per channel
+ */
+ u8 filter_rate_setup;
char *conversion_mode;
};
@@ -77,65 +74,13 @@ ad7152_conv_mode_table[AD7152_MAX_CONV_MODE] = {
};
/*
- * ad7152 register access by I2C
- */
-
-static int ad7152_i2c_read(struct ad7152_chip_info *chip, u8 reg, u8 *data, int len)
-{
- struct i2c_client *client = chip->client;
- int ret;
-
- ret = i2c_master_send(client, ®, 1);
- if (ret < 0) {
- dev_err(&client->dev, "I2C write error\n");
- return ret;
- }
-
- ret = i2c_master_recv(client, data, len);
- if (ret < 0) {
- dev_err(&client->dev, "I2C read error\n");
- }
-
- return ret;
-}
-
-static int ad7152_i2c_write(struct ad7152_chip_info *chip, u8 reg, u8 data)
-{
- struct i2c_client *client = chip->client;
- int ret;
-
- u8 tx[2] = {
- reg,
- data,
- };
-
- ret = i2c_master_send(client, tx, 2);
- if (ret < 0)
- dev_err(&client->dev, "I2C write error\n");
-
- return ret;
-}
-
-/*
* sysfs nodes
*/
-#define IIO_DEV_ATTR_AVAIL_CONVERSION_MODES(_show) \
+#define IIO_DEV_ATTR_AVAIL_CONVERSION_MODES(_show) \
IIO_DEVICE_ATTR(available_conversion_modes, S_IRUGO, _show, NULL, 0)
#define IIO_DEV_ATTR_CONVERSION_MODE(_mode, _show, _store) \
IIO_DEVICE_ATTR(conversion_mode, _mode, _show, _store, 0)
-#define IIO_DEV_ATTR_CH1_OFFSET(_mode, _show, _store) \
- IIO_DEVICE_ATTR(ch1_offset, _mode, _show, _store, 0)
-#define IIO_DEV_ATTR_CH2_OFFSET(_mode, _show, _store) \
- IIO_DEVICE_ATTR(ch2_offset, _mode, _show, _store, 0)
-#define IIO_DEV_ATTR_CH1_GAIN(_mode, _show, _store) \
- IIO_DEVICE_ATTR(ch1_gain, _mode, _show, _store, 0)
-#define IIO_DEV_ATTR_CH2_GAIN(_mode, _show, _store) \
- IIO_DEVICE_ATTR(ch2_gain, _mode, _show, _store, 0)
-#define IIO_DEV_ATTR_CH1_VALUE(_show) \
- IIO_DEVICE_ATTR(ch1_value, S_IRUGO, _show, NULL, 0)
-#define IIO_DEV_ATTR_CH2_VALUE(_show) \
- IIO_DEVICE_ATTR(ch2_value, S_IRUGO, _show, NULL, 0)
#define IIO_DEV_ATTR_CH1_SETUP(_mode, _show, _store) \
IIO_DEVICE_ATTR(ch1_setup, _mode, _show, _store, 0)
#define IIO_DEV_ATTR_CH2_SETUP(_mode, _show, _store) \
@@ -151,7 +96,8 @@ static ssize_t ad7152_show_conversion_modes(struct device *dev,
int len = 0;
for (i = 0; i < AD7152_MAX_CONV_MODE; i++)
- len += sprintf(buf + len, "%s ", ad7152_conv_mode_table[i].name);
+ len += sprintf(buf + len, "%s ",
+ ad7152_conv_mode_table[i].name);
len += sprintf(buf + len, "\n");
@@ -160,34 +106,6 @@ static ssize_t ad7152_show_conversion_modes(struct device *dev,
static IIO_DEV_ATTR_AVAIL_CONVERSION_MODES(ad7152_show_conversion_modes);
-static ssize_t ad7152_show_ch1_value(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- u8 data[2];
-
- ad7152_i2c_read(chip, AD7152_CH1_DATA_HIGH, data, 2);
- return sprintf(buf, "%d\n", ((int)data[0] << 8) | data[1]);
-}
-
-static IIO_DEV_ATTR_CH1_VALUE(ad7152_show_ch1_value);
-
-static ssize_t ad7152_show_ch2_value(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- u8 data[2];
-
- ad7152_i2c_read(chip, AD7152_CH2_DATA_HIGH, data, 2);
- return sprintf(buf, "%d\n", ((int)data[0] << 8) | data[1]);
-}
-
-static IIO_DEV_ATTR_CH2_VALUE(ad7152_show_ch2_value);
-
static ssize_t ad7152_show_conversion_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -206,16 +124,23 @@ static ssize_t ad7152_store_conversion_mode(struct device *dev,
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7152_chip_info *chip = iio_priv(dev_info);
u8 cfg;
- int i;
+ int i, ret;
- ad7152_i2c_read(chip, AD7152_CFG, &cfg, 1);
+ ret = i2c_smbus_read_byte_data(chip->client, AD7152_CFG);
+ if (ret < 0)
+ return ret;
+ cfg = ret;
for (i = 0; i < AD7152_MAX_CONV_MODE; i++)
if (strncmp(buf, ad7152_conv_mode_table[i].name,
- strlen(ad7152_conv_mode_table[i].name) - 1) == 0) {
+ strlen(ad7152_conv_mode_table[i].name) - 1) ==
+ 0) {
chip->conversion_mode = ad7152_conv_mode_table[i].name;
cfg |= 0x18 | ad7152_conv_mode_table[i].reg_cfg;
- ad7152_i2c_write(chip, AD7152_CFG, cfg);
+ ret = i2c_smbus_write_byte_data(chip->client,
+ AD7152_CFG, cfg);
+ if (ret < 0)
+ return ret;
return len;
}
@@ -228,150 +153,6 @@ static IIO_DEV_ATTR_CONVERSION_MODE(S_IRUGO | S_IWUSR,
ad7152_show_conversion_mode,
ad7152_store_conversion_mode);
-static ssize_t ad7152_show_ch1_offset(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
-
- return sprintf(buf, "%d\n", chip->ch1_offset);
-}
-
-static ssize_t ad7152_store_ch1_offset(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- int ret;
-
- ret = strict_strtoul(buf, 10, &data);
-
- if ((!ret) && (data < 0x10000)) {
- ad7152_i2c_write(chip, AD7152_CH1_OFFS_HIGH, data >> 8);
- ad7152_i2c_write(chip, AD7152_CH1_OFFS_LOW, data);
- chip->ch1_offset = data;
- return len;
- }
-
- return -EINVAL;
-}
-
-static IIO_DEV_ATTR_CH1_OFFSET(S_IRUGO | S_IWUSR,
- ad7152_show_ch1_offset,
- ad7152_store_ch1_offset);
-
-static ssize_t ad7152_show_ch2_offset(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
-
- return sprintf(buf, "%d\n", chip->ch2_offset);
-}
-
-static ssize_t ad7152_store_ch2_offset(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- int ret;
-
- ret = strict_strtoul(buf, 10, &data);
-
- if ((!ret) && (data < 0x10000)) {
- ad7152_i2c_write(chip, AD7152_CH2_OFFS_HIGH, data >> 8);
- ad7152_i2c_write(chip, AD7152_CH2_OFFS_LOW, data);
- chip->ch2_offset = data;
- return len;
- }
-
- return -EINVAL;
-}
-
-static IIO_DEV_ATTR_CH2_OFFSET(S_IRUGO | S_IWUSR,
- ad7152_show_ch2_offset,
- ad7152_store_ch2_offset);
-
-static ssize_t ad7152_show_ch1_gain(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
-
- return sprintf(buf, "%d\n", chip->ch1_gain);
-}
-
-static ssize_t ad7152_store_ch1_gain(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- int ret;
-
- ret = strict_strtoul(buf, 10, &data);
-
- if ((!ret) && (data < 0x10000)) {
- ad7152_i2c_write(chip, AD7152_CH1_GAIN_HIGH, data >> 8);
- ad7152_i2c_write(chip, AD7152_CH1_GAIN_LOW, data);
- chip->ch1_gain = data;
- return len;
- }
-
- return -EINVAL;
-}
-
-static IIO_DEV_ATTR_CH1_GAIN(S_IRUGO | S_IWUSR,
- ad7152_show_ch1_gain,
- ad7152_store_ch1_gain);
-
-static ssize_t ad7152_show_ch2_gain(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
-
- return sprintf(buf, "%d\n", chip->ch2_gain);
-}
-
-static ssize_t ad7152_store_ch2_gain(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev *dev_info = dev_get_drvdata(dev);
- struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
- int ret;
-
- ret = strict_strtoul(buf, 10, &data);
-
- if ((!ret) && (data < 0x10000)) {
- ad7152_i2c_write(chip, AD7152_CH2_GAIN_HIGH, data >> 8);
- ad7152_i2c_write(chip, AD7152_CH2_GAIN_LOW, data);
- chip->ch2_gain = data;
- return len;
- }
-
- return -EINVAL;
-}
-
-static IIO_DEV_ATTR_CH2_GAIN(S_IRUGO | S_IWUSR,
- ad7152_show_ch2_gain,
- ad7152_store_ch2_gain);
-
static ssize_t ad7152_show_ch1_setup(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -389,18 +170,20 @@ static ssize_t ad7152_store_ch1_setup(struct device *dev,
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
+ u8 data;
int ret;
- ret = strict_strtoul(buf, 10, &data);
+ ret = kstrtou8(buf, 10, &data);
+ if (ret < 0)
+ return ret;
- if ((!ret) && (data < 0x100)) {
- ad7152_i2c_write(chip, AD7152_CH1_SETUP, data);
- chip->ch1_setup = data;
- return len;
- }
+ ret = i2c_smbus_write_byte_data(chip->client, AD7152_CH1_SETUP, data);
+ if (ret < 0)
+ return ret;
- return -EINVAL;
+ chip->ch1_setup = data;
+
+ return len;
}
static IIO_DEV_ATTR_CH1_SETUP(S_IRUGO | S_IWUSR,
@@ -424,18 +207,20 @@ static ssize_t ad7152_store_ch2_setup(struct device *dev,
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
+ u8 data;
int ret;
- ret = strict_strtoul(buf, 10, &data);
+ ret = kstrtou8(buf, 10, &data);
+ if (ret < 0)
+ return ret;
- if ((!ret) && (data < 0x100)) {
- ad7152_i2c_write(chip, AD7152_CH2_SETUP, data);
- chip->ch2_setup = data;
- return len;
- }
+ ret = i2c_smbus_write_byte_data(chip->client, AD7152_CH2_SETUP, data);
+ if (ret < 0)
+ return ret;
- return -EINVAL;
+ chip->ch2_setup = data;
+
+ return len;
}
static IIO_DEV_ATTR_CH2_SETUP(S_IRUGO | S_IWUSR,
@@ -459,18 +244,20 @@ static ssize_t ad7152_store_filter_rate_setup(struct device *dev,
{
struct iio_dev *dev_info = dev_get_drvdata(dev);
struct ad7152_chip_info *chip = iio_priv(dev_info);
- unsigned long data;
+ u8 data;
int ret;
- ret = strict_strtoul(buf, 10, &data);
+ ret = kstrtou8(buf, 10, &data);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(chip->client, AD7152_CFG2, data);
+ if (ret < 0)
+ return ret;
- if ((!ret) && (data < 0x100)) {
- ad7152_i2c_write(chip, AD7152_CFG2, data);
- chip->filter_rate_setup = data;
- return len;
- }
+ chip->filter_rate_setup = data;
- return -EINVAL;
+ return len;
}
static IIO_DEV_ATTR_FILTER_RATE_SETUP(S_IRUGO | S_IWUSR,
@@ -480,12 +267,6 @@ static IIO_DEV_ATTR_FILTER_RATE_SETUP(S_IRUGO | S_IWUSR,
static struct attribute *ad7152_attributes[] = {
&iio_dev_attr_available_conversion_modes.dev_attr.attr,
&iio_dev_attr_conversion_mode.dev_attr.attr,
- &iio_dev_attr_ch1_gain.dev_attr.attr,
- &iio_dev_attr_ch2_gain.dev_attr.attr,
- &iio_dev_attr_ch1_offset.dev_attr.attr,
- &iio_dev_attr_ch2_offset.dev_attr.attr,
- &iio_dev_attr_ch1_value.dev_attr.attr,
- &iio_dev_attr_ch2_value.dev_attr.attr,
&iio_dev_attr_ch1_setup.dev_attr.attr,
&iio_dev_attr_ch2_setup.dev_attr.attr,
&iio_dev_attr_filter_rate_setup.dev_attr.attr,
@@ -496,10 +277,103 @@ static const struct attribute_group ad7152_attribute_group = {
.attrs = ad7152_attributes,
};
+static const u8 ad7152_addresses[][3] = {
+ { AD7152_CH1_DATA_HIGH, AD7152_CH1_OFFS_HIGH, AD7152_CH1_GAIN_HIGH },
+ { AD7152_CH2_DATA_HIGH, AD7152_CH2_OFFS_HIGH, AD7152_CH2_GAIN_HIGH },
+};
+static int ad7152_write_raw(struct iio_dev *dev_info,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct ad7152_chip_info *chip = iio_priv(dev_info);
+ int ret;
+
+ switch (mask) {
+ case (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE):
+ if ((val < 0) | (val > 0xFFFF))
+ return -EINVAL;
+ ret = i2c_smbus_write_word_data(chip->client,
+ ad7152_addresses[chan->channel][2],
+ val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+
+ case (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE):
+ if ((val < 0) | (val > 0xFFFF))
+ return -EINVAL;
+ ret = i2c_smbus_write_word_data(chip->client,
+ ad7152_addresses[chan->channel][1],
+ val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+static int ad7152_read_raw(struct iio_dev *dev_info,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct ad7152_chip_info *chip = iio_priv(dev_info);
+ int ret;
+
+ switch (mask) {
+ case 0:
+ ret = i2c_smbus_read_word_data(chip->client,
+ ad7152_addresses[chan->channel][0]);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE):
+ /* FIXME: Hmm. very small. it's 1+ 1/(2^16 *val) */
+ ret = i2c_smbus_read_word_data(chip->client,
+ ad7152_addresses[chan->channel][2]);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE):
+ ret = i2c_smbus_read_word_data(chip->client,
+ ad7152_addresses[chan->channel][1]);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ };
+}
static const struct iio_info ad7152_info = {
.attrs = &ad7152_attribute_group,
+ .read_raw = &ad7152_read_raw,
+ .write_raw = &ad7152_write_raw,
.driver_module = THIS_MODULE,
};
+
+static const struct iio_chan_spec ad7152_channels[] = {
+ {
+ .type = IIO_CAPACITANCE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE) |
+ (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE),
+ }, {
+ .type = IIO_CAPACITANCE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask = (1 << IIO_CHAN_INFO_CALIBSCALE_SEPARATE) |
+ (1 << IIO_CHAN_INFO_CALIBBIAS_SEPARATE),
+ }
+};
/*
* device probe and remove
*/
@@ -526,6 +400,8 @@ static int __devinit ad7152_probe(struct i2c_client *client,
indio_dev->name = id->name;
indio_dev->dev.parent = &client->dev;
indio_dev->info = &ad7152_info;
+ indio_dev->channels = ad7152_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7152_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
ret = iio_device_register(indio_dev);
--
1.7.3.4
next prev parent reply other threads:[~2011-08-26 10:19 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-26 10:19 [PATCH 00/16] staging:iio: CDC and other driver updates Jonathan Cameron
2011-08-26 10:19 ` [PATCH 01/16] staging:iio:dac:ad5791 chan spec conversion Jonathan Cameron
2011-08-26 10:19 ` [PATCH 02/16] staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control Jonathan Cameron
2011-08-26 10:19 ` [PATCH 03/16] staging:iio:adc:ad7150: remove conversion mode handling Jonathan Cameron
2011-08-26 10:19 ` [PATCH 04/16] staging:iio:adc:ad7150: Add support for the second interrupt strobe Jonathan Cameron
2011-08-26 10:19 ` Jonathan Cameron [this message]
2011-08-26 10:19 ` [PATCH 06/16] staging:iio:adc:ad7152 set correct number of channels for ad7153 Jonathan Cameron
2011-08-26 10:19 ` [PATCH 07/16] staging:iio:adc:ad7152 bring more into line with abi Jonathan Cameron
2011-08-26 10:19 ` [PATCH 08/16] staging:iio:adc:ad7152: increase readability by introducing proper bit defines Jonathan Cameron
2011-08-26 10:19 ` [PATCH 09/16] staging:iio:adc:ad7152: Miscellaneous fixes and touch-up Jonathan Cameron
2011-08-26 10:19 ` [PATCH 10/16] staging:iio:adc:ad7152: update scale handling Jonathan Cameron
2011-08-26 10:19 ` [PATCH 11/16] staging:iio:adc:ad7152: Add proper locking Jonathan Cameron
2011-08-26 10:19 ` [PATCH 12/16] staging:iio:adc:ad7152: Update sample rate, conversion time, digital filter handling Jonathan Cameron
2011-08-26 10:19 ` [PATCH 13/16] staging:iio:adc:ad7152: Fix differential channel return value and increase delay Jonathan Cameron
2011-08-26 10:19 ` [PATCH 14/16] staging:iio:adc:ad7291 bring into line with current abi + chan_spec conversion Jonathan Cameron
2011-08-26 10:19 ` [PATCH 15/16] staging:iio:imu:adis16400 cleanups Jonathan Cameron
2011-08-26 10:19 ` [PATCH 16/16] iio: imu: adis16400: Avoid using printk facility Jonathan Cameron
2011-09-02 16:24 ` [PATCH 00/16] staging:iio: CDC and other driver updates Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314353973-7662-6-git-send-email-jic23@cam.ac.uk \
--to=jic23@cam.ac.uk \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).