From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Michael Hennerich <michael.hennerich@analog.com>,
<linux-iio@vger.kernel.org>,
<device-drivers-devel@blackfin.uclinux.org>, <drivers@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH] staging:iio:adc: Add AD7265/AD7266 support
Date: Thu, 8 Dec 2011 09:44:12 +0100 [thread overview]
Message-ID: <1323333852-4975-1-git-send-email-lars@metafoo.de> (raw)
This patch adds support for the Analog Devices AD7265 and AD7266
Analog-to-Digital converters.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/staging/iio/adc/Kconfig | 10 +
drivers/staging/iio/adc/Makefile | 1 +
drivers/staging/iio/adc/ad7266.c | 407 ++++++++++++++++++++++++++++++++++++++
drivers/staging/iio/adc/ad7266.h | 54 +++++
4 files changed, 472 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/adc/ad7266.c
create mode 100644 drivers/staging/iio/adc/ad7266.h
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index c310a68..58f9821 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -13,6 +13,16 @@ config AD7091
Say yes here to build support for Analog Devices AD7091
ADC.
+config AD7266
+ tristate "Analog Devices AD7265/AD7266 ADC driver"
+ select IIO_BUFFER
+ select IIO_TRIGGER
+ select IIO_SW_RING
+ depends on SPI_MASTER
+ help
+ Say yes here to build support for Analog Devices AD7265 and AD7266
+ ADC.
+
config AD7291
tristate "Analog Devices AD7291 ADC driver"
depends on I2C
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 6e3b807..85a3eb7 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -30,6 +30,7 @@ ad7298-$(CONFIG_IIO_BUFFER) += ad7298_ring.o
obj-$(CONFIG_AD7298) += ad7298.o
obj-$(CONFIG_AD7091) += ad7091.o
+obj-$(CONFIG_AD7266) += ad7266.o
obj-$(CONFIG_AD7291) += ad7291.o
obj-$(CONFIG_AD7780) += ad7780.o
obj-$(CONFIG_AD7793) += ad7793.o
diff --git a/drivers/staging/iio/adc/ad7266.c b/drivers/staging/iio/adc/ad7266.c
new file mode 100644
index 0000000..684b0d0
--- /dev/null
+++ b/drivers/staging/iio/adc/ad7266.c
@@ -0,0 +1,407 @@
+/*
+ * AD7266/65 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <linux/interrupt.h>
+
+#include "../iio.h"
+#include "../trigger_consumer.h"
+#include "../buffer.h"
+#include "../ring_sw.h"
+
+#include "ad7266.h"
+
+struct ad7266_state {
+ struct spi_device *spi;
+ struct regulator *reg;
+ unsigned long vref_uv;
+
+ struct spi_transfer single_xfer[3];
+ struct spi_message single_msg;
+
+ enum ad7266_range range;
+ enum ad7266_mode mode;
+ bool fixed_addr;
+ struct gpio gpios[3];
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ uint8_t data[ALIGN(4, sizeof(s64)) + sizeof(s64)] ____cacheline_aligned;
+};
+
+static irqreturn_t ad7266_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct iio_buffer *buffer = indio_dev->buffer;
+ struct ad7266_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = spi_read(st->spi, st->data, 4);
+ if (ret == 0) {
+ if (buffer->scan_timestamp)
+ ((s64 *)st->data)[2] = pf->timestamp;
+ iio_push_to_buffer(buffer, (u8 *)st->data, pf->timestamp);
+ }
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+
+static void ad7266_select_input(struct ad7266_state *st, unsigned int nr)
+{
+ unsigned int i;
+
+ if (st->fixed_addr)
+ return;
+
+ switch (st->mode) {
+ case AD7266_MODE_SINGLE_ENDED:
+ nr >>= 1;
+ break;
+ case AD7266_MODE_PSEUDO_DIFF:
+ nr |= 1;
+ break;
+ case AD7266_MODE_DIFF:
+ nr &= ~1;
+ break;
+ }
+
+ for (i = 0; i < 3; ++i)
+ gpio_set_value(st->gpios[i].gpio, (bool)(nr & BIT(i)));
+}
+
+int ad7266_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct ad7266_state *st = iio_priv(indio_dev);
+ unsigned int nr = __ffs(*scan_mask);
+
+ ad7266_select_input(st, nr);
+
+ return 0;
+}
+
+static int ad7266_read_single(struct ad7266_state *st, int *val,
+ unsigned int address)
+{
+ int ret;
+
+ ad7266_select_input(st, address);
+
+ ret = spi_sync(st->spi, &st->single_msg);
+ *val = be16_to_cpu(st->data[address % 2]);
+
+ return ret;
+}
+
+static int ad7266_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long m)
+{
+ struct ad7266_state *st = iio_priv(indio_dev);
+ unsigned long scale_uv;
+ int ret;
+
+ switch (m) {
+ case 0:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ ret = ad7266_read_single(st, val, chan->address);
+ if (ret)
+ return ret;
+
+ *val = (*val >> 2) & 0xfff;
+ if (chan->scan_type.sign == 's')
+ *val = sign_extend32(*val, 11);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ scale_uv = (st->vref_uv * 100);
+ if (st->range == AD7266_RANGE_2VREF)
+ scale_uv *= 2;
+
+ scale_uv >>= chan->scan_type.realbits;
+ *val = scale_uv / 100000;
+ *val2 = (scale_uv % 100000) * 10;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OFFSET:
+ if (st->range == AD7266_RANGE_2VREF &&
+ st->mode == AD7266_MODE_SINGLE_ENDED)
+ *val = -2048;
+ else
+ *val = 0;
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+#define AD7266_CHAN(_chan, _sign) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan), \
+ .address = (_chan), \
+ .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT \
+ | IIO_CHAN_INFO_OFFSET_SHARED_BIT, \
+ .scan_index = (_chan), \
+ .scan_type = IIO_ST((_sign), 12, 16, 2), \
+}
+
+#define AD7266_DECLARE_SINGLE_ENDED_CHANNELS(_name, _sign) \
+const struct iio_chan_spec ad7266_channels_##_name[] = { \
+ AD7266_CHAN(0, (_sign)), \
+ AD7266_CHAN(1, (_sign)), \
+ AD7266_CHAN(2, (_sign)), \
+ AD7266_CHAN(3, (_sign)), \
+ AD7266_CHAN(4, (_sign)), \
+ AD7266_CHAN(5, (_sign)), \
+ AD7266_CHAN(6, (_sign)), \
+ AD7266_CHAN(7, (_sign)), \
+ AD7266_CHAN(8, (_sign)), \
+ AD7266_CHAN(9, (_sign)), \
+ AD7266_CHAN(10, (_sign)), \
+ AD7266_CHAN(11, (_sign)), \
+};
+
+static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(u, 'u');
+static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(s, 's');
+
+#define AD7266_CHAN_DIFF(_chan) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan) * 2, \
+ .channel2 = (_chan) * 2 + 1, \
+ .address = (_chan), \
+ .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+ .scan_index = (_chan), \
+ .scan_type = IIO_ST('s', 12, 16, 2), \
+ .differential = 1, \
+}
+
+static const struct iio_chan_spec ad7266_channels_diff[] = {
+ AD7266_CHAN_DIFF(0),
+ AD7266_CHAN_DIFF(1),
+ AD7266_CHAN_DIFF(2),
+ AD7266_CHAN_DIFF(3),
+ AD7266_CHAN_DIFF(4),
+ AD7266_CHAN_DIFF(5),
+};
+
+static const struct iio_info ad7266_info = {
+ .read_raw = &ad7266_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static unsigned long ad7266_available_scan_masks[] = {
+ 0x003,
+ 0x00c,
+ 0x030,
+ 0x0c0,
+ 0x300,
+ 0xc00,
+ 0x000,
+};
+
+static unsigned long ad7266_available_scan_masks_diff[] = {
+ 0x003,
+ 0x00c,
+ 0x030,
+ 0x000,
+};
+
+static unsigned long ad7266_available_scan_masks_fixed[] = {
+ 0x003,
+ 0x000,
+};
+
+static const char * const ad7266_gpio_labels[] = {
+ "AD0", "AD1", "AD2",
+};
+
+static int __devinit ad7266_probe(struct spi_device *spi)
+{
+ struct ad7266_platform_data *pdata = spi->dev.platform_data;
+ struct iio_dev *indio_dev;
+ unsigned long *scan_masks;
+ struct ad7266_state *st;
+ unsigned int i;
+ int ret;
+
+ indio_dev = iio_allocate_device(sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ st->reg = regulator_get(&spi->dev, "vref");
+ if (!IS_ERR_OR_NULL(st->reg)) {
+ ret = regulator_enable(st->reg);
+ if (ret)
+ goto error_put_reg;
+
+ st->vref_uv = regulator_get_voltage(st->reg);
+ } else {
+ /* Use internal reference */
+ st->vref_uv = 2500000;
+ }
+
+ if (pdata) {
+ st->fixed_addr = pdata->fixed_addr;
+ st->mode = pdata->mode;
+ st->range = pdata->range;
+
+ if (!st->fixed_addr) {
+ for (i = 0; i < ARRAY_SIZE(st->gpios); ++i) {
+ st->gpios[i].gpio = pdata->addr_gpios[i];
+ st->gpios[i].flags = GPIOF_OUT_INIT_LOW;
+ st->gpios[i].label = ad7266_gpio_labels[i];
+ }
+ ret = gpio_request_array(st->gpios,
+ ARRAY_SIZE(st->gpios));
+ if (ret)
+ goto error_disable_reg;
+ }
+ } else {
+ st->fixed_addr = true;
+ st->range = AD7266_RANGE_VREF;
+ st->mode = AD7266_MODE_DIFF;
+ }
+
+ spi_set_drvdata(spi, indio_dev);
+ st->spi = spi;
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &ad7266_info;
+
+ if (st->mode == AD7266_MODE_SINGLE_ENDED) {
+ if (st->range == AD7266_RANGE_VREF) {
+ indio_dev->channels = ad7266_channels_u;
+ indio_dev->num_channels = ARRAY_SIZE(ad7266_channels_u);
+ } else {
+ indio_dev->channels = ad7266_channels_s;
+ indio_dev->num_channels = ARRAY_SIZE(ad7266_channels_s);
+ }
+ scan_masks = ad7266_available_scan_masks;
+ } else {
+ indio_dev->channels = ad7266_channels_diff;
+ indio_dev->num_channels = ARRAY_SIZE(ad7266_channels_diff);
+ scan_masks = ad7266_available_scan_masks_diff;
+ }
+
+ if (!st->fixed_addr) {
+ indio_dev->available_scan_masks = scan_masks;
+ indio_dev->masklength = indio_dev->num_channels;
+ } else {
+ indio_dev->available_scan_masks = ad7266_available_scan_masks_fixed;
+ indio_dev->masklength = 2;
+ indio_dev->num_channels = 2;
+ }
+
+ /* wakeup */
+ st->single_xfer[0].rx_buf = &st->data;
+ st->single_xfer[0].len = 2;
+ st->single_xfer[0].cs_change = 1;
+ /* conversion */
+ st->single_xfer[1].rx_buf = &st->data;
+ st->single_xfer[1].len = 4;
+ st->single_xfer[1].cs_change = 1;
+ /* powerdown */
+ st->single_xfer[2].tx_buf = &st->data;
+ st->single_xfer[2].len = 1;
+
+ spi_message_init(&st->single_msg);
+ spi_message_add_tail(&st->single_xfer[0], &st->single_msg);
+ spi_message_add_tail(&st->single_xfer[1], &st->single_msg);
+ spi_message_add_tail(&st->single_xfer[2], &st->single_msg);
+
+ ret = iio_sw_rb_simple_setup(indio_dev, &iio_pollfunc_store_time,
+ &ad7266_trigger_handler);
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_free_gpios;
+
+ return 0;
+
+error_free_gpios:
+ gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
+error_disable_reg:
+ if (!IS_ERR_OR_NULL(st->reg))
+ regulator_disable(st->reg);
+error_put_reg:
+ if (!IS_ERR_OR_NULL(st->reg))
+ regulator_put(st->reg);
+
+ iio_free_device(indio_dev);
+
+ return ret;
+}
+
+static int __devexit ad7266_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ad7266_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
+ if (!IS_ERR_OR_NULL(st->reg)) {
+ regulator_disable(st->reg);
+ regulator_put(st->reg);
+ }
+ iio_free_device(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ad7266_id[] = {
+ {"ad7265", 0},
+ {"ad7266", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ad7266_id);
+
+static struct spi_driver ad7266_driver = {
+ .driver = {
+ .name = "ad7266",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7266_probe,
+ .remove = __devexit_p(ad7266_remove),
+ .id_table = ad7266_id,
+};
+
+static int __init ad7266_init(void)
+{
+ return spi_register_driver(&ad7266_driver);
+}
+module_init(ad7266_init);
+
+static void __exit ad7266_exit(void)
+{
+ spi_unregister_driver(&ad7266_driver);
+}
+module_exit(ad7266_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD7266/65 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7266.h b/drivers/staging/iio/adc/ad7266.h
new file mode 100644
index 0000000..dd96be7
--- /dev/null
+++ b/drivers/staging/iio/adc/ad7266.h
@@ -0,0 +1,54 @@
+/*
+ * AD7266/65 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __IIO_ADC_AD7266_H__
+#define __IIO_ADC_AD7266_H__
+
+/*
+ * ad7266_range - AD7266 reference voltage range
+ * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF
+ * (RANGE pin set to low)
+ * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF
+ * (RANGE pin set to high)
+ */
+enum ad7266_range {
+ AD7266_RANGE_VREF,
+ AD7266_RANGE_2VREF,
+};
+
+/*
+ * ad7266_mode - AD7266 sample mode
+ * @AD7266_MODE_DIFF: Device is configured for full differntial mode
+ * (SGL/DIFF pin set to low, AD0 pin set to low)
+ * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode
+ * (SGL/DIFF pin set to low, AD0 pin set to high)
+ * @AD7266_MODE_SINGLE_ENDED: Device is configured for signle-ended mode
+ * (SGL/DIFF pin set to high)
+ */
+enum ad7266_mode {
+ AD7266_MODE_DIFF,
+ AD7266_MODE_PSEUDO_DIFF,
+ AD7266_MODE_SINGLE_ENDED,
+};
+
+/*
+ * ad7266_platform_data - Platform data for the AD7266 driver
+ * @range: Reference voltage range the device is configuired for
+ * @mode: Sample mode the device is configured for
+ * @fixed_addr: Whether the AD pins are hard-wired
+ * @addr_gpios: GPIOs used for controlling the AD pins, only valid if fixed_addr
+ * is set to false.
+ */
+struct ad7266_platform_data {
+ enum ad7266_range range;
+ enum ad7266_mode mode;
+ bool fixed_addr;
+ unsigned int addr_gpios[3];
+};
+
+#endif
--
1.7.7.3
next reply other threads:[~2011-12-08 8:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-08 8:44 Lars-Peter Clausen [this message]
2011-12-10 13:59 ` [PATCH] staging:iio:adc: Add AD7265/AD7266 support Jonathan Cameron
2011-12-11 16:54 ` Lars-Peter Clausen
2011-12-12 21:02 ` Jonathan Cameron
2011-12-12 21:17 ` Lars-Peter Clausen
2011-12-14 20:06 ` Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2012-06-18 17:14 Lars-Peter Clausen
2012-06-21 14:16 ` Jonathan Cameron
2012-06-21 15:41 ` Lars-Peter Clausen
2012-06-22 7:32 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323333852-4975-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=device-drivers-devel@blackfin.uclinux.org \
--cc=drivers@analog.com \
--cc=jic23@cam.ac.uk \
--cc=linux-iio@vger.kernel.org \
--cc=michael.hennerich@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).