From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org
Cc: lars@metafoo.de, Jonathan Cameron <jic23@kernel.org>
Subject: [PATCH 10/14] staging:iio:adc:ad799x use iio_sw_buffer_preenable to avoid code repitiion
Date: Wed, 18 Apr 2012 14:13:50 +0100 [thread overview]
Message-ID: <1334754834-13622-11-git-send-email-jic23@kernel.org> (raw)
In-Reply-To: <1334754834-13622-1-git-send-email-jic23@kernel.org>
Using this generic function cuts down on repeated code at the cost of
a little overhead in a slow path.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
---
drivers/staging/iio/adc/ad799x.h | 1 -
drivers/staging/iio/adc/ad799x_ring.c | 22 +++-------------------
2 files changed, 3 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
index 356f690..99f8abe 100644
--- a/drivers/staging/iio/adc/ad799x.h
+++ b/drivers/staging/iio/adc/ad799x.h
@@ -104,7 +104,6 @@ struct ad799x_chip_info {
struct ad799x_state {
struct i2c_client *client;
const struct ad799x_chip_info *chip_info;
- size_t d_size;
struct iio_trigger *trig;
struct regulator *reg;
u16 int_vref_mv;
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 069765c..dfdbf92 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -32,9 +32,7 @@
**/
static int ad799x_ring_preenable(struct iio_dev *indio_dev)
{
- struct iio_buffer *ring = indio_dev->buffer;
struct ad799x_state *st = iio_priv(indio_dev);
-
/*
* Need to figure out the current mode based upon the requested
* scan mask in iio_dev
@@ -43,21 +41,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev)
if (st->id == ad7997 || st->id == ad7998)
ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask);
- st->d_size = bitmap_weight(indio_dev->active_scan_mask,
- indio_dev->masklength) * 2;
-
- if (ring->scan_timestamp) {
- st->d_size += sizeof(s64);
-
- if (st->d_size % sizeof(s64))
- st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
- }
-
- if (indio_dev->buffer->access->set_bytes_per_datum)
- indio_dev->buffer->access->
- set_bytes_per_datum(indio_dev->buffer, st->d_size);
-
- return 0;
+ return iio_sw_buffer_preenable(indio_dev);
}
/**
@@ -78,7 +62,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
int b_sent;
u8 cmd;
- rxbuf = kmalloc(st->d_size, GFP_KERNEL);
+ rxbuf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
if (rxbuf == NULL)
goto out;
@@ -112,7 +96,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
time_ns = iio_get_time_ns();
if (ring->scan_timestamp)
- memcpy(rxbuf + st->d_size - sizeof(s64),
+ memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
&time_ns, sizeof(time_ns));
ring->access->store_to(indio_dev->buffer, rxbuf, time_ns);
--
1.7.0.4
next prev parent reply other threads:[~2012-04-18 13:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 13:13 [PATCH 00/14] Staging:iio: Cleanup and refactor pre multibuffer Jonathan Cameron
2012-04-18 13:13 ` [PATCH 01/14] staging:iio:buffer trivial use of strtobool to remove dodgy equivalent Jonathan Cameron
2012-04-18 13:13 ` [PATCH 02/14] staging:iio:buffer: pull computation of scan length into a utility function Jonathan Cameron
2012-04-18 13:13 ` [PATCH 03/14] staging:iio: scan_index_timestamp move to iio_dev from buffer Jonathan Cameron
2012-04-18 13:13 ` [PATCH 04/14] staging:iio: add caching of the number of bytes in a scan Jonathan Cameron
[not found] ` <4F91944F.3070701@metafoo.de>
2012-04-20 17:02 ` Jonathan Cameron
2012-04-18 13:13 ` [PATCH 05/14] staging:iio:adc:ad7192 make use of iio_sw_buffer_preenable Jonathan Cameron
2012-04-18 13:13 ` [PATCH 06/14] staging:iio:adc:ad7298 use iio_sw_buffer_preenable to avoid code repitition Jonathan Cameron
2012-04-18 13:13 ` [PATCH 07/14] staging:iio:adc:ad7476 use iio_sw_buffer_preenable instead of local version Jonathan Cameron
2012-04-18 13:13 ` [PATCH 08/14] staging:iio:adc:ad7793 use iio_sw_buffer_preenable to avoid repitition Jonathan Cameron
2012-04-18 13:13 ` [PATCH 09/14] staging:iio:adc:ad7887 make use of iio_sw_buffer_preenable Jonathan Cameron
2012-04-18 13:13 ` Jonathan Cameron [this message]
2012-04-18 13:13 ` [PATCH 11/14] staging:iio:meter:ad7758 use iio_sw_buffer_preenable to avoid code repition Jonathan Cameron
2012-04-18 13:13 ` [PATCH 12/14] staging:iio:impedance-analyser make use of iio_sw_buffer_preenable Jonathan Cameron
2012-04-18 13:13 ` [PATCH 13/14] staging:iio: Add caching of scan_timestamp to the core as well as buffers Jonathan Cameron
2012-04-18 13:13 ` [PATCH 14/14] staging:iio: pull out demux cleanup for a particular buffer Jonathan Cameron
[not found] ` <4F919648.2070503@metafoo.de>
2012-04-21 9:10 ` [PATCH 00/14] Staging:iio: Cleanup and refactor pre multibuffer Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334754834-13622-11-git-send-email-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).