From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ppsw-41.csi.cam.ac.uk ([131.111.8.141]:43707 "EHLO ppsw-41.csi.cam.ac.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751730Ab2DYOzH (ORCPT ); Wed, 25 Apr 2012 10:55:07 -0400 From: Jonathan Cameron To: gregkh@linuxfoundation.org Cc: linux-iio@vger.kernel.org, Jonathan Cameron Subject: [PATCH 2/5] staging:iio:Documentation Trivial typo fixes. Date: Wed, 25 Apr 2012 15:54:57 +0100 Message-Id: <1335365700-1138-3-git-send-email-jic23@kernel.org> In-Reply-To: <1335365700-1138-1-git-send-email-jic23@kernel.org> References: <1335365700-1138-1-git-send-email-jic23@kernel.org> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org Just a couple of things I came across whilst reviewing this file for moving out of staging. I doubt anyone cares, but seemed sensible to fix them now! Signed-off-by: Jonathan Cameron --- drivers/staging/iio/Documentation/sysfs-bus-iio | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio index f7de494..2ce4dad 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio @@ -108,7 +108,7 @@ Description: physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application - of scale and offset are nanofarads.. + of scale and offset are nanofarads. What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw @@ -119,7 +119,7 @@ KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc) temperature measurement. - It an axis is specified it generally means that the temperature + If an axis is specified it generally means that the temperature sensor is associated with one part of a compound device (e.g. a gyroscope axis). Units after application of scale and offset are milli degrees Celsuis. @@ -232,7 +232,7 @@ Description: If known for a device, scale to be applied to Y[_name]_raw post addition of [Y][_name]_offset in order to obtain the measured value in units as specified in - [Y][_name]_raw documentation.. If shared across all in + [Y][_name]_raw documentation. If shared across all in channels then Y and are not present and the value is called [Y][_name]_scale. The peak modifier means this value is applied to Y[_name]_peak_raw values. -- 1.7.0.4