* [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver
@ 2012-12-30 23:26 Peter Meerwald
2012-12-30 23:26 ` [PATCH 2/2] iio: max1363 comment and whitespace fixes Peter Meerwald
2013-01-01 17:42 ` [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Jonathan Cameron
0 siblings, 2 replies; 4+ messages in thread
From: Peter Meerwald @ 2012-12-30 23:26 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio, Peter Meerwald
use iio_triggered_buffer_setup(), iio_triggered_buffer_cleanup()
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
drivers/iio/adc/max1363.c | 59 ++++-----------------------------------------
1 file changed, 5 insertions(+), 54 deletions(-)
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 1e84b5b..46d8365 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -39,6 +39,7 @@
#include <linux/iio/driver.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
@@ -1483,48 +1484,6 @@ static const struct iio_buffer_setup_ops max1363_buffered_setup_ops = {
.predisable = &iio_triggered_buffer_predisable,
};
-static int max1363_register_buffered_funcs_and_init(struct iio_dev *indio_dev)
-{
- struct max1363_state *st = iio_priv(indio_dev);
- int ret = 0;
-
- indio_dev->buffer = iio_kfifo_allocate(indio_dev);
- if (!indio_dev->buffer) {
- ret = -ENOMEM;
- goto error_ret;
- }
- indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
- &max1363_trigger_handler,
- IRQF_ONESHOT,
- indio_dev,
- "%s_consumer%d",
- st->client->name,
- indio_dev->id);
- if (indio_dev->pollfunc == NULL) {
- ret = -ENOMEM;
- goto error_deallocate_sw_rb;
- }
- /* Buffer functions - here trigger setup related */
- indio_dev->setup_ops = &max1363_buffered_setup_ops;
-
- /* Flag that polled buffering is possible */
- indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
-
- return 0;
-
-error_deallocate_sw_rb:
- iio_kfifo_free(indio_dev->buffer);
-error_ret:
- return ret;
-}
-
-static void max1363_buffer_cleanup(struct iio_dev *indio_dev)
-{
- /* ensure that the trigger has been detached */
- iio_dealloc_pollfunc(indio_dev->pollfunc);
- iio_kfifo_free(indio_dev->buffer);
-}
-
static int __devinit max1363_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1577,16 +1536,11 @@ static int __devinit max1363_probe(struct i2c_client *client,
if (ret < 0)
goto error_free_available_scan_masks;
- ret = max1363_register_buffered_funcs_and_init(indio_dev);
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ &max1363_trigger_handler, &max1363_buffered_setup_ops);
if (ret)
goto error_free_available_scan_masks;
- ret = iio_buffer_register(indio_dev,
- st->chip_info->channels,
- st->chip_info->num_channels);
- if (ret)
- goto error_cleanup_buffer;
-
if (client->irq) {
ret = request_threaded_irq(st->client->irq,
NULL,
@@ -1607,9 +1561,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
error_free_irq:
free_irq(st->client->irq, indio_dev);
error_uninit_buffer:
- iio_buffer_unregister(indio_dev);
-error_cleanup_buffer:
- max1363_buffer_cleanup(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
error_free_available_scan_masks:
kfree(indio_dev->available_scan_masks);
error_unregister_map:
@@ -1632,8 +1584,7 @@ static int __devexit max1363_remove(struct i2c_client *client)
iio_device_unregister(indio_dev);
if (client->irq)
free_irq(st->client->irq, indio_dev);
- iio_buffer_unregister(indio_dev);
- max1363_buffer_cleanup(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->available_scan_masks);
if (!IS_ERR(st->reg)) {
regulator_disable(st->reg);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] iio: max1363 comment and whitespace fixes
2012-12-30 23:26 [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Peter Meerwald
@ 2012-12-30 23:26 ` Peter Meerwald
2013-01-01 17:43 ` Jonathan Cameron
2013-01-01 17:42 ` [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Jonathan Cameron
1 sibling, 1 reply; 4+ messages in thread
From: Peter Meerwald @ 2012-12-30 23:26 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio, Peter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
drivers/iio/adc/max1363.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 46d8365..0ba4fea 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -56,7 +56,7 @@
#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
-/* think about includeing max11600 etc - more settings */
+/* think about including max11600 etc - more settings */
#define MAX1363_SETUP_EXT_CLOCK 0x08
#define MAX1363_SETUP_INT_CLOCK 0x00
#define MAX1363_SETUP_UNIPOLAR 0x00
@@ -87,7 +87,7 @@
/* max123{6-9} only */
#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
-/* max1363 only - merely part of channel selects or don't care for others*/
+/* max1363 only - merely part of channel selects or don't care for others */
#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
@@ -134,7 +134,7 @@ enum max1363_modes {
* @mode_list: array of available scan modes
* @default_mode: the scan mode in which the chip starts up
* @int_vref_mv: the internal reference voltage
- * @num_channels: number of channels
+ * @num_modes: number of modes
* @bits: accuracy of the adc in bits
*/
struct max1363_chip_info {
@@ -153,7 +153,7 @@ struct max1363_chip_info {
* @client: i2c_client
* @setupbyte: cache of current device setup byte
* @configbyte: cache of current device config byte
- * @chip_info: chip model specific constants, available modes etc
+ * @chip_info: chip model specific constants, available modes, etc.
* @current_mode: the scan mode of this chip
* @requestedmask: a valid requested set of channels
* @reg: supply regulator
@@ -294,7 +294,7 @@ static const struct max1363_mode max1363_mode_table[] = {
static const struct max1363_mode
*max1363_match_mode(const unsigned long *mask,
-const struct max1363_chip_info *ci)
+ const struct max1363_chip_info *ci)
{
int i;
if (mask)
@@ -1395,7 +1395,7 @@ static int max1363_initial_setup(struct max1363_state *st)
| MAX1363_SETUP_UNIPOLAR
| MAX1363_SETUP_NORESET;
- /* Set scan mode writes the config anyway so wait until then*/
+ /* Set scan mode writes the config anyway so wait until then */
st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
@@ -1424,7 +1424,6 @@ static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev)
return 0;
}
-
static irqreturn_t max1363_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
@@ -1523,7 +1522,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
if (ret)
goto error_disable_reg;
- /* Estabilish that the iio_dev is a child of the i2c device */
+ /* Establish that the iio_dev is a child of the i2c device */
indio_dev->dev.parent = &client->dev;
indio_dev->name = id->name;
indio_dev->channels = st->chip_info->channels;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 2/2] iio: max1363 comment and whitespace fixes
2012-12-30 23:26 ` [PATCH 2/2] iio: max1363 comment and whitespace fixes Peter Meerwald
@ 2013-01-01 17:43 ` Jonathan Cameron
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2013-01-01 17:43 UTC (permalink / raw)
To: Peter Meerwald; +Cc: linux-iio
On 12/30/2012 11:26 PM, Peter Meerwald wrote:
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Applied to togreg branch of iio.git
Thanks,
> ---
> drivers/iio/adc/max1363.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index 46d8365..0ba4fea 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -56,7 +56,7 @@
> #define MAX1363_SETUP_POWER_UP_INT_REF 0x10
> #define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
>
> -/* think about includeing max11600 etc - more settings */
> +/* think about including max11600 etc - more settings */
> #define MAX1363_SETUP_EXT_CLOCK 0x08
> #define MAX1363_SETUP_INT_CLOCK 0x00
> #define MAX1363_SETUP_UNIPOLAR 0x00
> @@ -87,7 +87,7 @@
> /* max123{6-9} only */
> #define MAX1236_SCAN_MID_TO_CHANNEL 0x40
>
> -/* max1363 only - merely part of channel selects or don't care for others*/
> +/* max1363 only - merely part of channel selects or don't care for others */
> #define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
>
> #define MAX1363_CHANNEL_SEL(a) ((a) << 1)
> @@ -134,7 +134,7 @@ enum max1363_modes {
> * @mode_list: array of available scan modes
> * @default_mode: the scan mode in which the chip starts up
> * @int_vref_mv: the internal reference voltage
> - * @num_channels: number of channels
> + * @num_modes: number of modes
> * @bits: accuracy of the adc in bits
> */
> struct max1363_chip_info {
> @@ -153,7 +153,7 @@ struct max1363_chip_info {
> * @client: i2c_client
> * @setupbyte: cache of current device setup byte
> * @configbyte: cache of current device config byte
> - * @chip_info: chip model specific constants, available modes etc
> + * @chip_info: chip model specific constants, available modes, etc.
> * @current_mode: the scan mode of this chip
> * @requestedmask: a valid requested set of channels
> * @reg: supply regulator
> @@ -294,7 +294,7 @@ static const struct max1363_mode max1363_mode_table[] = {
>
> static const struct max1363_mode
> *max1363_match_mode(const unsigned long *mask,
> -const struct max1363_chip_info *ci)
> + const struct max1363_chip_info *ci)
> {
> int i;
> if (mask)
> @@ -1395,7 +1395,7 @@ static int max1363_initial_setup(struct max1363_state *st)
> | MAX1363_SETUP_UNIPOLAR
> | MAX1363_SETUP_NORESET;
>
> - /* Set scan mode writes the config anyway so wait until then*/
> + /* Set scan mode writes the config anyway so wait until then */
> st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
> st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
> st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
> @@ -1424,7 +1424,6 @@ static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev)
> return 0;
> }
>
> -
> static irqreturn_t max1363_trigger_handler(int irq, void *p)
> {
> struct iio_poll_func *pf = p;
> @@ -1523,7 +1522,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
> if (ret)
> goto error_disable_reg;
>
> - /* Estabilish that the iio_dev is a child of the i2c device */
> + /* Establish that the iio_dev is a child of the i2c device */
> indio_dev->dev.parent = &client->dev;
> indio_dev->name = id->name;
> indio_dev->channels = st->chip_info->channels;
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver
2012-12-30 23:26 [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Peter Meerwald
2012-12-30 23:26 ` [PATCH 2/2] iio: max1363 comment and whitespace fixes Peter Meerwald
@ 2013-01-01 17:42 ` Jonathan Cameron
1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2013-01-01 17:42 UTC (permalink / raw)
To: Peter Meerwald; +Cc: linux-iio
On 12/30/2012 11:26 PM, Peter Meerwald wrote:
> use iio_triggered_buffer_setup(), iio_triggered_buffer_cleanup()
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Hi Peter,
Thanks for this. Been meaning to do this myself, but never quite
got around to it. Now I don't have to ;)
Added to togreg branch of iio.git
> ---
> drivers/iio/adc/max1363.c | 59 ++++-----------------------------------------
> 1 file changed, 5 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index 1e84b5b..46d8365 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -39,6 +39,7 @@
> #include <linux/iio/driver.h>
> #include <linux/iio/kfifo_buf.h>
> #include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
>
> #define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
>
> @@ -1483,48 +1484,6 @@ static const struct iio_buffer_setup_ops max1363_buffered_setup_ops = {
> .predisable = &iio_triggered_buffer_predisable,
> };
>
> -static int max1363_register_buffered_funcs_and_init(struct iio_dev *indio_dev)
> -{
> - struct max1363_state *st = iio_priv(indio_dev);
> - int ret = 0;
> -
> - indio_dev->buffer = iio_kfifo_allocate(indio_dev);
> - if (!indio_dev->buffer) {
> - ret = -ENOMEM;
> - goto error_ret;
> - }
> - indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
> - &max1363_trigger_handler,
> - IRQF_ONESHOT,
> - indio_dev,
> - "%s_consumer%d",
> - st->client->name,
> - indio_dev->id);
> - if (indio_dev->pollfunc == NULL) {
> - ret = -ENOMEM;
> - goto error_deallocate_sw_rb;
> - }
> - /* Buffer functions - here trigger setup related */
> - indio_dev->setup_ops = &max1363_buffered_setup_ops;
> -
> - /* Flag that polled buffering is possible */
> - indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
> -
> - return 0;
> -
> -error_deallocate_sw_rb:
> - iio_kfifo_free(indio_dev->buffer);
> -error_ret:
> - return ret;
> -}
> -
> -static void max1363_buffer_cleanup(struct iio_dev *indio_dev)
> -{
> - /* ensure that the trigger has been detached */
> - iio_dealloc_pollfunc(indio_dev->pollfunc);
> - iio_kfifo_free(indio_dev->buffer);
> -}
> -
> static int __devinit max1363_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1577,16 +1536,11 @@ static int __devinit max1363_probe(struct i2c_client *client,
> if (ret < 0)
> goto error_free_available_scan_masks;
>
> - ret = max1363_register_buffered_funcs_and_init(indio_dev);
> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> + &max1363_trigger_handler, &max1363_buffered_setup_ops);
> if (ret)
> goto error_free_available_scan_masks;
>
> - ret = iio_buffer_register(indio_dev,
> - st->chip_info->channels,
> - st->chip_info->num_channels);
> - if (ret)
> - goto error_cleanup_buffer;
> -
> if (client->irq) {
> ret = request_threaded_irq(st->client->irq,
> NULL,
> @@ -1607,9 +1561,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
> error_free_irq:
> free_irq(st->client->irq, indio_dev);
> error_uninit_buffer:
> - iio_buffer_unregister(indio_dev);
> -error_cleanup_buffer:
> - max1363_buffer_cleanup(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
> error_free_available_scan_masks:
> kfree(indio_dev->available_scan_masks);
> error_unregister_map:
> @@ -1632,8 +1584,7 @@ static int __devexit max1363_remove(struct i2c_client *client)
> iio_device_unregister(indio_dev);
> if (client->irq)
> free_irq(st->client->irq, indio_dev);
> - iio_buffer_unregister(indio_dev);
> - max1363_buffer_cleanup(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
> kfree(indio_dev->available_scan_masks);
> if (!IS_ERR(st->reg)) {
> regulator_disable(st->reg);
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-01-01 17:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-30 23:26 [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Peter Meerwald
2012-12-30 23:26 ` [PATCH 2/2] iio: max1363 comment and whitespace fixes Peter Meerwald
2013-01-01 17:43 ` Jonathan Cameron
2013-01-01 17:42 ` [PATCH 1/2] iio: cleanup buffer setup code in max1363 driver Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).