From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp-out-052.synserver.de ([212.40.185.52]:1059 "EHLO smtp-out-052.synserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757803Ab3AIOAo (ORCPT ); Wed, 9 Jan 2013 09:00:44 -0500 From: Lars-Peter Clausen To: Jonathan Cameron Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen Subject: [PATCH 2/7] staging:iio:adis16080: Add device id table entry for the adis16100 Date: Wed, 9 Jan 2013 15:01:14 +0100 Message-Id: <1357740079-12326-2-git-send-email-lars@metafoo.de> In-Reply-To: <1357740079-12326-1-git-send-email-lars@metafoo.de> References: <1357740079-12326-1-git-send-email-lars@metafoo.de> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org The adis16100 is very similar to the adis16080. The driver description already states that the driver supports the adis16100 as-well. But so far the there is no device id table for the adis16100 and the drivers does not bind to a device named adis16100. Signed-off-by: Lars-Peter Clausen --- drivers/staging/iio/gyro/Kconfig | 4 ++-- drivers/staging/iio/gyro/adis16080_core.c | 9 ++++++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig index ea295b2..2f9467e 100644 --- a/drivers/staging/iio/gyro/Kconfig +++ b/drivers/staging/iio/gyro/Kconfig @@ -14,8 +14,8 @@ config ADIS16080 tristate "Analog Devices ADIS16080/100 Yaw Rate Gyroscope with SPI driver" depends on SPI help - Say yes here to build support for Analog Devices adis16080/100 Yaw Rate - Gyroscope with SPI. + Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw + Rate Gyroscope with SPI. config ADIS16130 tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver" diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 149ff99..0268f2a 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -185,6 +185,13 @@ static int adis16080_remove(struct spi_device *spi) return 0; } +static const struct spi_device_id adis16080_ids[] = { + { "adis16080", 0 }, + { "adis16100", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(spi, adis16080_ids); + static struct spi_driver adis16080_driver = { .driver = { .name = "adis16080", @@ -192,10 +199,10 @@ static struct spi_driver adis16080_driver = { }, .probe = adis16080_probe, .remove = adis16080_remove, + .id_table = adis16080_ids, }; module_spi_driver(adis16080_driver); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("spi:adis16080"); -- 1.8.0