Linux IIO development
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: linux-iio@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>
Cc: devicetree-discuss@lists.ozlabs.org,
	Naveen Krishna Chatradhi <ch.naveen@samsung.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Doug Anderson <dianders@chromium.org>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	Rob Herring <rob.herring@calxeda.com>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 1/4] iio: max1363: Use devm_ functions whereever possible to allocate resources
Date: Sat,  2 Feb 2013 16:59:37 -0800	[thread overview]
Message-ID: <1359853180-5664-2-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1359853180-5664-1-git-send-email-linux@roeck-us.net>

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/iio/adc/max1363.c |   29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index ef868c9..1353fda 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1410,8 +1410,9 @@ static int max1363_alloc_scan_masks(struct iio_dev *indio_dev)
 	unsigned long *masks;
 	int i;
 
-	masks = kzalloc(BITS_TO_LONGS(MAX1363_MAX_CHANNELS)*sizeof(long)*
-			  (st->chip_info->num_modes + 1), GFP_KERNEL);
+	masks = devm_kzalloc(&indio_dev->dev,
+			BITS_TO_LONGS(MAX1363_MAX_CHANNELS) * sizeof(long) *
+			(st->chip_info->num_modes + 1), GFP_KERNEL);
 	if (!masks)
 		return -ENOMEM;
 
@@ -1546,7 +1547,7 @@ static int max1363_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
-	st->reg = regulator_get(&client->dev, "vcc");
+	st->reg = devm_regulator_get(&client->dev, "vcc");
 	if (IS_ERR(st->reg)) {
 		ret = PTR_ERR(st->reg);
 		goto error_unregister_map;
@@ -1554,7 +1555,7 @@ static int max1363_probe(struct i2c_client *client,
 
 	ret = regulator_enable(st->reg);
 	if (ret)
-		goto error_put_reg;
+		goto error_unregister_map;
 
 	/* this is only used for device removal purposes */
 	i2c_set_clientdata(client, indio_dev);
@@ -1575,15 +1576,15 @@ static int max1363_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	ret = max1363_initial_setup(st);
 	if (ret < 0)
-		goto error_free_available_scan_masks;
+		goto error_disable_reg;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
 		&max1363_trigger_handler, &max1363_buffered_setup_ops);
 	if (ret)
-		goto error_free_available_scan_masks;
+		goto error_disable_reg;
 
 	if (client->irq) {
-		ret = request_threaded_irq(st->client->irq,
+		ret = devm_request_threaded_irq(&client->dev, st->client->irq,
 					   NULL,
 					   &max1363_event_handler,
 					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -1596,20 +1597,14 @@ static int max1363_probe(struct i2c_client *client,
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
-		goto error_free_irq;
+		goto error_uninit_buffer;
 
 	return 0;
-error_free_irq:
-	if (client->irq)
-		free_irq(st->client->irq, indio_dev);
+
 error_uninit_buffer:
 	iio_triggered_buffer_cleanup(indio_dev);
-error_free_available_scan_masks:
-	kfree(indio_dev->available_scan_masks);
 error_disable_reg:
 	regulator_disable(st->reg);
-error_put_reg:
-	regulator_put(st->reg);
 error_unregister_map:
 	iio_map_array_unregister(indio_dev);
 error_free_device:
@@ -1624,12 +1619,8 @@ static int max1363_remove(struct i2c_client *client)
 	struct max1363_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (client->irq)
-		free_irq(st->client->irq, indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
-	kfree(indio_dev->available_scan_masks);
 	regulator_disable(st->reg);
-	regulator_put(st->reg);
 	iio_map_array_unregister(indio_dev);
 	iio_device_free(indio_dev);
 
-- 
1.7.9.7


  reply	other threads:[~2013-02-03  0:59 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-03  0:59 [RFC v2 0/4] iio: Devicetree support Guenter Roeck
2013-02-03  0:59 ` Guenter Roeck [this message]
2013-02-03 12:10   ` [PATCH 1/4] iio: max1363: Use devm_ functions whereever possible to allocate resources Jonathan Cameron
2013-02-03 17:18     ` Guenter Roeck
2013-02-03 18:02       ` Jonathan Cameron
2013-02-03 18:16         ` Guenter Roeck
2013-02-03  0:59 ` [PATCH v2 2/4] iio/adc: (max1363) Add support for external reference voltage Guenter Roeck
2013-02-03 12:12   ` Jonathan Cameron
2013-02-03  0:59 ` [PATCH RFC 3/4] iio: Update iio_channel_get API to use consumer device pointer as argument Guenter Roeck
2013-02-03  0:59 ` [PATCH v2 4/4] iio: Add OF support Guenter Roeck
2013-02-03  1:30   ` Tomasz Figa
2013-02-03  2:06     ` Guenter Roeck
2013-02-03 11:29       ` Lars-Peter Clausen
2013-02-03 11:52         ` Tomasz Figa
2013-02-03 12:22           ` Lars-Peter Clausen
2013-02-03 17:01           ` Guenter Roeck
2013-02-03 17:30             ` Tomasz Figa
2013-02-03 18:55               ` Lars-Peter Clausen
2013-02-03 20:58                 ` Jonathan Cameron
2013-02-03 22:44                   ` Lars-Peter Clausen
2013-02-03 23:14                 ` Tomasz Figa
2013-02-04 17:12                   ` Guenter Roeck
2013-02-04 17:41                     ` Lars-Peter Clausen
2013-02-04 17:51                     ` Guenter Roeck
2013-02-04 18:00                       ` Tomasz Figa
2013-02-04 18:09                         ` Guenter Roeck
2013-02-03 16:31         ` Guenter Roeck
2013-02-03 19:00           ` Lars-Peter Clausen
2013-02-03 14:17   ` Lars-Peter Clausen
2013-02-03 16:22     ` Guenter Roeck
2013-02-04 16:37       ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359853180-5664-2-git-send-email-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=ch.naveen@samsung.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dianders@chromium.org \
    --cc=grant.likely@secretlab.ca \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox