From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH 3/4] staging:iio:ade7xxx: Don't expose the chip reset to userspace
Date: Tue, 16 Jul 2013 17:08:02 +0200 [thread overview]
Message-ID: <1373987283-32657-3-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1373987283-32657-1-git-send-email-lars@metafoo.de>
There is no reason why userspace should want to trigger a manual reset of the
device, so remove this functionality.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/staging/iio/meter/ade7753.c | 18 ------------------
drivers/staging/iio/meter/ade7754.c | 19 -------------------
drivers/staging/iio/meter/ade7758_core.c | 18 ------------------
drivers/staging/iio/meter/ade7759.c | 18 ------------------
drivers/staging/iio/meter/ade7854.c | 19 -------------------
5 files changed, 92 deletions(-)
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index e5943e2..74025fb 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -225,21 +225,6 @@ static int ade7753_reset(struct device *dev)
return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val);
}
-static ssize_t ade7753_write_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- if (len < 1)
- return -1;
- switch (buf[0]) {
- case '1':
- case 'y':
- case 'Y':
- return ade7753_reset(dev);
- }
- return -1;
-}
-
static IIO_DEV_ATTR_AENERGY(ade7753_read_24bit, ADE7753_AENERGY);
static IIO_DEV_ATTR_LAENERGY(ade7753_read_24bit, ADE7753_LAENERGY);
static IIO_DEV_ATTR_VAENERGY(ade7753_read_24bit, ADE7753_VAENERGY);
@@ -458,8 +443,6 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
ade7753_read_frequency,
ade7753_write_frequency);
-static IIO_DEV_ATTR_RESET(ade7753_write_reset);
-
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("27900 14000 7000 3500");
static struct attribute *ade7753_attributes[] = {
@@ -468,7 +451,6 @@ static struct attribute *ade7753_attributes[] = {
&iio_const_attr_in_temp_scale.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_reset.dev_attr.attr,
&iio_dev_attr_phcal.dev_attr.attr,
&iio_dev_attr_cfden.dev_attr.attr,
&iio_dev_attr_aenergy.dev_attr.attr,
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index 7b6503b..f649ebe 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -224,22 +224,6 @@ static int ade7754_reset(struct device *dev)
return ade7754_spi_write_reg_8(dev, ADE7754_OPMODE, val);
}
-
-static ssize_t ade7754_write_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- if (len < 1)
- return -1;
- switch (buf[0]) {
- case '1':
- case 'y':
- case 'Y':
- return ade7754_reset(dev);
- }
- return -1;
-}
-
static IIO_DEV_ATTR_AENERGY(ade7754_read_24bit, ADE7754_AENERGY);
static IIO_DEV_ATTR_LAENERGY(ade7754_read_24bit, ADE7754_LAENERGY);
static IIO_DEV_ATTR_VAENERGY(ade7754_read_24bit, ADE7754_VAENERGY);
@@ -478,8 +462,6 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
ade7754_read_frequency,
ade7754_write_frequency);
-static IIO_DEV_ATTR_RESET(ade7754_write_reset);
-
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("26000 13000 65000 33000");
static struct attribute *ade7754_attributes[] = {
@@ -488,7 +470,6 @@ static struct attribute *ade7754_attributes[] = {
&iio_const_attr_in_temp_scale.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_reset.dev_attr.attr,
&iio_dev_attr_aenergy.dev_attr.attr,
&iio_dev_attr_laenergy.dev_attr.attr,
&iio_dev_attr_vaenergy.dev_attr.attr,
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index 8f5bcfa..6005d4a 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -313,21 +313,6 @@ static int ade7758_reset(struct device *dev)
return ret;
}
-static ssize_t ade7758_write_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- if (len < 1)
- return -1;
- switch (buf[0]) {
- case '1':
- case 'y':
- case 'Y':
- return ade7758_reset(dev);
- }
- return len;
-}
-
static IIO_DEV_ATTR_VPEAK(S_IWUSR | S_IRUGO,
ade7758_read_8bit,
ade7758_write_8bit,
@@ -591,8 +576,6 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
ade7758_read_frequency,
ade7758_write_frequency);
-static IIO_DEV_ATTR_RESET(ade7758_write_reset);
-
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("26040 13020 6510 3255");
static struct attribute *ade7758_attributes[] = {
@@ -601,7 +584,6 @@ static struct attribute *ade7758_attributes[] = {
&iio_const_attr_in_temp_scale.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_reset.dev_attr.attr,
&iio_dev_attr_awatthr.dev_attr.attr,
&iio_dev_attr_bwatthr.dev_attr.attr,
&iio_dev_attr_cwatthr.dev_attr.attr,
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 17dc373..d214ac4 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -229,21 +229,6 @@ static int ade7759_reset(struct device *dev)
return ret;
}
-static ssize_t ade7759_write_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- if (len < 1)
- return -1;
- switch (buf[0]) {
- case '1':
- case 'y':
- case 'Y':
- return ade7759_reset(dev);
- }
- return -1;
-}
-
static IIO_DEV_ATTR_AENERGY(ade7759_read_40bit, ADE7759_AENERGY);
static IIO_DEV_ATTR_CFDEN(S_IWUSR | S_IRUGO,
ade7759_read_16bit,
@@ -418,8 +403,6 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
ade7759_read_frequency,
ade7759_write_frequency);
-static IIO_DEV_ATTR_RESET(ade7759_write_reset);
-
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("27900 14000 7000 3500");
static struct attribute *ade7759_attributes[] = {
@@ -428,7 +411,6 @@ static struct attribute *ade7759_attributes[] = {
&iio_const_attr_in_temp_scale.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_reset.dev_attr.attr,
&iio_dev_attr_phcal.dev_attr.attr,
&iio_dev_attr_cfden.dev_attr.attr,
&iio_dev_attr_aenergy.dev_attr.attr,
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index c642da8..e8379c0 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -186,22 +186,6 @@ static int ade7854_reset(struct device *dev)
return st->write_reg_16(dev, ADE7854_CONFIG, val);
}
-
-static ssize_t ade7854_write_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- if (len < 1)
- return -1;
- switch (buf[0]) {
- case '1':
- case 'y':
- case 'Y':
- return ade7854_reset(dev);
- }
- return -1;
-}
-
static IIO_DEV_ATTR_AIGAIN(S_IWUSR | S_IRUGO,
ade7854_read_24bit,
ade7854_write_24bit,
@@ -468,8 +452,6 @@ err_ret:
return ret;
}
-static IIO_DEV_ATTR_RESET(ade7854_write_reset);
-
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("8000");
static IIO_CONST_ATTR(name, "ade7854");
@@ -515,7 +497,6 @@ static struct attribute *ade7854_attributes[] = {
&iio_dev_attr_bvahr.dev_attr.attr,
&iio_dev_attr_cvahr.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_reset.dev_attr.attr,
&iio_const_attr_name.dev_attr.attr,
&iio_dev_attr_vpeak.dev_attr.attr,
&iio_dev_attr_ipeak.dev_attr.attr,
--
1.8.0
next prev parent reply other threads:[~2013-07-16 15:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-16 15:08 [PATCH 1/4] staging:iio:ad2s1210: Don't expose the chip reset to userspace Lars-Peter Clausen
2013-07-16 15:08 ` [PATCH 2/4] staging:iio:adt7316: " Lars-Peter Clausen
2013-07-16 16:57 ` Jonathan Cameron
2013-07-16 15:08 ` Lars-Peter Clausen [this message]
2013-07-16 16:57 ` [PATCH 3/4] staging:iio:ade7xxx: " Jonathan Cameron
2013-07-16 15:08 ` [PATCH 4/4] iio: Remove IIO_DEV_ATTR_RESET macro Lars-Peter Clausen
2013-07-16 16:57 ` Jonathan Cameron
2013-07-16 16:56 ` [PATCH 1/4] staging:iio:ad2s1210: Don't expose the chip reset to userspace Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373987283-32657-3-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@cam.ac.uk \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).