From: Peter Meerwald <pmeerw@pmeerw.net>
To: linux-iio@vger.kernel.org
Cc: jic23@kernel.org, Peter Meerwald <pmeerw@pmeerw.net>,
Jon Brenner <jon.brenner@ams.com>
Subject: [PATCH 3/4] iio: Add tsl4531 ambient light sensor driver
Date: Sun, 8 Sep 2013 17:20:58 +0200 [thread overview]
Message-ID: <1378653659-15665-4-git-send-email-pmeerw@pmeerw.net> (raw)
In-Reply-To: <1378653659-15665-1-git-send-email-pmeerw@pmeerw.net>
driver for the TSL4531 family of 16-bit I2C ambient light
sensors; information is here:
http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315
the chip offers simple lux output
v3 (thanks Lars-Peter Clausen):
* add mutex to when updating integration time
* fix chip ID checking
* code cleanups
v2:
* rename to tsl4351
* use INT_TIME
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Jon Brenner <jon.brenner@ams.com>
---
drivers/iio/light/Kconfig | 10 ++
drivers/iio/light/Makefile | 1 +
drivers/iio/light/tsl4531.c | 258 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 269 insertions(+)
create mode 100644 drivers/iio/light/tsl4531.c
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index bf9fa0d..488fff7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -65,6 +65,16 @@ config SENSORS_TSL2563
This driver can also be built as a module. If so, the module
will be called tsl2563.
+config TSL4531
+ tristate "TAOS TSL4531 ambient light sensors"
+ depends on I2C
+ help
+ Say Y here if you want to build a driver for the TAOS TSL4531 family
+ of ambient light sensors with direct lux output.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsl4531.
+
config VCNL4000
tristate "VCNL4000 combined ALS and proximity sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 354ee9a..cd6f3cf 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_APDS9300) += apds9300.o
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
+obj-$(CONFIG_TSL4531) += tsl4531.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
new file mode 100644
index 0000000..a15006e
--- /dev/null
+++ b/drivers/iio/light/tsl4531.c
@@ -0,0 +1,258 @@
+/*
+ * tsl4531.c - Support for TAOS TSL4531 ambient light sensor
+ *
+ * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for the TSL4531x family
+ * TSL45311/TSL45313: 7-bit I2C slave address 0x39
+ * TSL45315/TSL45317: 7-bit I2C slave address 0x29
+ *
+ * TODO: single cycle measurement
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define TSL4531_DRV_NAME "tsl4531"
+
+#define TCS3472_COMMAND BIT(7)
+
+#define TSL4531_CONTROL (TCS3472_COMMAND | 0x00)
+#define TSL4531_CONFIG (TCS3472_COMMAND | 0x01)
+#define TSL4531_DATA (TCS3472_COMMAND | 0x04)
+#define TSL4531_ID (TCS3472_COMMAND | 0x0a)
+
+/* operating modes in control register */
+#define TSL4531_MODE_POWERDOWN 0x00
+#define TSL4531_MODE_SINGLE_ADC 0x02
+#define TSL4531_MODE_NORMAL 0x03
+
+/* integration time control in config register */
+#define TSL4531_TCNTRL_400MS 0x00
+#define TSL4531_TCNTRL_200MS 0x01
+#define TSL4531_TCNTRL_100MS 0x02
+
+/* part number in id register */
+#define TSL45311_ID 0x8
+#define TSL45313_ID 0x9
+#define TSL45315_ID 0xa
+#define TSL45317_ID 0xb
+#define TSL4531_ID_SHIFT 4
+
+struct tsl4531_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ int int_time;
+};
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4");
+
+static struct attribute *tsl4531_attributes[] = {
+ &iio_const_attr_integration_time_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tsl4531_attribute_group = {
+ .attrs = tsl4531_attributes,
+};
+
+static const struct iio_chan_spec tsl4531_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME)
+ }
+};
+
+static int tsl4531_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct tsl4531_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = i2c_smbus_read_word_data(data->client,
+ TSL4531_DATA);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ /* 0.. 1x, 1 .. 2x, 2 .. 4x */
+ *val = 1 << data->int_time;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (data->int_time == 0)
+ *val2 = 400000;
+ else if (data->int_time == 1)
+ *val2 = 200000;
+ else if (data->int_time == 2)
+ *val2 = 100000;
+ else
+ return -EINVAL;
+ *val = 0;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int tsl4531_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct tsl4531_data *data = iio_priv(indio_dev);
+ int int_time, ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ if (val != 0)
+ return -EINVAL;
+ if (val2 == 400000)
+ int_time = 0;
+ else if (val2 == 200000)
+ int_time = 1;
+ else if (val2 == 100000)
+ int_time = 2;
+ else
+ return -EINVAL;
+ mutex_lock(&data->lock);
+ ret = i2c_smbus_write_byte_data(data->client,
+ TSL4531_CONFIG, int_time);
+ if (ret >= 0)
+ data->int_time = int_time;
+ mutex_unlock(&data->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info tsl4531_info = {
+ .read_raw = tsl4531_read_raw,
+ .write_raw = tsl4531_write_raw,
+ .attrs = &tsl4531_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static int tsl4531_check_id(struct i2c_client *client)
+{
+ int ret = i2c_smbus_read_byte_data(client, TSL4531_ID);
+ if (ret < 0)
+ return ret;
+
+ switch (ret >> TSL4531_ID_SHIFT) {
+ case TSL45311_ID:
+ case TSL45313_ID:
+ case TSL45315_ID:
+ case TSL45317_ID:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int tsl4531_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tsl4531_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ if (!tsl4531_check_id(client)) {
+ dev_err(&client->dev, "no TSL4531 sensor\n");
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL,
+ TSL4531_MODE_NORMAL);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG,
+ TSL4531_TCNTRL_400MS);
+ if (ret < 0)
+ return ret;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &tsl4531_info;
+ indio_dev->channels = tsl4531_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels);
+ indio_dev->name = TSL4531_DRV_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ return iio_device_register(indio_dev);
+}
+
+static int tsl4531_powerdown(struct i2c_client *client)
+{
+ return i2c_smbus_write_byte_data(client, TSL4531_CONTROL,
+ TSL4531_MODE_POWERDOWN);
+}
+
+static int tsl4531_remove(struct i2c_client *client)
+{
+ iio_device_unregister(i2c_get_clientdata(client));
+ tsl4531_powerdown(client);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tsl4531_suspend(struct device *dev)
+{
+ return tsl4531_powerdown(to_i2c_client(dev));
+}
+
+static int tsl4531_resume(struct device *dev)
+{
+ return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
+ TSL4531_MODE_NORMAL);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+
+static const struct i2c_device_id tsl4531_id[] = {
+ { "tsl4531", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tsl4531_id);
+
+static struct i2c_driver tsl4531_driver = {
+ .driver = {
+ .name = TSL4531_DRV_NAME,
+ .pm = &tsl4531_pm_ops,
+ .owner = THIS_MODULE,
+ },
+ .probe = tsl4531_probe,
+ .remove = tsl4531_remove,
+ .id_table = tsl4531_id,
+};
+
+module_i2c_driver(tsl4531_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
next prev parent reply other threads:[~2013-09-08 15:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-08 15:20 [PATCH 0/4] add INT_TIME and drivers using it Peter Meerwald
2013-09-08 15:20 ` [PATCH 1/4] iio: Add INT_TIME (integration time) channel info attribute Peter Meerwald
2013-09-14 11:11 ` Jonathan Cameron
2013-09-08 15:20 ` [PATCH 2/4] iio: adjd_s311: Use INT_TIME channel info Peter Meerwald
2013-09-14 11:15 ` Jonathan Cameron
2013-09-08 15:20 ` Peter Meerwald [this message]
2013-09-14 11:21 ` [PATCH 3/4] iio: Add tsl4531 ambient light sensor driver Jonathan Cameron
2013-09-14 19:13 ` Peter Meerwald
2013-09-14 20:18 ` Jonathan Cameron
2013-09-08 15:20 ` [PATCH 4/4] iio: Add tcs3472 color " Peter Meerwald
2013-09-14 11:42 ` Jonathan Cameron
2013-09-14 19:38 ` [PATCH v2] " Peter Meerwald
2013-09-14 20:46 ` Jonathan Cameron
2013-09-15 15:51 ` Peter Meerwald
2013-09-15 15:52 ` [PATCH] iio: Fix tcs3472 buffer size Peter Meerwald
2013-09-15 16:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378653659-15665-4-git-send-email-pmeerw@pmeerw.net \
--to=pmeerw@pmeerw.net \
--cc=jic23@kernel.org \
--cc=jon.brenner@ams.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).