From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ea0-f175.google.com ([209.85.215.175]:42198 "EHLO mail-ea0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752295Ab3IIKKa (ORCPT ); Mon, 9 Sep 2013 06:10:30 -0400 Received: by mail-ea0-f175.google.com with SMTP id m14so3031069eaj.34 for ; Mon, 09 Sep 2013 03:10:29 -0700 (PDT) From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, jic23@cam.ac.uk Cc: arnd@arndb.de, linus.walleij@linaro.org, denis.ciocca@st.com, linux-iio@vger.kernel.org, Lee Jones Subject: [PATCH 07/14] iio: pressure-core: st: Allow for number of channels to vary Date: Mon, 9 Sep 2013 11:10:03 +0100 Message-Id: <1378721410-30937-8-git-send-email-lee.jones@linaro.org> In-Reply-To: <1378721410-30937-1-git-send-email-lee.jones@linaro.org> References: <1378721410-30937-1-git-send-email-lee.jones@linaro.org> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org At the moment the number of channels specified is dictated by the first sensor supported by the driver. As we add support for more sensors this is likely to vary. Instead of using the ARRAY_SIZE() of the LPS331AP's channel specifier we'll use a new adaptable 'struct st_sensors' element instead. Signed-off-by: Lee Jones --- drivers/iio/pressure/st_pressure_core.c | 3 ++- include/linux/iio/common/st_sensors.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 506b02d..93bff9b 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -107,6 +107,7 @@ static const struct st_sensors st_press_sensors[] = { [0] = LPS331AP_PRESS_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_press_lps331ap_channels, + .num_ch = ARRAY_SIZE(st_press_lps331ap_channels), .odr = { .addr = ST_PRESS_LPS331AP_ODR_ADDR, .mask = ST_PRESS_LPS331AP_ODR_MASK, @@ -245,7 +246,7 @@ int st_press_common_probe(struct iio_dev *indio_dev, pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS; pdata->multiread_bit = pdata->sensor->multi_read_bit; indio_dev->channels = pdata->sensor->ch; - indio_dev->num_channels = ARRAY_SIZE(st_press_lps331ap_channels); + indio_dev->num_channels = pdata->sensor->num_ch; if (pdata->sensor->fs.addr != 0) pdata->current_fullscale = (struct st_sensor_fullscale_avl *) diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index e51f654..e732fda 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -184,6 +184,7 @@ struct st_sensors { u8 wai; char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME]; struct iio_chan_spec *ch; + int num_ch; struct st_sensor_odr odr; struct st_sensor_power pw; struct st_sensor_axis enable_axis; -- 1.8.1.2