From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ea0-f180.google.com ([209.85.215.180]:35776 "EHLO mail-ea0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751967Ab3IJMtu (ORCPT ); Tue, 10 Sep 2013 08:49:50 -0400 Received: by mail-ea0-f180.google.com with SMTP id h10so3884823eaj.11 for ; Tue, 10 Sep 2013 05:49:49 -0700 (PDT) From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, jic23@cam.ac.uk Cc: arnd@arndb.de, linus.walleij@linaro.org, denis.ciocca@st.com, linux-iio@vger.kernel.org, Lee Jones Subject: [PATCH 02/38] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT Date: Tue, 10 Sep 2013 13:49:03 +0100 Message-Id: <1378817379-8238-3-git-send-email-lee.jones@linaro.org> In-Reply-To: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org After applying this node the LPS001WP sensor chip should probe successfully once the driver support has also been applied. Signed-off-by: Lee Jones --- arch/arm/boot/dts/ste-snowball.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f1fc128..d355d25 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -153,6 +153,16 @@ status = "okay"; }; + i2c@80128000 { + lps001wp_press@5c { + compatible = "st,lps001wp_press"; + reg = <0x5c>; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + uart@80120000 { status = "okay"; }; -- 1.8.1.2