From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, jic23@cam.ac.uk Cc: arnd@arndb.de, linus.walleij@linaro.org, denis.ciocca@st.com, linux-iio@vger.kernel.org, Lee Jones Subject: [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group Date: Tue, 10 Sep 2013 13:49:33 +0100 Message-Id: <1378817379-8238-33-git-send-email-lee.jones@linaro.org> In-Reply-To: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> List-ID: The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by Accel Sensor group one. For the device to probe without error, we'll need to ensure it's registered with the correct WAI. Signed-off-by: Lee Jones --- drivers/iio/accel/st_accel_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index ea62291..03a2b6b 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = { [2] = LSM330D_ACCEL_DEV_NAME, [3] = LSM330DL_ACCEL_DEV_NAME, [4] = LSM330DLC_ACCEL_DEV_NAME, + [5] = LSM303DLH_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_12bit_channels, .odr = { @@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = { .sensors_supported = { [0] = LIS331DLH_ACCEL_DEV_NAME, [1] = LSM303DL_ACCEL_DEV_NAME, - [2] = LSM303DLH_ACCEL_DEV_NAME, - [3] = LSM303DLM_ACCEL_DEV_NAME, + [2] = LSM303DLM_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_12bit_channels, .odr = { -- 1.8.1.2