From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 11/20] staging:iio:ad7291: Switch to new event config interface
Date: Mon, 7 Oct 2013 16:11:25 +0200 [thread overview]
Message-ID: <1381155094-20166-11-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1381155094-20166-1-git-send-email-lars@metafoo.de>
Switch the ad7291 driver to the new IIO event config interface as the old one
is going to be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/staging/iio/adc/ad7291.c | 96 ++++++++++++++++++++++++----------------
1 file changed, 59 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index 1dae1ef..be4d93a 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -248,13 +248,14 @@ static struct attribute *ad7291_event_attributes[] = {
NULL,
};
-static unsigned int ad7291_threshold_reg(u64 event_code)
+static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
+ enum iio_event_direction dir)
{
unsigned int offset;
- switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ switch (chan->type) {
case IIO_VOLTAGE:
- offset = IIO_EVENT_CODE_EXTRACT_CHAN(event_code);
+ offset = chan->channel;
break;
case IIO_TEMP:
offset = 8;
@@ -263,43 +264,49 @@ static unsigned int ad7291_threshold_reg(u64 event_code)
return 0;
}
- if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_FALLING)
+ if (dir == IIO_EV_DIR_FALLING)
return AD7291_DATA_LOW(offset);
else
return AD7291_DATA_HIGH(offset);
}
static int ad7291_read_event_value(struct iio_dev *indio_dev,
- u64 event_code,
- int *val)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
{
struct ad7291_chip_info *chip = iio_priv(indio_dev);
int ret;
u16 uval;
- ret = ad7291_i2c_read(chip, ad7291_threshold_reg(event_code), &uval);
+ ret = ad7291_i2c_read(chip, ad7291_threshold_reg(chan, dir), &uval);
if (ret < 0)
return ret;
- switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ switch (chan->type) {
case IIO_VOLTAGE:
*val = uval & AD7291_VALUE_MASK;
- return 0;
+ return IIO_VAL_INT;
case IIO_TEMP:
*val = sign_extend32(uval, 11);
- return 0;
+ return IIO_VAL_INT;
default:
return -EINVAL;
};
}
static int ad7291_write_event_value(struct iio_dev *indio_dev,
- u64 event_code,
- int val)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
{
struct ad7291_chip_info *chip = iio_priv(indio_dev);
- switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ switch (chan->type) {
case IIO_VOLTAGE:
if (val > AD7291_VALUE_MASK || val < 0)
return -EINVAL;
@@ -312,20 +319,21 @@ static int ad7291_write_event_value(struct iio_dev *indio_dev,
return -EINVAL;
}
- return ad7291_i2c_write(chip, ad7291_threshold_reg(event_code), val);
+ return ad7291_i2c_write(chip, ad7291_threshold_reg(chan, dir), val);
}
static int ad7291_read_event_config(struct iio_dev *indio_dev,
- u64 event_code)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
{
struct ad7291_chip_info *chip = iio_priv(indio_dev);
/* To be enabled the channel must simply be on. If any are enabled
we are in continuous sampling mode */
- switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ switch (chan->type) {
case IIO_VOLTAGE:
- if (chip->c_mask &
- (1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN(event_code))))
+ if (chip->c_mask & (1 << (15 - chan->channel)))
return 1;
else
return 0;
@@ -339,11 +347,14 @@ static int ad7291_read_event_config(struct iio_dev *indio_dev,
}
static int ad7291_write_event_config(struct iio_dev *indio_dev,
- u64 event_code,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
int state)
{
int ret = 0;
struct ad7291_chip_info *chip = iio_priv(indio_dev);
+ unsigned int mask;
u16 regval;
mutex_lock(&chip->state_lock);
@@ -354,16 +365,14 @@ static int ad7291_write_event_config(struct iio_dev *indio_dev,
* Possible to disable temp as well but that makes single read tricky.
*/
- switch (IIO_EVENT_CODE_EXTRACT_TYPE(event_code)) {
+ mask = BIT(15 - chan->channel);
+
+ switch (chan->type) {
case IIO_VOLTAGE:
- if ((!state) && (chip->c_mask & (1 << (15 -
- IIO_EVENT_CODE_EXTRACT_CHAN(event_code)))))
- chip->c_mask &= ~(1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN
- (event_code)));
- else if (state && (!(chip->c_mask & (1 << (15 -
- IIO_EVENT_CODE_EXTRACT_CHAN(event_code))))))
- chip->c_mask |= (1 << (15 - IIO_EVENT_CODE_EXTRACT_CHAN
- (event_code)));
+ if ((!state) && (chip->c_mask & mask))
+ chip->c_mask &= ~mask;
+ else if (state && (!(chip->c_mask & mask)))
+ chip->c_mask |= mask;
else
break;
@@ -473,6 +482,20 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
}
}
+static const struct iio_event_spec ad7291_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
#define AD7291_VOLTAGE_CHAN(_chan) \
{ \
.type = IIO_VOLTAGE, \
@@ -480,8 +503,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.indexed = 1, \
.channel = _chan, \
- .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\
- IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) \
+ .event_spec = ad7291_events, \
+ .num_event_specs = ARRAY_SIZE(ad7291_events), \
}
static const struct iio_chan_spec ad7291_channels[] = {
@@ -500,9 +523,8 @@ static const struct iio_chan_spec ad7291_channels[] = {
BIT(IIO_CHAN_INFO_SCALE),
.indexed = 1,
.channel = 0,
- .event_mask =
- IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|
- IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)
+ .event_spec = ad7291_events,
+ .num_event_specs = ARRAY_SIZE(ad7291_events),
}
};
@@ -512,10 +534,10 @@ static struct attribute_group ad7291_event_attribute_group = {
static const struct iio_info ad7291_info = {
.read_raw = &ad7291_read_raw,
- .read_event_config = &ad7291_read_event_config,
- .write_event_config = &ad7291_write_event_config,
- .read_event_value = &ad7291_read_event_value,
- .write_event_value = &ad7291_write_event_value,
+ .read_event_config_new = &ad7291_read_event_config,
+ .write_event_config_new = &ad7291_write_event_config,
+ .read_event_value_new = &ad7291_read_event_value,
+ .write_event_value_new = &ad7291_write_event_value,
.event_attrs = &ad7291_event_attribute_group,
.driver_module = THIS_MODULE,
};
--
1.8.0
next prev parent reply other threads:[~2013-10-07 14:09 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-07 14:11 [PATCH v2 01/20] iio: Factor IIO value formating into its own function Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 02/20] iio: Extend the event config interface Lars-Peter Clausen
2013-10-12 11:33 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 03/20] iio:max1363: Switch to new " Lars-Peter Clausen
2013-10-12 11:34 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 04/20] iio:ad5421: " Lars-Peter Clausen
2013-10-12 11:35 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 05/20] iio:gp2ap020a00f: " Lars-Peter Clausen
2013-10-12 11:36 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 06/20] iio:tsl2563: " Lars-Peter Clausen
2013-10-12 11:39 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 07/20] iio:apds9300: Use " Lars-Peter Clausen
2013-10-12 11:41 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 08/20] staging:iio:lis3l02dq: Switch to " Lars-Peter Clausen
2013-10-12 11:42 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 09/20] staging:iio:lis2l02dq: Share threshold value between axis Lars-Peter Clausen
2013-10-12 11:43 ` Jonathan Cameron
2013-10-12 11:45 ` Jonathan Cameron
2013-10-12 10:51 ` Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 10/20] staging:iio:sca3000: Switch to new config interface Lars-Peter Clausen
2013-10-12 11:46 ` Jonathan Cameron
2013-10-07 14:11 ` Lars-Peter Clausen [this message]
2013-10-12 11:46 ` [PATCH v2 11/20] staging:iio:ad7291: Switch to new event " Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 12/20] staging:iio:ad799x: " Lars-Peter Clausen
2013-10-12 11:47 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 13/20] staging:iio:ad7150: " Lars-Peter Clausen
2013-10-12 11:48 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 14/20] staging:iio:simple_dummy: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 15/20] staging:iio:tsl2x7x: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 16/20] iio: Add a hysteresis event info attribute Lars-Peter Clausen
2013-10-12 11:51 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 17/20] staging:iio:ad799x: Simplify threshold register look-up Lars-Peter Clausen
2013-10-12 11:52 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 18/20] staging:iio:ad799x: Use event spec for threshold hysteresis Lars-Peter Clausen
2013-10-12 12:02 ` Jonathan Cameron
2013-10-12 11:40 ` Lars-Peter Clausen
2013-10-12 13:05 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 19/20] staging:iio:ad7291: " Lars-Peter Clausen
2013-10-12 12:04 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 20/20] iio: Remove support for the legacy event config interface Lars-Peter Clausen
2013-10-12 11:24 ` [PATCH v2 01/20] iio: Factor IIO value formating into its own function Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381155094-20166-11-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).