linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 19/20] staging:iio:ad7291: Use event spec for threshold hysteresis
Date: Mon,  7 Oct 2013 16:11:33 +0200	[thread overview]
Message-ID: <1381155094-20166-19-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1381155094-20166-1-git-send-email-lars@metafoo.de>

Register the event threshold hysteresis attributes by using the new
IIO_EV_INFO_HYSTERESIS event spec type. This allows us to throw away a good
portion of boiler-plate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 drivers/staging/iio/adc/ad7291.c | 139 ++++++++-------------------------------
 1 file changed, 28 insertions(+), 111 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index be4d93a..d13f8ae 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -164,92 +164,8 @@ static irqreturn_t ad7291_event_handler(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
-static inline ssize_t ad7291_show_hyst(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad7291_chip_info *chip = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	u16 data;
-	int ret;
-
-	ret = ad7291_i2c_read(chip, this_attr->address, &data);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", data & AD7291_VALUE_MASK);
-}
-
-static inline ssize_t ad7291_set_hyst(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf,
-				      size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct ad7291_chip_info *chip = iio_priv(indio_dev);
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	u16 data;
-	int ret;
-
-	ret = kstrtou16(buf, 10, &data);
-
-	if (ret < 0)
-		return ret;
-	if (data > AD7291_VALUE_MASK)
-		return -EINVAL;
-
-	ret = ad7291_i2c_write(chip, this_attr->address, data);
-	if (ret < 0)
-		return ret;
-
-	return len;
-}
-
-static IIO_DEVICE_ATTR(in_temp0_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst,
-		       AD7291_HYST(8));
-static IIO_DEVICE_ATTR(in_voltage0_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(0));
-static IIO_DEVICE_ATTR(in_voltage1_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(1));
-static IIO_DEVICE_ATTR(in_voltage2_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(2));
-static IIO_DEVICE_ATTR(in_voltage3_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(3));
-static IIO_DEVICE_ATTR(in_voltage4_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(4));
-static IIO_DEVICE_ATTR(in_voltage5_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(5));
-static IIO_DEVICE_ATTR(in_voltage6_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(6));
-static IIO_DEVICE_ATTR(in_voltage7_thresh_both_hyst_raw,
-		       S_IRUGO | S_IWUSR,
-		       ad7291_show_hyst, ad7291_set_hyst, AD7291_HYST(7));
-
-static struct attribute *ad7291_event_attributes[] = {
-	&iio_dev_attr_in_temp0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage0_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage1_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage2_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage3_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage4_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage5_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage6_thresh_both_hyst_raw.dev_attr.attr,
-	&iio_dev_attr_in_voltage7_thresh_both_hyst_raw.dev_attr.attr,
-	NULL,
-};
-
 static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
-	enum iio_event_direction dir)
+	enum iio_event_direction dir, enum iio_event_info info)
 {
 	unsigned int offset;
 
@@ -264,10 +180,18 @@ static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
 	    return 0;
 	}
 
-	if (dir == IIO_EV_DIR_FALLING)
-		return AD7291_DATA_LOW(offset);
-	else
-		return AD7291_DATA_HIGH(offset);
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+			if (dir == IIO_EV_DIR_FALLING)
+					return AD7291_DATA_HIGH(offset);
+			else
+					return AD7291_DATA_LOW(offset);
+	case IIO_EV_INFO_HYSTERESIS:
+			return AD7291_HYST(offset);
+	default:
+			break;
+	}
+	return 0;
 }
 
 static int ad7291_read_event_value(struct iio_dev *indio_dev,
@@ -281,20 +205,18 @@ static int ad7291_read_event_value(struct iio_dev *indio_dev,
 	int ret;
 	u16 uval;
 
-	ret = ad7291_i2c_read(chip, ad7291_threshold_reg(chan, dir), &uval);
+	ret = ad7291_i2c_read(chip, ad7291_threshold_reg(chan, dir, info),
+		&uval);
 	if (ret < 0)
 		return ret;
 
-	switch (chan->type) {
-	case IIO_VOLTAGE:
+	if (info == IIO_EV_INFO_HYSTERESIS || chan->type == IIO_VOLTAGE)
 		*val = uval & AD7291_VALUE_MASK;
-		return IIO_VAL_INT;
-	case IIO_TEMP:
+
+	else
 		*val = sign_extend32(uval, 11);
-		return IIO_VAL_INT;
-	default:
-		return -EINVAL;
-	};
+
+	return IIO_VAL_INT;
 }
 
 static int ad7291_write_event_value(struct iio_dev *indio_dev,
@@ -306,20 +228,16 @@ static int ad7291_write_event_value(struct iio_dev *indio_dev,
 {
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 
-	switch (chan->type) {
-	case IIO_VOLTAGE:
+	if (info == IIO_EV_INFO_HYSTERESIS || chan->type == IIO_VOLTAGE) {
 		if (val > AD7291_VALUE_MASK || val < 0)
 			return -EINVAL;
-		break;
-	case IIO_TEMP:
+	} else {
 		if (val > 2047 || val < -2048)
 			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
 	}
 
-	return ad7291_i2c_write(chip, ad7291_threshold_reg(chan, dir), val);
+	return ad7291_i2c_write(chip, ad7291_threshold_reg(chan, dir, info),
+		val);
 }
 
 static int ad7291_read_event_config(struct iio_dev *indio_dev,
@@ -493,6 +411,10 @@ static const struct iio_event_spec ad7291_events[] = {
 		.dir = IIO_EV_DIR_FALLING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
 	},
 };
 
@@ -528,17 +450,12 @@ static const struct iio_chan_spec ad7291_channels[] = {
 	}
 };
 
-static struct attribute_group ad7291_event_attribute_group = {
-	.attrs = ad7291_event_attributes,
-};
-
 static const struct iio_info ad7291_info = {
 	.read_raw = &ad7291_read_raw,
 	.read_event_config_new = &ad7291_read_event_config,
 	.write_event_config_new = &ad7291_write_event_config,
 	.read_event_value_new = &ad7291_read_event_value,
 	.write_event_value_new = &ad7291_write_event_value,
-	.event_attrs = &ad7291_event_attribute_group,
 	.driver_module = THIS_MODULE,
 };
 
-- 
1.8.0


  parent reply	other threads:[~2013-10-07 14:09 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-07 14:11 [PATCH v2 01/20] iio: Factor IIO value formating into its own function Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 02/20] iio: Extend the event config interface Lars-Peter Clausen
2013-10-12 11:33   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 03/20] iio:max1363: Switch to new " Lars-Peter Clausen
2013-10-12 11:34   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 04/20] iio:ad5421: " Lars-Peter Clausen
2013-10-12 11:35   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 05/20] iio:gp2ap020a00f: " Lars-Peter Clausen
2013-10-12 11:36   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 06/20] iio:tsl2563: " Lars-Peter Clausen
2013-10-12 11:39   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 07/20] iio:apds9300: Use " Lars-Peter Clausen
2013-10-12 11:41   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 08/20] staging:iio:lis3l02dq: Switch to " Lars-Peter Clausen
2013-10-12 11:42   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 09/20] staging:iio:lis2l02dq: Share threshold value between axis Lars-Peter Clausen
2013-10-12 11:43   ` Jonathan Cameron
2013-10-12 11:45   ` Jonathan Cameron
2013-10-12 10:51     ` Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 10/20] staging:iio:sca3000: Switch to new config interface Lars-Peter Clausen
2013-10-12 11:46   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 11/20] staging:iio:ad7291: Switch to new event " Lars-Peter Clausen
2013-10-12 11:46   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 12/20] staging:iio:ad799x: " Lars-Peter Clausen
2013-10-12 11:47   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 13/20] staging:iio:ad7150: " Lars-Peter Clausen
2013-10-12 11:48   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 14/20] staging:iio:simple_dummy: " Lars-Peter Clausen
2013-10-12 11:50   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 15/20] staging:iio:tsl2x7x: " Lars-Peter Clausen
2013-10-12 11:50   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 16/20] iio: Add a hysteresis event info attribute Lars-Peter Clausen
2013-10-12 11:51   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 17/20] staging:iio:ad799x: Simplify threshold register look-up Lars-Peter Clausen
2013-10-12 11:52   ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 18/20] staging:iio:ad799x: Use event spec for threshold hysteresis Lars-Peter Clausen
2013-10-12 12:02   ` Jonathan Cameron
2013-10-12 11:40     ` Lars-Peter Clausen
2013-10-12 13:05       ` Jonathan Cameron
2013-10-07 14:11 ` Lars-Peter Clausen [this message]
2013-10-12 12:04   ` [PATCH v2 19/20] staging:iio:ad7291: " Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 20/20] iio: Remove support for the legacy event config interface Lars-Peter Clausen
2013-10-12 11:24 ` [PATCH v2 01/20] iio: Factor IIO value formating into its own function Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381155094-20166-19-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).