From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 06/20] iio:tsl2563: Switch to new event config interface
Date: Mon, 7 Oct 2013 16:11:20 +0200 [thread overview]
Message-ID: <1381155094-20166-6-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1381155094-20166-1-git-send-email-lars@metafoo.de>
Switch the tsl2563 driver to the new IIO event config interface as the old one
is going to be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/iio/light/tsl2563.c | 53 +++++++++++++++++++++++++++++----------------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index ebb962c..5e5d9de 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -526,6 +526,20 @@ error_ret:
return ret;
}
+static const struct iio_event_spec tsl2563_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
static const struct iio_chan_spec tsl2563_channels[] = {
{
.type = IIO_LIGHT,
@@ -538,10 +552,8 @@ static const struct iio_chan_spec tsl2563_channels[] = {
.channel2 = IIO_MOD_LIGHT_BOTH,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_CALIBSCALE),
- .event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_RISING) |
- IIO_EV_BIT(IIO_EV_TYPE_THRESH,
- IIO_EV_DIR_FALLING)),
+ .event_spec = tsl2563_events,
+ .num_event_specs = ARRAY_SIZE(tsl2563_events),
}, {
.type = IIO_INTENSITY,
.modified = 1,
@@ -552,12 +564,13 @@ static const struct iio_chan_spec tsl2563_channels[] = {
};
static int tsl2563_read_thresh(struct iio_dev *indio_dev,
- u64 event_code,
- int *val)
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info, int *val,
+ int *val2)
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
- switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+ switch (dir) {
case IIO_EV_DIR_RISING:
*val = chip->high_thres;
break;
@@ -568,18 +581,19 @@ static int tsl2563_read_thresh(struct iio_dev *indio_dev,
return -EINVAL;
}
- return 0;
+ return IIO_VAL_INT;
}
static int tsl2563_write_thresh(struct iio_dev *indio_dev,
- u64 event_code,
- int val)
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info, int val,
+ int val2)
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
int ret;
u8 address;
- if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+ if (dir == IIO_EV_DIR_RISING)
address = TSL2563_REG_HIGHLOW;
else
address = TSL2563_REG_LOWLOW;
@@ -591,7 +605,7 @@ static int tsl2563_write_thresh(struct iio_dev *indio_dev,
ret = i2c_smbus_write_byte_data(chip->client,
TSL2563_CMD | (address + 1),
(val >> 8) & 0xFF);
- if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+ if (dir == IIO_EV_DIR_RISING)
chip->high_thres = val;
else
chip->low_thres = val;
@@ -620,8 +634,8 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
}
static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
- u64 event_code,
- int state)
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, int state)
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
int ret = 0;
@@ -662,7 +676,8 @@ out:
}
static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
- u64 event_code)
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir)
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
int ret;
@@ -687,10 +702,10 @@ static const struct iio_info tsl2563_info = {
.driver_module = THIS_MODULE,
.read_raw = &tsl2563_read_raw,
.write_raw = &tsl2563_write_raw,
- .read_event_value = &tsl2563_read_thresh,
- .write_event_value = &tsl2563_write_thresh,
- .read_event_config = &tsl2563_read_interrupt_config,
- .write_event_config = &tsl2563_write_interrupt_config,
+ .read_event_value_new = &tsl2563_read_thresh,
+ .write_event_value_new = &tsl2563_write_thresh,
+ .read_event_config_new = &tsl2563_read_interrupt_config,
+ .write_event_config_new = &tsl2563_write_interrupt_config,
};
static int tsl2563_probe(struct i2c_client *client,
--
1.8.0
next prev parent reply other threads:[~2013-10-07 14:09 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-07 14:11 [PATCH v2 01/20] iio: Factor IIO value formating into its own function Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 02/20] iio: Extend the event config interface Lars-Peter Clausen
2013-10-12 11:33 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 03/20] iio:max1363: Switch to new " Lars-Peter Clausen
2013-10-12 11:34 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 04/20] iio:ad5421: " Lars-Peter Clausen
2013-10-12 11:35 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 05/20] iio:gp2ap020a00f: " Lars-Peter Clausen
2013-10-12 11:36 ` Jonathan Cameron
2013-10-07 14:11 ` Lars-Peter Clausen [this message]
2013-10-12 11:39 ` [PATCH v2 06/20] iio:tsl2563: " Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 07/20] iio:apds9300: Use " Lars-Peter Clausen
2013-10-12 11:41 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 08/20] staging:iio:lis3l02dq: Switch to " Lars-Peter Clausen
2013-10-12 11:42 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 09/20] staging:iio:lis2l02dq: Share threshold value between axis Lars-Peter Clausen
2013-10-12 11:43 ` Jonathan Cameron
2013-10-12 11:45 ` Jonathan Cameron
2013-10-12 10:51 ` Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 10/20] staging:iio:sca3000: Switch to new config interface Lars-Peter Clausen
2013-10-12 11:46 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 11/20] staging:iio:ad7291: Switch to new event " Lars-Peter Clausen
2013-10-12 11:46 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 12/20] staging:iio:ad799x: " Lars-Peter Clausen
2013-10-12 11:47 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 13/20] staging:iio:ad7150: " Lars-Peter Clausen
2013-10-12 11:48 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 14/20] staging:iio:simple_dummy: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 15/20] staging:iio:tsl2x7x: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 16/20] iio: Add a hysteresis event info attribute Lars-Peter Clausen
2013-10-12 11:51 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 17/20] staging:iio:ad799x: Simplify threshold register look-up Lars-Peter Clausen
2013-10-12 11:52 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 18/20] staging:iio:ad799x: Use event spec for threshold hysteresis Lars-Peter Clausen
2013-10-12 12:02 ` Jonathan Cameron
2013-10-12 11:40 ` Lars-Peter Clausen
2013-10-12 13:05 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 19/20] staging:iio:ad7291: " Lars-Peter Clausen
2013-10-12 12:04 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 20/20] iio: Remove support for the legacy event config interface Lars-Peter Clausen
2013-10-12 11:24 ` [PATCH v2 01/20] iio: Factor IIO value formating into its own function Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381155094-20166-6-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).