From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 08/20] staging:iio:lis3l02dq: Switch to new event config interface
Date: Mon, 7 Oct 2013 16:11:22 +0200 [thread overview]
Message-ID: <1381155094-20166-8-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1381155094-20166-1-git-send-email-lars@metafoo.de>
Switch the lis3l02dq driver to the new IIO event config interface as the old one
is going to be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/staging/iio/accel/lis3l02dq_core.c | 64 ++++++++++++++++++++----------
1 file changed, 43 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index bb852dc..78187f1 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -190,15 +190,26 @@ static u8 lis3l02dq_axis_map[3][3] = {
};
static int lis3l02dq_read_thresh(struct iio_dev *indio_dev,
- u64 e,
- int *val)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
{
- return lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val);
+ int ret;
+
+ ret = lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
}
static int lis3l02dq_write_thresh(struct iio_dev *indio_dev,
- u64 event_code,
- int val)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
{
u16 value = val;
return lis3l02dq_spi_write_reg_s16(indio_dev,
@@ -503,9 +514,19 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
return IRQ_HANDLED;
}
-#define LIS3L02DQ_EVENT_MASK \
- (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
- IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
+static const struct iio_event_spec lis3l02dq_event[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }
+};
#define LIS3L02DQ_CHAN(index, mod) \
{ \
@@ -523,7 +544,8 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
.realbits = 12, \
.storagebits = 16, \
}, \
- .event_mask = LIS3L02DQ_EVENT_MASK, \
+ .event_spec = lis3l02dq_event, \
+ .num_event_specs = ARRAY_SIZE(lis3l02dq_event), \
}
static const struct iio_chan_spec lis3l02dq_channels[] = {
@@ -535,14 +557,14 @@ static const struct iio_chan_spec lis3l02dq_channels[] = {
static int lis3l02dq_read_event_config(struct iio_dev *indio_dev,
- u64 event_code)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
{
u8 val;
int ret;
- u8 mask = (1 << (IIO_EVENT_CODE_EXTRACT_MODIFIER(event_code)*2 +
- (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
- IIO_EV_DIR_RISING)));
+ u8 mask = (1 << (chan->channel2*2 + (dir == IIO_EV_DIR_RISING)));
ret = lis3l02dq_spi_read_reg_8(indio_dev,
LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
&val);
@@ -587,16 +609,16 @@ error_ret:
}
static int lis3l02dq_write_event_config(struct iio_dev *indio_dev,
- u64 event_code,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
int state)
{
int ret = 0;
u8 val, control;
u8 currentlyset;
bool changed = false;
- u8 mask = (1 << (IIO_EVENT_CODE_EXTRACT_MODIFIER(event_code)*2 +
- (IIO_EVENT_CODE_EXTRACT_DIR(event_code) ==
- IIO_EV_DIR_RISING)));
+ u8 mask = (1 << (chan->channel2*2 + (dir == IIO_EV_DIR_RISING)));
mutex_lock(&indio_dev->mlock);
/* read current control */
@@ -654,10 +676,10 @@ static const struct attribute_group lis3l02dq_attribute_group = {
static const struct iio_info lis3l02dq_info = {
.read_raw = &lis3l02dq_read_raw,
.write_raw = &lis3l02dq_write_raw,
- .read_event_value = &lis3l02dq_read_thresh,
- .write_event_value = &lis3l02dq_write_thresh,
- .write_event_config = &lis3l02dq_write_event_config,
- .read_event_config = &lis3l02dq_read_event_config,
+ .read_event_value_new = &lis3l02dq_read_thresh,
+ .write_event_value_new = &lis3l02dq_write_thresh,
+ .write_event_config_new = &lis3l02dq_write_event_config,
+ .read_event_config_new = &lis3l02dq_read_event_config,
.driver_module = THIS_MODULE,
.attrs = &lis3l02dq_attribute_group,
};
--
1.8.0
next prev parent reply other threads:[~2013-10-07 14:09 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-07 14:11 [PATCH v2 01/20] iio: Factor IIO value formating into its own function Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 02/20] iio: Extend the event config interface Lars-Peter Clausen
2013-10-12 11:33 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 03/20] iio:max1363: Switch to new " Lars-Peter Clausen
2013-10-12 11:34 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 04/20] iio:ad5421: " Lars-Peter Clausen
2013-10-12 11:35 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 05/20] iio:gp2ap020a00f: " Lars-Peter Clausen
2013-10-12 11:36 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 06/20] iio:tsl2563: " Lars-Peter Clausen
2013-10-12 11:39 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 07/20] iio:apds9300: Use " Lars-Peter Clausen
2013-10-12 11:41 ` Jonathan Cameron
2013-10-07 14:11 ` Lars-Peter Clausen [this message]
2013-10-12 11:42 ` [PATCH v2 08/20] staging:iio:lis3l02dq: Switch to " Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 09/20] staging:iio:lis2l02dq: Share threshold value between axis Lars-Peter Clausen
2013-10-12 11:43 ` Jonathan Cameron
2013-10-12 11:45 ` Jonathan Cameron
2013-10-12 10:51 ` Lars-Peter Clausen
2013-10-07 14:11 ` [PATCH v2 10/20] staging:iio:sca3000: Switch to new config interface Lars-Peter Clausen
2013-10-12 11:46 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 11/20] staging:iio:ad7291: Switch to new event " Lars-Peter Clausen
2013-10-12 11:46 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 12/20] staging:iio:ad799x: " Lars-Peter Clausen
2013-10-12 11:47 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 13/20] staging:iio:ad7150: " Lars-Peter Clausen
2013-10-12 11:48 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 14/20] staging:iio:simple_dummy: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 15/20] staging:iio:tsl2x7x: " Lars-Peter Clausen
2013-10-12 11:50 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 16/20] iio: Add a hysteresis event info attribute Lars-Peter Clausen
2013-10-12 11:51 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 17/20] staging:iio:ad799x: Simplify threshold register look-up Lars-Peter Clausen
2013-10-12 11:52 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 18/20] staging:iio:ad799x: Use event spec for threshold hysteresis Lars-Peter Clausen
2013-10-12 12:02 ` Jonathan Cameron
2013-10-12 11:40 ` Lars-Peter Clausen
2013-10-12 13:05 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 19/20] staging:iio:ad7291: " Lars-Peter Clausen
2013-10-12 12:04 ` Jonathan Cameron
2013-10-07 14:11 ` [PATCH v2 20/20] iio: Remove support for the legacy event config interface Lars-Peter Clausen
2013-10-12 11:24 ` [PATCH v2 01/20] iio: Factor IIO value formating into its own function Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381155094-20166-8-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).