From: Peter Meerwald <pmeerw@pmeerw.net>
To: linux-iio@vger.kernel.org
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Subject: [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling
Date: Thu, 17 Oct 2013 00:19:07 +0200 [thread overview]
Message-ID: <1381961954-25596-5-git-send-email-pmeerw@pmeerw.net> (raw)
In-Reply-To: <1381961954-25596-1-git-send-email-pmeerw@pmeerw.net>
v3:
* use __be16 instead of s16
v2 (thanks to Jonathan Cameron):
* drop dynamic buffer allocation, buffer is in hmc5842_data
* grab timestamp near data acquisition
* restrict available scan masks (only read all axis)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
drivers/staging/iio/magnetometer/hmc5843.c | 69 ++++++++++++++++++++++++++----
1 file changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index 78b97b0..aeaea09 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -23,6 +23,9 @@
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
#include <linux/delay.h>
#define HMC5843_CONFIG_REG_A 0x00
@@ -124,6 +127,7 @@ struct hmc5843_data {
u8 operating_mode;
u8 range;
const struct hmc5843_chip_info *variant;
+ __be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */
};
/* The lower two bits contain the current conversion mode */
@@ -403,7 +407,7 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
- return hmc5843_read_measurement(data, chan->address, val);
+ return hmc5843_read_measurement(data, chan->scan_index, val);
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = data->variant->regval_to_nanoscale[data->range];
@@ -468,6 +472,36 @@ static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
}
}
+static irqreturn_t hmc5843_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct hmc5843_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ ret = hmc5843_wait_measurement(data);
+ if (ret < 0) {
+ mutex_unlock(&data->lock);
+ goto done;
+ }
+
+ ret = i2c_smbus_read_i2c_block_data(data->client,
+ HMC5843_DATA_OUT_MSB_REGS, 3 * sizeof(__be16),
+ (u8 *) data->buffer);
+ mutex_unlock(&data->lock);
+ if (ret < 0)
+ goto done;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_get_time_ns());
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
#define HMC5843_CHANNEL(axis, idx) \
{ \
.type = IIO_MAGN, \
@@ -476,13 +510,15 @@ static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
- .address = idx \
+ .scan_index = idx, \
+ .scan_type = IIO_ST('s', 16, 16, IIO_BE), \
}
static const struct iio_chan_spec hmc5843_channels[] = {
HMC5843_CHANNEL(X, 0),
HMC5843_CHANNEL(Y, 1),
HMC5843_CHANNEL(Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
};
/* Beware: Y and Z are exchanged on HMC5883 */
@@ -490,6 +526,7 @@ static const struct iio_chan_spec hmc5883_channels[] = {
HMC5843_CHANNEL(X, 0),
HMC5843_CHANNEL(Z, 1),
HMC5843_CHANNEL(Y, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
};
static struct attribute *hmc5843_attributes[] = {
@@ -539,12 +576,14 @@ static const struct iio_info hmc5843_info = {
.driver_module = THIS_MODULE,
};
+static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
+
static int hmc5843_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct hmc5843_data *data;
struct iio_dev *indio_dev;
- int err = 0;
+ int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (indio_dev == NULL)
@@ -562,20 +601,34 @@ static int hmc5843_probe(struct i2c_client *client,
indio_dev->dev.parent = &client->dev;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = data->variant->channels;
- indio_dev->num_channels = 3;
+ indio_dev->num_channels = 4;
+ indio_dev->available_scan_masks = hmc5843_scan_masks;
hmc5843_init(data);
- err = iio_device_register(indio_dev);
- if (err)
- return err;
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ hmc5843_trigger_handler, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto buffer_cleanup;
return 0;
+
+buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
}
static int hmc5843_remove(struct i2c_client *client)
{
- iio_device_unregister(i2c_get_clientdata(client));
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+
/* sleep mode to save power */
hmc5843_configure(client, HMC5843_MODE_SLEEP);
--
1.8.4
next prev parent reply other threads:[~2013-10-16 22:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 22:19 [PATCH v4 00/11] hmc5843 cleanup Peter Meerwald
2013-10-16 22:19 ` [PATCH v4 01/11] staging:iio:hmc5843: Use SCALE instead of magn_range Peter Meerwald
2013-10-17 22:46 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 02/11] staging:iio:hmc5843: Rename _check_samp_freq to get_samp_freq_index Peter Meerwald
2013-10-17 22:47 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 03/11] staging:iio:hmc5843: Always read all channels values otherwise no updates Peter Meerwald
2013-10-17 22:49 ` Jonathan Cameron
2013-10-16 22:19 ` Peter Meerwald [this message]
2013-10-17 22:49 ` [PATCH v4 04/11] staging:iio:hmc5843: Add trigger handling Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 05/11] staging:iio:hmc5843: Remove ability to change operating mode Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 06/11] staging:iio:hmc5843: Rename _configure() to _set_mode() Peter Meerwald
2013-10-17 22:50 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 07/11] staging:iio:hmc5843: Reorganize _set_meas_conf() Peter Meerwald
2013-10-17 22:51 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 08/11] staging:iio:hmc5843: Rename _set_rate() to _set_samp_freq() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 09/11] staging:iio:hmc5843: Introduce _set_range_gain() Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 10/11] staging:iio:hmc5843: Check initialization and chip identifier Peter Meerwald
2013-10-17 22:52 ` Jonathan Cameron
2013-10-16 22:19 ` [PATCH v4 11/11] staging:iio:hmc5843: Trivial cleanup Peter Meerwald
2013-10-17 22:53 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381961954-25596-5-git-send-email-pmeerw@pmeerw.net \
--to=pmeerw@pmeerw.net \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).