From: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
To: jic23@cam.ac.uk
Cc: Ge Gao <ggao@invensense.com>,
Manuel Stahl <manuel.stahl@iis.fraunhofer.de>,
linux-iio@vger.kernel.org
Subject: [PATCH 2/3] iio: imu: inv_mpu6050: Fix typo and formatting
Date: Wed, 5 Feb 2014 11:34:34 +0100 [thread overview]
Message-ID: <1391596475-21986-2-git-send-email-manuel.stahl@iis.fraunhofer.de> (raw)
In-Reply-To: <1391596475-21986-1-git-send-email-manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 38 +++++++++++++++---------------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index df7f1e1..fda1ee2 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
return result;
if (en) {
- /* Wait for output stablize */
+ /* Wait for output stabilize */
msleep(INV_MPU6050_TEMP_UP_TIME);
if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
/* switch internal clock to PLL */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index f383955..0ab382b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -126,35 +126,35 @@ struct inv_mpu6050_state {
#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
#define INV_MPU6050_REG_CONFIG 0x1A
#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
-#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
+#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
#define INV_MPU6050_REG_FIFO_EN 0x23
-#define INV_MPU6050_BIT_ACCEL_OUT 0x08
-#define INV_MPU6050_BITS_GYRO_OUT 0x70
+#define INV_MPU6050_BIT_ACCEL_OUT 0x08
+#define INV_MPU6050_BITS_GYRO_OUT 0x70
#define INV_MPU6050_REG_INT_ENABLE 0x38
-#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
-#define INV_MPU6050_BIT_DMP_INT_EN 0x02
+#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
+#define INV_MPU6050_BIT_DMP_INT_EN 0x02
#define INV_MPU6050_REG_RAW_ACCEL 0x3B
#define INV_MPU6050_REG_TEMPERATURE 0x41
#define INV_MPU6050_REG_RAW_GYRO 0x43
#define INV_MPU6050_REG_USER_CTRL 0x6A
-#define INV_MPU6050_BIT_FIFO_RST 0x04
-#define INV_MPU6050_BIT_DMP_RST 0x08
-#define INV_MPU6050_BIT_I2C_MST_EN 0x20
-#define INV_MPU6050_BIT_FIFO_EN 0x40
-#define INV_MPU6050_BIT_DMP_EN 0x80
+#define INV_MPU6050_BIT_FIFO_RST 0x04
+#define INV_MPU6050_BIT_DMP_RST 0x08
+#define INV_MPU6050_BIT_I2C_MST_EN 0x20
+#define INV_MPU6050_BIT_FIFO_EN 0x40
+#define INV_MPU6050_BIT_DMP_EN 0x80
#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
-#define INV_MPU6050_BIT_H_RESET 0x80
-#define INV_MPU6050_BIT_SLEEP 0x40
-#define INV_MPU6050_BIT_CLK_MASK 0x7
+#define INV_MPU6050_BIT_H_RESET 0x80
+#define INV_MPU6050_BIT_SLEEP 0x40
+#define INV_MPU6050_BIT_CLK_MASK 0x7
#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
-#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
-#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
#define INV_MPU6050_REG_FIFO_R_W 0x74
@@ -180,10 +180,10 @@ struct inv_mpu6050_state {
/* init parameters */
#define INV_MPU6050_INIT_FIFO_RATE 50
-#define INV_MPU6050_TIME_STAMP_TOR 5
-#define INV_MPU6050_MAX_FIFO_RATE 1000
-#define INV_MPU6050_MIN_FIFO_RATE 4
-#define INV_MPU6050_ONE_K_HZ 1000
+#define INV_MPU6050_TIME_STAMP_TOR 5
+#define INV_MPU6050_MAX_FIFO_RATE 1000
+#define INV_MPU6050_MIN_FIFO_RATE 4
+#define INV_MPU6050_ONE_K_HZ 1000
/* scan element definition */
enum inv_mpu6050_scan {
--
1.8.3.2
next prev parent reply other threads:[~2014-02-05 10:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 10:34 [PATCH 1/3] iio: imu: mpu6050: Move config entry into IMU menu Manuel Stahl
2014-02-05 10:34 ` Manuel Stahl [this message]
2014-02-08 12:29 ` [PATCH 2/3] iio: imu: inv_mpu6050: Fix typo and formatting Jonathan Cameron
2014-02-05 10:34 ` [PATCH 3/3] iio: imu: inv_mpu6050: Add basic support for mpu9150 Manuel Stahl
2014-02-08 12:31 ` Jonathan Cameron
2014-02-10 18:20 ` Ge Gao
2014-02-10 18:39 ` Manuel Stahl
2014-02-11 19:12 ` Ge Gao
2014-02-15 12:28 ` Jonathan Cameron
2014-02-15 13:39 ` Wolfram Sang
2014-02-18 8:34 ` Jonathan Cameron
2014-02-24 16:23 ` Lee Jones
2014-02-24 17:04 ` Wolfram Sang
2014-02-08 12:28 ` [PATCH 1/3] iio: imu: mpu6050: Move config entry into IMU menu Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391596475-21986-2-git-send-email-manuel.stahl@iis.fraunhofer.de \
--to=manuel.stahl@iis.fraunhofer.de \
--cc=ggao@invensense.com \
--cc=jic23@cam.ac.uk \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).