From: Denis CIOCCA <denis.ciocca@st.com>
To: linux-iio@vger.kernel.org
Cc: jic23@kernel.org, Denis Ciocca <denis.ciocca@st.com>
Subject: [PATCH] iio:gyro: bug on L3GD20H gyroscope support
Date: Fri, 14 Feb 2014 15:15:37 +0100 [thread overview]
Message-ID: <1392387337-25324-1-git-send-email-denis.ciocca@st.com> (raw)
The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The correct value of L3GD20H wai is 0xd7 instead of 0xd4.
Dropped support for the sensor.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
---
drivers/iio/gyro/Kconfig | 2 +-
drivers/iio/gyro/st_gyro.h | 1 -
drivers/iio/gyro/st_gyro_core.c | 9 ++++-----
drivers/iio/gyro/st_gyro_i2c.c | 1 -
drivers/iio/gyro/st_gyro_spi.c | 1 -
5 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 41c64a4..ac2d69e 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -70,7 +70,7 @@ config IIO_ST_GYRO_3AXIS
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics gyroscopes:
- L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
+ L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330.
This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index f8f2bf8..c197360 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -19,7 +19,6 @@
#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro"
#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro"
#define L3GD20_GYRO_DEV_NAME "l3gd20"
-#define L3GD20H_GYRO_DEV_NAME "l3gd20h"
#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
#define LSM330_GYRO_DEV_NAME "lsm330_gyro"
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index d53d91a..a8e174a 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -167,11 +167,10 @@ static const struct st_sensors st_gyro_sensors[] = {
.wai = ST_GYRO_2_WAI_EXP,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
- [1] = L3GD20H_GYRO_DEV_NAME,
- [2] = LSM330D_GYRO_DEV_NAME,
- [3] = LSM330DLC_GYRO_DEV_NAME,
- [4] = L3G4IS_GYRO_DEV_NAME,
- [5] = LSM330_GYRO_DEV_NAME,
+ [1] = LSM330D_GYRO_DEV_NAME,
+ [2] = LSM330DLC_GYRO_DEV_NAME,
+ [3] = L3G4IS_GYRO_DEV_NAME,
+ [4] = LSM330_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 16b8b8d..23c12f3 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -55,7 +55,6 @@ static const struct i2c_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME },
- { L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME },
{},
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index 94763e2..b4ad3be 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -54,7 +54,6 @@ static const struct spi_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME },
- { L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME },
{},
--
1.8.5.4
next reply other threads:[~2014-02-14 14:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 14:15 Denis CIOCCA [this message]
2014-02-18 10:26 ` [PATCH] iio:gyro: bug on L3GD20H gyroscope support Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392387337-25324-1-git-send-email-denis.ciocca@st.com \
--to=denis.ciocca@st.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).