From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Peter Meerwald To: linux-iio@vger.kernel.org Cc: jic23@kernel.org, Peter Meerwald Subject: [PATCH 1/4] iio: Add intensity including ir and both modifiers to ABI documentation ex-post Date: Fri, 2 May 2014 17:54:46 +0200 Message-Id: <1399046089-6616-2-git-send-email-pmeerw@pmeerw.net> In-Reply-To: <1399046089-6616-1-git-send-email-pmeerw@pmeerw.net> References: <1399046089-6616-1-git-send-email-pmeerw@pmeerw.net> List-ID: intensity has been in use for a long time but never documented it is beneficial to document what this is supposed to be Signed-off-by: Peter Meerwald --- Documentation/ABI/testing/sysfs-bus-iio | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index ca3d3b7..9669c1f 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -895,6 +895,16 @@ Description: on-chip EEPROM. After power-up or chip reset the device will automatically load the saved configuration. +What: /sys/.../iio:deviceX/in_intensityY_raw +What: /sys/.../iio:deviceX/in_intensityY_ir_raw +What: /sys/.../iio:deviceX/in_intensityY_both_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Unit-less light intensity. Modifiers both and ir indicate + that measurements contains visible and infrared light + components or just infrared light, respectively. + What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time What: /sys/.../iio:deviceX/in_intensity_blue_integration_time -- 1.9.1