* [PATCH v3 0/3] IIO: Add support for rotation from north usage attributes
@ 2014-06-16 22:30 Reyad Attiyat
2014-06-16 22:30 ` [PATCH v3 1/3] iio: documentation: Added documentation " Reyad Attiyat
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Reyad Attiyat @ 2014-06-16 22:30 UTC (permalink / raw)
To: linux-kernel, linux-iio, jic23, srinivas.pandruvada; +Cc: Reyad Attiyat
These patches add support for rotation from north HID usage attributes to
the magnetometer 3d driver.
Changes from v2:
Use devm_kcalloc for all dynamic allocations
Cleanup formatting of if statements
Scan for the usage attributes present then dynamically allocate iio channel and value arrays
Use proper return errors (-EINVAL) and (-ENOMEM)
Reyad Attiyat (3):
iio: documentation: Added documentation for rotation from north usage
attributes
iio: types: Added support for rotation from north usage attributes
iio: hid-sensor-magn-3d: Add support for rotation from north usage
attributes
Documentation/ABI/testing/sysfs-bus-iio | 79 +++++-
drivers/iio/industrialio-core.c | 4 +
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 394 +++++++++++++++++---------
include/linux/iio/types.h | 4 +
4 files changed, 352 insertions(+), 129 deletions(-)
--
1.9.3
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v3 1/3] iio: documentation: Added documentation for rotation from north usage attributes 2014-06-16 22:30 [PATCH v3 0/3] IIO: Add support for rotation from north usage attributes Reyad Attiyat @ 2014-06-16 22:30 ` Reyad Attiyat 2014-06-21 10:57 ` Jonathan Cameron 2014-06-16 22:30 ` [PATCH v3 2/3] iio: types: Added support " Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add " Reyad Attiyat 2 siblings, 1 reply; 6+ messages in thread From: Reyad Attiyat @ 2014-06-16 22:30 UTC (permalink / raw) To: linux-kernel, linux-iio, jic23, srinivas.pandruvada; +Cc: Reyad Attiyat Added documentation for the sysfs attributes added by the rotation from north usage attributes. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> --- Documentation/ABI/testing/sysfs-bus-iio | 79 ++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a9757dc..2837fd9 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -260,6 +260,10 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale KernelVersion: 2.6.35 @@ -447,6 +451,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en @@ -492,6 +504,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en @@ -538,6 +558,14 @@ What: /sys/.../events/in_magn_y_raw_thresh_rising_value What: /sys/.../events/in_magn_y_raw_thresh_falling_value What: /sys/.../events/in_magn_z_raw_thresh_rising_value What: /sys/.../events/in_magn_z_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value What: /sys/.../events/in_voltageY_raw_thresh_rising_value @@ -588,6 +616,18 @@ What: /sys/.../events/in_magn_y_thresh_either_hysteresis What: /sys/.../events/in_magn_z_thresh_rising_hysteresis What: /sys/.../events/in_magn_z_thresh_falling_hysteresis What: /sys/.../events/in_magn_z_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_voltageY_thresh_rising_hysteresis What: /sys/.../events/in_voltageY_thresh_falling_hysteresis What: /sys/.../events/in_voltageY_thresh_either_hysteresis @@ -635,6 +675,14 @@ What: /sys/.../events/in_magn_y_raw_roc_rising_value What: /sys/.../events/in_magn_y_raw_roc_falling_value What: /sys/.../events/in_magn_z_raw_roc_rising_value What: /sys/.../events/in_magn_z_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value What: /sys/.../events/in_voltageY_raw_roc_rising_value @@ -690,6 +738,22 @@ What: /sys/.../events/in_magn_z_thresh_rising_period What: /sys/.../events/in_magn_z_thresh_falling_period What: /sys/.../events/in_magn_z_roc_rising_period What: /sys/.../events/in_magn_z_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period What: /sys/.../events/in_voltageY_supply_thresh_rising_period What: /sys/.../events/in_voltageY_supply_thresh_falling_period What: /sys/.../events/in_voltageY_supply_roc_rising_period @@ -787,6 +851,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en @@ -853,6 +921,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index @@ -926,10 +998,15 @@ Description: seconds. What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw KernelVersion: 3.15 Contact: linux-iio@vger.kernel.org Description: Raw value of quaternion components using a format x y z w. Here x, y, and z component represents the axis about which a rotation will occur and w component represents the - amount of rotation. + amount of rotation. Raw value of rotation from true/magnetic + north measured with or without compensation from tilt sensors -- 1.9.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/3] iio: documentation: Added documentation for rotation from north usage attributes 2014-06-16 22:30 ` [PATCH v3 1/3] iio: documentation: Added documentation " Reyad Attiyat @ 2014-06-21 10:57 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2014-06-21 10:57 UTC (permalink / raw) To: Reyad Attiyat, linux-kernel, linux-iio, srinivas.pandruvada On 16/06/14 23:30, Reyad Attiyat wrote: > Added documentation for the sysfs attributes added by the rotation from north > usage attributes. > > Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Nearly there, but I'd prefer a slight reorganization of the docs. See below. > --- > Documentation/ABI/testing/sysfs-bus-iio | 79 ++++++++++++++++++++++++++++++++- > 1 file changed, 78 insertions(+), 1 deletion(-) > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio > index a9757dc..2837fd9 100644 > --- a/Documentation/ABI/testing/sysfs-bus-iio > +++ b/Documentation/ABI/testing/sysfs-bus-iio > @@ -260,6 +260,10 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale > What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale > What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale > What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale > What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale > What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale > KernelVersion: 2.6.35 > @@ -447,6 +451,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en > What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en > What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en > What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en > What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en > What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en > What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en > @@ -492,6 +504,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en > What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en > What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en > What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en > +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en > What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en > What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en > What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en > @@ -538,6 +558,14 @@ What: /sys/.../events/in_magn_y_raw_thresh_rising_value > What: /sys/.../events/in_magn_y_raw_thresh_falling_value > What: /sys/.../events/in_magn_z_raw_thresh_rising_value > What: /sys/.../events/in_magn_z_raw_thresh_falling_value > +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value > +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value > +What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value > +What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value > What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value > What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value > What: /sys/.../events/in_voltageY_raw_thresh_rising_value > @@ -588,6 +616,18 @@ What: /sys/.../events/in_magn_y_thresh_either_hysteresis > What: /sys/.../events/in_magn_z_thresh_rising_hysteresis > What: /sys/.../events/in_magn_z_thresh_falling_hysteresis > What: /sys/.../events/in_magn_z_thresh_either_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis > +What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis > +What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis > +What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis > What: /sys/.../events/in_voltageY_thresh_rising_hysteresis > What: /sys/.../events/in_voltageY_thresh_falling_hysteresis > What: /sys/.../events/in_voltageY_thresh_either_hysteresis > @@ -635,6 +675,14 @@ What: /sys/.../events/in_magn_y_raw_roc_rising_value > What: /sys/.../events/in_magn_y_raw_roc_falling_value > What: /sys/.../events/in_magn_z_raw_roc_rising_value > What: /sys/.../events/in_magn_z_raw_roc_falling_value > +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value > +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value > +What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value > +What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value > What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value > What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value > What: /sys/.../events/in_voltageY_raw_roc_rising_value > @@ -690,6 +738,22 @@ What: /sys/.../events/in_magn_z_thresh_rising_period > What: /sys/.../events/in_magn_z_thresh_falling_period > What: /sys/.../events/in_magn_z_roc_rising_period > What: /sys/.../events/in_magn_z_roc_falling_period > +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period > +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period > +What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period > +What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period > +What: /sys/.../events/in_rot_from_north_true_thresh_rising_period > +What: /sys/.../events/in_rot_from_north_true_thresh_falling_period > +What: /sys/.../events/in_rot_from_north_true_roc_rising_period > +What: /sys/.../events/in_rot_from_north_true_roc_falling_period > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period > +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period > +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period > What: /sys/.../events/in_voltageY_supply_thresh_rising_period > What: /sys/.../events/in_voltageY_supply_thresh_falling_period > What: /sys/.../events/in_voltageY_supply_roc_rising_period > @@ -787,6 +851,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en > What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en > What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en > What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en > What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en > What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en > What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en > @@ -853,6 +921,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index > What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index > What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index > What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index > +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index > What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index > What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index > What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index > @@ -926,10 +998,15 @@ Description: > seconds. > > What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw > KernelVersion: 3.15 > Contact: linux-iio@vger.kernel.org > Description: > Raw value of quaternion components using a format > x y z w. Here x, y, and z component represents the axis about > which a rotation will occur and w component represents the > - amount of rotation. > + amount of rotation. Raw value of rotation from true/magnetic > + north measured with or without compensation from tilt sensors > Don't combine it with the quaternion description. It just adds confusion. Please give these _raw entries their own section in the docs. ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 2/3] iio: types: Added support for rotation from north usage attributes 2014-06-16 22:30 [PATCH v3 0/3] IIO: Add support for rotation from north usage attributes Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 1/3] iio: documentation: Added documentation " Reyad Attiyat @ 2014-06-16 22:30 ` Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add " Reyad Attiyat 2 siblings, 0 replies; 6+ messages in thread From: Reyad Attiyat @ 2014-06-16 22:30 UTC (permalink / raw) To: linux-kernel, linux-iio, jic23, srinivas.pandruvada; +Cc: Reyad Attiyat Added the rotation from north usage attributes to the iio modifier enum and to the iio modifier names array. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> --- drivers/iio/industrialio-core.c | 4 ++++ include/linux/iio/types.h | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 4b1f375..af3e76d 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -87,6 +87,10 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_QUATERNION] = "quaternion", [IIO_MOD_TEMP_AMBIENT] = "ambient", [IIO_MOD_TEMP_OBJECT] = "object", + [IIO_MOD_NORTH_MAGN] = "from_north_magnetic", + [IIO_MOD_NORTH_TRUE] = "from_north_true", + [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp", + [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp", }; /* relies on pairs of these shared then separate */ diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index d480631..d09c40d 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -56,6 +56,10 @@ enum iio_modifier { IIO_MOD_QUATERNION, IIO_MOD_TEMP_AMBIENT, IIO_MOD_TEMP_OBJECT, + IIO_MOD_NORTH_MAGN, + IIO_MOD_NORTH_TRUE, + IIO_MOD_NORTH_MAGN_TILT_COMP, + IIO_MOD_NORTH_TRUE_TILT_COMP }; enum iio_event_type { -- 1.9.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add support for rotation from north usage attributes 2014-06-16 22:30 [PATCH v3 0/3] IIO: Add support for rotation from north usage attributes Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 1/3] iio: documentation: Added documentation " Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 2/3] iio: types: Added support " Reyad Attiyat @ 2014-06-16 22:30 ` Reyad Attiyat 2014-06-21 11:19 ` Jonathan Cameron 2 siblings, 1 reply; 6+ messages in thread From: Reyad Attiyat @ 2014-06-16 22:30 UTC (permalink / raw) To: linux-kernel, linux-iio, jic23, srinivas.pandruvada; +Cc: Reyad Attiyat Added the ability for this driver to scan for a range of hid usage attributes. This allows for dynamic creation of iio channels such as rotation from north and/or magnetic flux axises (X, Y, Z). Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> --- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 394 +++++++++++++++++--------- 1 file changed, 266 insertions(+), 128 deletions(-) diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 41cf29e..73e1272 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -35,6 +35,10 @@ enum magn_3d_channel { CHANNEL_SCAN_INDEX_X, CHANNEL_SCAN_INDEX_Y, CHANNEL_SCAN_INDEX_Z, + CHANNEL_SCAN_INDEX_NORTH_MAGN, + CHANNEL_SCAN_INDEX_NORTH_TRUE, + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP, + CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP, MAGN_3D_CHANNEL_MAX, }; @@ -42,63 +46,47 @@ struct magn_3d_state { struct hid_sensor_hub_callbacks callbacks; struct hid_sensor_common common_attributes; struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX]; - u32 magn_val[MAGN_3D_CHANNEL_MAX]; + u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX]; + u32 *iio_val; int scale_pre_decml; int scale_post_decml; int scale_precision; int value_offset; }; -static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = { - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS, - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS -}; -/* Channel definitions */ -static const struct iio_chan_spec magn_3d_channels[] = { - { - .type = IIO_MAGN, - .modified = 1, - .channel2 = IIO_MOD_X, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ) | - BIT(IIO_CHAN_INFO_HYSTERESIS), - .scan_index = CHANNEL_SCAN_INDEX_X, - }, { - .type = IIO_MAGN, - .modified = 1, - .channel2 = IIO_MOD_Y, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ) | - BIT(IIO_CHAN_INFO_HYSTERESIS), - .scan_index = CHANNEL_SCAN_INDEX_Y, - }, { - .type = IIO_MAGN, - .modified = 1, - .channel2 = IIO_MOD_Z, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ) | - BIT(IIO_CHAN_INFO_HYSTERESIS), - .scan_index = CHANNEL_SCAN_INDEX_Z, +/* Find index into magn_3d_state magn[] and magn_val_addr[] from HID Usage */ +static int magn_3d_usage_id_to_chan_index(unsigned usage_id){ + int offset; + + switch (usage_id) { + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: + offset = CHANNEL_SCAN_INDEX_X; + break; + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: + offset = CHANNEL_SCAN_INDEX_Y; + break; + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: + offset = CHANNEL_SCAN_INDEX_Z; + break; + case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: + offset = CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP; + break; + case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: + offset = CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP; + break; + case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: + offset = CHANNEL_SCAN_INDEX_NORTH_MAGN; + break; + case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: + offset = CHANNEL_SCAN_INDEX_NORTH_TRUE; + break; + default: + offset = -EINVAL; + break; } -}; -/* Adjust channel real bits based on report descriptor */ -static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, - int channel, int size) -{ - channels[channel].scan_type.sign = 's'; - /* Real storage bits will change based on the report desc. */ - channels[channel].scan_type.realbits = size * 8; - /* Maximum size of a sample to capture is u32 */ - channels[channel].scan_type.storagebits = sizeof(u32) * 8; + return offset; } /* Channel read_raw handler */ @@ -109,11 +97,14 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, { struct magn_3d_state *magn_state = iio_priv(indio_dev); int report_id = -1; - u32 address; + unsigned usage_id; + int chan_index = -1; int ret; int ret_type; s32 poll_value; + dev_dbg(&indio_dev->dev, "magn_3d_read_raw\n"); + *val = 0; *val2 = 0; switch (mask) { @@ -126,13 +117,17 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, hid_sensor_power_state(&magn_state->common_attributes, true); msleep_interruptible(poll_value * 2); + usage_id = chan->address; + chan_index = magn_3d_usage_id_to_chan_index(usage_id); + if (chan_index < 0) + return -EINVAL; + report_id = - magn_state->magn[chan->scan_index].report_id; - address = magn_3d_addresses[chan->scan_index]; + magn_state->magn[chan_index].report_id; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( magn_state->common_attributes.hsdev, - HID_USAGE_SENSOR_COMPASS_3D, address, + HID_USAGE_SENSOR_COMPASS_3D, usage_id, report_id); else { *val = 0; @@ -221,12 +216,13 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev, dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n"); if (atomic_read(&magn_state->common_attributes.data_ready)) hid_sensor_push_data(indio_dev, - magn_state->magn_val, - sizeof(magn_state->magn_val)); + &(magn_state->iio_val), + sizeof(magn_state->iio_val)); return 0; } + /* Capture samples in local storage */ static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, unsigned usage_id, @@ -236,51 +232,138 @@ static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, struct iio_dev *indio_dev = platform_get_drvdata(priv); struct magn_3d_state *magn_state = iio_priv(indio_dev); int offset; - int ret = -EINVAL; + u32 *magn_val; + int ret = 0; - switch (usage_id) { + offset = magn_3d_usage_id_to_chan_index(usage_id); + if (offset < 0) + return -EINVAL; + + magn_val = magn_state->magn_val_addr[offset]; + if (!magn_val) + return -EINVAL; + + *(magn_val) = *(u32 *)raw_data; + + return ret; +} + +/* Setup the iio_chan_spec for HID Usage ID */ +static int magn_3d_setup_iio_chan(unsigned attr_usage_id, + s32 size, + struct iio_chan_spec *channel) +{ + + channel->modified = 1; + channel->address = attr_usage_id; + + switch (attr_usage_id){ + case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: + channel->type = IIO_ROT; + channel->channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP; + break; + case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: + channel->type = IIO_ROT; + channel->channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP; + break; + case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: + channel->type = IIO_ROT; + channel->channel2 = IIO_MOD_NORTH_MAGN; + break; + case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: + channel->type = IIO_ROT; + channel->channel2 = IIO_MOD_NORTH_TRUE; + break; case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: + channel->type = IIO_MAGN; + channel->channel2 = IIO_MOD_X; + break; case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: + channel->type = IIO_MAGN; + channel->channel2 = IIO_MOD_Y; + break; case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: - offset = usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS; - magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] = - *(u32 *)raw_data; - ret = 0; - break; - default: + channel->type = IIO_MAGN; + channel->channel2 = IIO_MOD_Z; break; + default: + return -EINVAL; } - return ret; + channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + channel->info_mask_shared_by_type = + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS); + + channel->scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + channel->scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + channel->scan_type.storagebits = sizeof(u32) * 8; + + + return 0; } -/* Parse report which is specific to an usage id*/ -static int magn_3d_parse_report(struct platform_device *pdev, - struct hid_sensor_hub_device *hsdev, - struct iio_chan_spec *channels, +/* Scan a HID report for a range of attribute usages. + * Returns the count of attribute usages found. + */ +static int magn_3d_scan_range_usage_ids(struct hid_sensor_hub_device *hsdev, unsigned usage_id, + unsigned start_id, + unsigned end_id, struct magn_3d_state *st) { + int count = 0; int ret; - int i; + int id; - for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) { + for (id = start_id; id <= end_id; id++) { + int i; + + i = magn_3d_usage_id_to_chan_index(id); + if(i < 0) + continue; + + /* Check if usage attribute exists in the sensor hub device */ ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, usage_id, - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS + i, - &st->magn[CHANNEL_SCAN_INDEX_X + i]); - if (ret < 0) - break; - magn_3d_adjust_channel_bit_mask(channels, - CHANNEL_SCAN_INDEX_X + i, - st->magn[CHANNEL_SCAN_INDEX_X + i].size); + id, + &(st->magn[i])); + if (ret == 0) + count++; + } + + return count; +} + +/* Parse the HID report and return number of reports found */ +static int magn_3d_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + int* attribute_count, + struct magn_3d_state *st) +{ + int usage_count = 0; + + usage_count += magn_3d_scan_range_usage_ids(hsdev, usage_id, + HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, + HID_USAGE_SENSOR_ORIENT_TRUE_NORTH, + st); + + usage_count += magn_3d_scan_range_usage_ids(hsdev, usage_id, + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS, + st); + + if (attribute_count != NULL && usage_count > 0) { + *attribute_count = usage_count; + } else { + return -EINVAL; } - dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n", - st->magn[0].index, - st->magn[0].report_id, - st->magn[1].index, st->magn[1].report_id, - st->magn[2].index, st->magn[2].report_id); st->scale_precision = hid_sensor_format_scale( HID_USAGE_SENSOR_COMPASS_3D, @@ -299,54 +382,60 @@ static int magn_3d_parse_report(struct platform_device *pdev, st->common_attributes.sensitivity.report_id); } - return ret; + dev_dbg(&pdev->dev, "magn_3d_parse_reports found %d attribute usages\n", usage_count); + + return 0; } -/* Function to initialize the processing for usage id */ -static int hid_magn_3d_probe(struct platform_device *pdev) +/* Setup iio channels */ +static int magn_3d_setup_iio_channels(struct platform_device *pdev, + struct iio_dev *indio_dev, + unsigned usage_id, + int attr_count, + struct magn_3d_state *st) { - int ret = 0; + int ret; static char *name = "magn_3d"; - struct iio_dev *indio_dev; - struct magn_3d_state *magn_state; - struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_chan_spec *channels; + int chan_count = 0; + int i; - indio_dev = devm_iio_device_alloc(&pdev->dev, - sizeof(struct magn_3d_state)); - if (indio_dev == NULL) + /* Allocate IIO channels struct */ + channels = devm_kcalloc(&pdev->dev, + attr_count, + sizeof(struct iio_chan_spec), + GFP_KERNEL); + if (!channels) { + dev_err(&pdev->dev, "failed to allocate memory for iio channels\n"); return -ENOMEM; - - platform_set_drvdata(pdev, indio_dev); - - magn_state = iio_priv(indio_dev); - magn_state->common_attributes.hsdev = hsdev; - magn_state->common_attributes.pdev = pdev; - - ret = hid_sensor_parse_common_attributes(hsdev, - HID_USAGE_SENSOR_COMPASS_3D, - &magn_state->common_attributes); - if (ret) { - dev_err(&pdev->dev, "failed to setup common attributes\n"); - return ret; } - channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels), - GFP_KERNEL); - if (!channels) { - dev_err(&pdev->dev, "failed to duplicate channels\n"); + /* Allocate IIO values array */ + st->iio_val = devm_kcalloc(&pdev->dev, + attr_count, + sizeof(u32), + GFP_KERNEL); + if (!(st->iio_val)) { + dev_err(&pdev->dev, "failed to allocate memory for iio value\n"); return -ENOMEM; } - ret = magn_3d_parse_report(pdev, hsdev, channels, - HID_USAGE_SENSOR_COMPASS_3D, magn_state); - if (ret) { - dev_err(&pdev->dev, "failed to setup attributes\n"); - goto error_free_dev_mem; + /* Setup each IIO channel that is present */ + for (i = 0; i < MAGN_3D_CHANNEL_MAX && chan_count < attr_count; i++){ + u32 attr = st->magn[i].attrib_id; + s32 size = st->magn[i].size; + + if (attr != 0 && size > 0) { + ret = magn_3d_setup_iio_chan(attr, size, &(channels[chan_count])); + if (ret == 0) { + chan_count++; + st->magn_val_addr[i] = &(st->iio_val[chan_count]); + } + } } indio_dev->channels = channels; - indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels); + indio_dev->num_channels = chan_count; indio_dev->dev.parent = &pdev->dev; indio_dev->info = &magn_3d_info; indio_dev->name = name; @@ -358,9 +447,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); goto error_free_dev_mem; } - atomic_set(&magn_state->common_attributes.data_ready, 0); + atomic_set(&st->common_attributes.data_ready, 0); ret = hid_sensor_setup_trigger(indio_dev, name, - &magn_state->common_attributes); + &st->common_attributes); if (ret < 0) { dev_err(&pdev->dev, "trigger setup failed\n"); goto error_unreg_buffer_funcs; @@ -372,6 +461,65 @@ static int hid_magn_3d_probe(struct platform_device *pdev) goto error_remove_trigger; } + return 0; + +error_remove_trigger: + hid_sensor_remove_trigger(&st->common_attributes); +error_unreg_buffer_funcs: + iio_triggered_buffer_cleanup(indio_dev); +error_free_dev_mem: + devm_kfree(&pdev->dev, (void*) indio_dev->channels); + devm_kfree(&pdev->dev, (void*) st->iio_val); + + return -EINVAL; +} + +/* Function to initialize the processing for usage id */ +static int hid_magn_3d_probe(struct platform_device *pdev) +{ + int ret; + struct iio_dev *indio_dev; + struct magn_3d_state *magn_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + int report_attr_count = 0; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct magn_3d_state)); + if (indio_dev == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + + magn_state = iio_priv(indio_dev); + magn_state->common_attributes.hsdev = hsdev; + magn_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_COMPASS_3D, + &magn_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + ret = magn_3d_parse_report(pdev, hsdev, + HID_USAGE_SENSOR_COMPASS_3D, + &report_attr_count, + magn_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + return ret; + } + + ret = magn_3d_setup_iio_channels(pdev, indio_dev, + HID_USAGE_SENSOR_COMPASS_3D, + report_attr_count, + magn_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup iio channel\n"); + return ret; + } + magn_state->callbacks.send_event = magn_3d_proc_event; magn_state->callbacks.capture_sample = magn_3d_capture_sample; magn_state->callbacks.pdev = pdev; @@ -379,20 +527,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev) &magn_state->callbacks); if (ret < 0) { dev_err(&pdev->dev, "callback reg failed\n"); - goto error_iio_unreg; } return ret; - -error_iio_unreg: - iio_device_unregister(indio_dev); -error_remove_trigger: - hid_sensor_remove_trigger(&magn_state->common_attributes); -error_unreg_buffer_funcs: - iio_triggered_buffer_cleanup(indio_dev); -error_free_dev_mem: - kfree(indio_dev->channels); - return ret; } /* Function to deinitialize the processing for usage id */ @@ -406,7 +543,8 @@ static int hid_magn_3d_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); hid_sensor_remove_trigger(&magn_state->common_attributes); iio_triggered_buffer_cleanup(indio_dev); - kfree(indio_dev->channels); + devm_kfree(&pdev->dev, (void*) magn_state->iio_val); + devm_kfree(&pdev->dev, (void*) indio_dev->channels); return 0; } -- 1.9.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add support for rotation from north usage attributes 2014-06-16 22:30 ` [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add " Reyad Attiyat @ 2014-06-21 11:19 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2014-06-21 11:19 UTC (permalink / raw) To: Reyad Attiyat, linux-kernel, linux-iio, srinivas.pandruvada On 16/06/14 23:30, Reyad Attiyat wrote: > Added the ability for this driver to scan for a range of hid usage attributes. > This allows for dynamic creation of iio channels such as rotation from north > and/or magnetic flux axises (X, Y, Z). > > Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Hi Reyad, I'm afraid I hadn't taken as close a look at this as I should for previous versions. There are some nasty bugs introduced by your refactoring. The fundamental approach is fine, but you've moved more things than make sense in some cases. With hind sight perhaps it would have been possible to break this patch up into a series of small easily reviewed steps. Anyhow, take a hard look at the error paths in the code as someone of them are thorougly broken. The channel setup function does an awful lot more than setup the channels and it should not do so. Moving other stuff in there makes the code harder to follow and is responsible for at least a few bugs that otherwise would not have occured. Thanks, Jonathan > --- > drivers/iio/magnetometer/hid-sensor-magn-3d.c | 394 +++++++++++++++++--------- > 1 file changed, 266 insertions(+), 128 deletions(-) > > diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c > index 41cf29e..73e1272 100644 > --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c > +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c > @@ -35,6 +35,10 @@ enum magn_3d_channel { > CHANNEL_SCAN_INDEX_X, > CHANNEL_SCAN_INDEX_Y, > CHANNEL_SCAN_INDEX_Z, > + CHANNEL_SCAN_INDEX_NORTH_MAGN, > + CHANNEL_SCAN_INDEX_NORTH_TRUE, > + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP, > + CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP, > MAGN_3D_CHANNEL_MAX, > }; > > @@ -42,63 +46,47 @@ struct magn_3d_state { > struct hid_sensor_hub_callbacks callbacks; > struct hid_sensor_common common_attributes; > struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX]; > - u32 magn_val[MAGN_3D_CHANNEL_MAX]; > + u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX]; > + u32 *iio_val; > int scale_pre_decml; > int scale_post_decml; > int scale_precision; > int value_offset; > }; > > -static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = { > - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, > - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS, > - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS > -}; > > -/* Channel definitions */ > -static const struct iio_chan_spec magn_3d_channels[] = { > - { > - .type = IIO_MAGN, > - .modified = 1, > - .channel2 = IIO_MOD_X, > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | > - BIT(IIO_CHAN_INFO_SCALE) | > - BIT(IIO_CHAN_INFO_SAMP_FREQ) | > - BIT(IIO_CHAN_INFO_HYSTERESIS), > - .scan_index = CHANNEL_SCAN_INDEX_X, > - }, { > - .type = IIO_MAGN, > - .modified = 1, > - .channel2 = IIO_MOD_Y, > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | > - BIT(IIO_CHAN_INFO_SCALE) | > - BIT(IIO_CHAN_INFO_SAMP_FREQ) | > - BIT(IIO_CHAN_INFO_HYSTERESIS), > - .scan_index = CHANNEL_SCAN_INDEX_Y, > - }, { > - .type = IIO_MAGN, > - .modified = 1, > - .channel2 = IIO_MOD_Z, > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | > - BIT(IIO_CHAN_INFO_SCALE) | > - BIT(IIO_CHAN_INFO_SAMP_FREQ) | > - BIT(IIO_CHAN_INFO_HYSTERESIS), > - .scan_index = CHANNEL_SCAN_INDEX_Z, > +/* Find index into magn_3d_state magn[] and magn_val_addr[] from HID Usage */ > +static int magn_3d_usage_id_to_chan_index(unsigned usage_id){ > + int offset; > + > + switch (usage_id) { > + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: > + offset = CHANNEL_SCAN_INDEX_X; > + break; > + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: > + offset = CHANNEL_SCAN_INDEX_Y; > + break; > + case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: > + offset = CHANNEL_SCAN_INDEX_Z; > + break; > + case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: > + offset = CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP; > + break; > + case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: > + offset = CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP; > + break; > + case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: > + offset = CHANNEL_SCAN_INDEX_NORTH_MAGN; > + break; > + case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: > + offset = CHANNEL_SCAN_INDEX_NORTH_TRUE; > + break; > + default: > + offset = -EINVAL; > + break; > } > -}; > > -/* Adjust channel real bits based on report descriptor */ > -static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, > - int channel, int size) > -{ > - channels[channel].scan_type.sign = 's'; > - /* Real storage bits will change based on the report desc. */ > - channels[channel].scan_type.realbits = size * 8; > - /* Maximum size of a sample to capture is u32 */ > - channels[channel].scan_type.storagebits = sizeof(u32) * 8; > + return offset; > } > > /* Channel read_raw handler */ > @@ -109,11 +97,14 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, > { > struct magn_3d_state *magn_state = iio_priv(indio_dev); > int report_id = -1; > - u32 address; > + unsigned usage_id; > + int chan_index = -1; > int ret; > int ret_type; > s32 poll_value; > > + dev_dbg(&indio_dev->dev, "magn_3d_read_raw\n"); > + > *val = 0; > *val2 = 0; > switch (mask) { > @@ -126,13 +117,17 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, > hid_sensor_power_state(&magn_state->common_attributes, true); > msleep_interruptible(poll_value * 2); > > + usage_id = chan->address; > + chan_index = magn_3d_usage_id_to_chan_index(usage_id); > + if (chan_index < 0) > + return -EINVAL; > + > report_id = > - magn_state->magn[chan->scan_index].report_id; > - address = magn_3d_addresses[chan->scan_index]; > + magn_state->magn[chan_index].report_id; > if (report_id >= 0) > *val = sensor_hub_input_attr_get_raw_value( > magn_state->common_attributes.hsdev, > - HID_USAGE_SENSOR_COMPASS_3D, address, > + HID_USAGE_SENSOR_COMPASS_3D, usage_id, > report_id); > else { > *val = 0; > @@ -221,12 +216,13 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev, > dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n"); > if (atomic_read(&magn_state->common_attributes.data_ready)) > hid_sensor_push_data(indio_dev, > - magn_state->magn_val, > - sizeof(magn_state->magn_val)); > + &(magn_state->iio_val), > + sizeof(magn_state->iio_val)); > > return 0; > } > > + > /* Capture samples in local storage */ > static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, > unsigned usage_id, > @@ -236,51 +232,138 @@ static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev, > struct iio_dev *indio_dev = platform_get_drvdata(priv); > struct magn_3d_state *magn_state = iio_priv(indio_dev); > int offset; > - int ret = -EINVAL; > + u32 *magn_val; > + int ret = 0; > > - switch (usage_id) { > + offset = magn_3d_usage_id_to_chan_index(usage_id); > + if (offset < 0) > + return -EINVAL; > + > + magn_val = magn_state->magn_val_addr[offset]; > + if (!magn_val) > + return -EINVAL; > + > + *(magn_val) = *(u32 *)raw_data; > + > + return ret; > +} > + > +/* Setup the iio_chan_spec for HID Usage ID */ > +static int magn_3d_setup_iio_chan(unsigned attr_usage_id, > + s32 size, > + struct iio_chan_spec *channel) > +{ > + > + channel->modified = 1; > + channel->address = attr_usage_id; > + > + switch (attr_usage_id){ > + case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH: > + channel->type = IIO_ROT; > + channel->channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP; > + break; > + case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH: > + channel->type = IIO_ROT; > + channel->channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP; > + break; > + case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH: > + channel->type = IIO_ROT; > + channel->channel2 = IIO_MOD_NORTH_MAGN; > + break; > + case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH: > + channel->type = IIO_ROT; > + channel->channel2 = IIO_MOD_NORTH_TRUE; > + break; > case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS: > + channel->type = IIO_MAGN; > + channel->channel2 = IIO_MOD_X; > + break; > case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS: > + channel->type = IIO_MAGN; > + channel->channel2 = IIO_MOD_Y; > + break; > case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS: > - offset = usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS; > - magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] = > - *(u32 *)raw_data; > - ret = 0; > - break; > - default: > + channel->type = IIO_MAGN; > + channel->channel2 = IIO_MOD_Z; > break; > + default: > + return -EINVAL; > } > > - return ret; > + channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); > + channel->info_mask_shared_by_type = > + BIT(IIO_CHAN_INFO_OFFSET) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | > + BIT(IIO_CHAN_INFO_HYSTERESIS); > + > + channel->scan_type.sign = 's'; > + /* Real storage bits will change based on the report desc. */ > + channel->scan_type.realbits = size * 8; > + /* Maximum size of a sample to capture is u32 */ > + channel->scan_type.storagebits = sizeof(u32) * 8; > + > + One blank line only here please. > + return 0; > } > > -/* Parse report which is specific to an usage id*/ > -static int magn_3d_parse_report(struct platform_device *pdev, > - struct hid_sensor_hub_device *hsdev, > - struct iio_chan_spec *channels, Please fix the multiline comment syntax. Even better, use kernel-doc formatting. > +/* Scan a HID report for a range of attribute usages. > + * Returns the count of attribute usages found. > + */ > +static int magn_3d_scan_range_usage_ids(struct hid_sensor_hub_device *hsdev, > unsigned usage_id, > + unsigned start_id, > + unsigned end_id, > struct magn_3d_state *st) > { > + int count = 0; > int ret; > - int i; > + int id; > > - for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) { > + for (id = start_id; id <= end_id; id++) { > + int i; > + > + i = magn_3d_usage_id_to_chan_index(id); > + if(i < 0) > + continue; > + > + /* Check if usage attribute exists in the sensor hub device */ > ret = sensor_hub_input_get_attribute_info(hsdev, > HID_INPUT_REPORT, > usage_id, > - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS + i, > - &st->magn[CHANNEL_SCAN_INDEX_X + i]); > - if (ret < 0) > - break; > - magn_3d_adjust_channel_bit_mask(channels, > - CHANNEL_SCAN_INDEX_X + i, > - st->magn[CHANNEL_SCAN_INDEX_X + i].size); > + id, > + &(st->magn[i])); > + if (ret == 0) > + count++; > + } > + > + return count; > +} > + > +/* Parse the HID report and return number of reports found */ > +static int magn_3d_parse_report(struct platform_device *pdev, > + struct hid_sensor_hub_device *hsdev, > + unsigned usage_id, > + int* attribute_count, > + struct magn_3d_state *st) > +{ > + int usage_count = 0; > + > + usage_count += magn_3d_scan_range_usage_ids(hsdev, usage_id, > + HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH, > + HID_USAGE_SENSOR_ORIENT_TRUE_NORTH, > + st); > + > + usage_count += magn_3d_scan_range_usage_ids(hsdev, usage_id, > + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS, > + HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS, > + st); > + > + if (attribute_count != NULL && usage_count > 0) { > + *attribute_count = usage_count; > + } else { > + return -EINVAL; > } > - dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n", > - st->magn[0].index, > - st->magn[0].report_id, > - st->magn[1].index, st->magn[1].report_id, > - st->magn[2].index, st->magn[2].report_id); > > st->scale_precision = hid_sensor_format_scale( > HID_USAGE_SENSOR_COMPASS_3D, > @@ -299,54 +382,60 @@ static int magn_3d_parse_report(struct platform_device *pdev, > st->common_attributes.sensitivity.report_id); > } > > - return ret; > + dev_dbg(&pdev->dev, "magn_3d_parse_reports found %d attribute usages\n", usage_count); > + > + return 0; > } > > -/* Function to initialize the processing for usage id */ > -static int hid_magn_3d_probe(struct platform_device *pdev) > +/* Setup iio channels */ Keep this function much more foccused on just setting up the channels. Right now it's introduced a whole load of bugs into your remove because you aren't unwinding what this does in the error paths. So this function should fill the channels array and return how many there are. Nothing else. All the other setups stuff that was previously in the probe function should go back there and be correctly unwound on any errors (as it previously was). This is one of those annoying cases where diff is making it hard to see what the reorganization was. Oh well. > +static int magn_3d_setup_iio_channels(struct platform_device *pdev, > + struct iio_dev *indio_dev, > + unsigned usage_id, > + int attr_count, > + struct magn_3d_state *st) > { > - int ret = 0; > + int ret; > static char *name = "magn_3d"; > - struct iio_dev *indio_dev; > - struct magn_3d_state *magn_state; > - struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; > struct iio_chan_spec *channels; > + int chan_count = 0; > + int i; > > - indio_dev = devm_iio_device_alloc(&pdev->dev, > - sizeof(struct magn_3d_state)); > - if (indio_dev == NULL) > + /* Allocate IIO channels struct */ > + channels = devm_kcalloc(&pdev->dev, > + attr_count, > + sizeof(struct iio_chan_spec), > + GFP_KERNEL); > + if (!channels) { > + dev_err(&pdev->dev, "failed to allocate memory for iio channels\n"); > return -ENOMEM; > - > - platform_set_drvdata(pdev, indio_dev); > - > - magn_state = iio_priv(indio_dev); > - magn_state->common_attributes.hsdev = hsdev; > - magn_state->common_attributes.pdev = pdev; > - > - ret = hid_sensor_parse_common_attributes(hsdev, > - HID_USAGE_SENSOR_COMPASS_3D, > - &magn_state->common_attributes); > - if (ret) { > - dev_err(&pdev->dev, "failed to setup common attributes\n"); > - return ret; > } > > - channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels), > - GFP_KERNEL); > - if (!channels) { > - dev_err(&pdev->dev, "failed to duplicate channels\n"); > + /* Allocate IIO values array */ > + st->iio_val = devm_kcalloc(&pdev->dev, > + attr_count, > + sizeof(u32), > + GFP_KERNEL); > + if (!(st->iio_val)) { > + dev_err(&pdev->dev, "failed to allocate memory for iio value\n"); > return -ENOMEM; > } > > - ret = magn_3d_parse_report(pdev, hsdev, channels, > - HID_USAGE_SENSOR_COMPASS_3D, magn_state); > - if (ret) { > - dev_err(&pdev->dev, "failed to setup attributes\n"); > - goto error_free_dev_mem; > + /* Setup each IIO channel that is present */ > + for (i = 0; i < MAGN_3D_CHANNEL_MAX && chan_count < attr_count; i++){ > + u32 attr = st->magn[i].attrib_id; > + s32 size = st->magn[i].size; > + > + if (attr != 0 && size > 0) { > + ret = magn_3d_setup_iio_chan(attr, size, &(channels[chan_count])); > + if (ret == 0) { > + chan_count++; > + st->magn_val_addr[i] = &(st->iio_val[chan_count]); > + } > + } > } > > indio_dev->channels = channels; > - indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels); > + indio_dev->num_channels = chan_count; > indio_dev->dev.parent = &pdev->dev; > indio_dev->info = &magn_3d_info; > indio_dev->name = name; > @@ -358,9 +447,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev) > dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); > goto error_free_dev_mem; > } > - atomic_set(&magn_state->common_attributes.data_ready, 0); > + atomic_set(&st->common_attributes.data_ready, 0); > ret = hid_sensor_setup_trigger(indio_dev, name, > - &magn_state->common_attributes); > + &st->common_attributes); > if (ret < 0) { > dev_err(&pdev->dev, "trigger setup failed\n"); > goto error_unreg_buffer_funcs; > @@ -372,6 +461,65 @@ static int hid_magn_3d_probe(struct platform_device *pdev) > goto error_remove_trigger; > } > > + return 0; > + > +error_remove_trigger: > + hid_sensor_remove_trigger(&st->common_attributes); > +error_unreg_buffer_funcs: > + iio_triggered_buffer_cleanup(indio_dev); > +error_free_dev_mem: These (as in the remove below) are unneeded. Please take a look at the devm docs if you don't understand why. > + devm_kfree(&pdev->dev, (void*) indio_dev->channels); > + devm_kfree(&pdev->dev, (void*) st->iio_val); > + > + return -EINVAL; > +} > + > +/* Function to initialize the processing for usage id */ > +static int hid_magn_3d_probe(struct platform_device *pdev) > +{ > + int ret; > + struct iio_dev *indio_dev; > + struct magn_3d_state *magn_state; > + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; > + int report_attr_count = 0; > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, > + sizeof(struct magn_3d_state)); > + if (indio_dev == NULL) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, indio_dev); > + > + magn_state = iio_priv(indio_dev); > + magn_state->common_attributes.hsdev = hsdev; > + magn_state->common_attributes.pdev = pdev; > + > + ret = hid_sensor_parse_common_attributes(hsdev, > + HID_USAGE_SENSOR_COMPASS_3D, > + &magn_state->common_attributes); > + if (ret) { > + dev_err(&pdev->dev, "failed to setup common attributes\n"); > + return ret; > + } > + > + ret = magn_3d_parse_report(pdev, hsdev, > + HID_USAGE_SENSOR_COMPASS_3D, > + &report_attr_count, > + magn_state); > + if (ret) { > + dev_err(&pdev->dev, "failed to setup attributes\n"); > + return ret; > + } > + > + ret = magn_3d_setup_iio_channels(pdev, indio_dev, > + HID_USAGE_SENSOR_COMPASS_3D, > + report_attr_count, > + magn_state); > + if (ret) { > + dev_err(&pdev->dev, "failed to setup iio channel\n"); > + return ret; > + } > + > magn_state->callbacks.send_event = magn_3d_proc_event; > magn_state->callbacks.capture_sample = magn_3d_capture_sample; > magn_state->callbacks.pdev = pdev; > @@ -379,20 +527,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev) > &magn_state->callbacks); > if (ret < 0) { > dev_err(&pdev->dev, "callback reg failed\n"); You need to unwind everything in the channel setup code here. Nothing unregisters the device for starters. > - goto error_iio_unreg; > } > > return ret; > - > -error_iio_unreg: > - iio_device_unregister(indio_dev); > -error_remove_trigger: > - hid_sensor_remove_trigger(&magn_state->common_attributes); > -error_unreg_buffer_funcs: > - iio_triggered_buffer_cleanup(indio_dev); > -error_free_dev_mem: > - kfree(indio_dev->channels); > - return ret; > } > > /* Function to deinitialize the processing for usage id */ > @@ -406,7 +543,8 @@ static int hid_magn_3d_remove(struct platform_device *pdev) > iio_device_unregister(indio_dev); > hid_sensor_remove_trigger(&magn_state->common_attributes); > iio_triggered_buffer_cleanup(indio_dev); > - kfree(indio_dev->channels); > + devm_kfree(&pdev->dev, (void*) magn_state->iio_val); > + devm_kfree(&pdev->dev, (void*) indio_dev->channels); You don't need these here. The whole point about devm resource management is that they will get released on remove on the device without it needing to be explicitly done. > > return 0; > } > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-06-21 11:17 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-06-16 22:30 [PATCH v3 0/3] IIO: Add support for rotation from north usage attributes Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 1/3] iio: documentation: Added documentation " Reyad Attiyat 2014-06-21 10:57 ` Jonathan Cameron 2014-06-16 22:30 ` [PATCH v3 2/3] iio: types: Added support " Reyad Attiyat 2014-06-16 22:30 ` [PATCH v3 3/3] iio: hid-sensor-magn-3d: Add " Reyad Attiyat 2014-06-21 11:19 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).