[PATCH] iio:kxcjk-1013: Add support for SMO8500 device

[Bastien Nocera <hadess@hadess.net>]

The Onda v975w tablet contains an accelerometer that's advertised over
ACPI as SMO8500. This device is however a KXCJ9 accelerometer as
can be seen in the Windows driver's INF file, and from the etching on
the chipset ("KXCJ9 41566 0414").

This patch also removes the attempt to get the IRQ for the "data ready"
signal, as it does not seem to be supported by this device on this
platform.
---
 drivers/iio/accel/kxcjk-1013.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 98909a9..3b07e5f 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -108,6 +108,7 @@ struct kxcjk1013_data {
 	bool motion_trigger_on;
 	int64_t timestamp;
 	enum kx_chipset chipset;
+	bool is_smo8500_device;
 };
 
 enum kxcjk1013_axis {
@@ -1129,12 +1130,15 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
 }
 
 static const char *kxcjk1013_match_acpi_device(struct device *dev,
-					       enum kx_chipset *chipset)
+					       enum kx_chipset *chipset,
+					       bool *is_smo8500_device)
 {
 	const struct acpi_device_id *id;
 	id = acpi_match_device(dev->driver->acpi_match_table, dev);
 	if (!id)
 		return NULL;
+	if (strcmp (id->id, "SMO8500") == 0)
+		*is_smo8500_device = true;
 	*chipset = (enum kx_chipset)id->driver_data;
 
 	return dev_name(dev);
@@ -1149,6 +1153,8 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client,
 
 	if (!client)
 		return -EINVAL;
+	if (data->is_smo8500_device)
+		return -ENOTSUPP;
 
 	dev = &client->dev;
 
@@ -1198,7 +1204,8 @@ static int kxcjk1013_probe(struct i2c_client *client,
 		name = id->name;
 	} else if (ACPI_HANDLE(&client->dev)) {
 		name = kxcjk1013_match_acpi_device(&client->dev,
-						   &data->chipset);
+						   &data->chipset,
+						   &data->is_smo8500_device);
 	} else
 		return -ENODEV;
 
@@ -1397,6 +1404,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
+	{"SMO8500",  KXCJK1013},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
@@ -1405,6 +1413,7 @@ static const struct i2c_device_id kxcjk1013_id[] = {
 	{"kxcjk1013", KXCJK1013},
 	{"kxcj91008", KXCJ91008},
 	{"kxtj21009", KXTJ21009},
+	{"SMO8500",   KXCJK1013},
 	{}
 };
 
-- 
2.1.0