From: Octavian Purdila <octavian.purdila@intel.com>
To: linux-iio@vger.kernel.org
Cc: Octavian Purdila <octavian.purdila@intel.com>
Subject: [PATCH v2 10/11] iio: bmc150: introduce bmc150_accel_event
Date: Sun, 21 Dec 2014 02:42:35 +0200 [thread overview]
Message-ID: <1419122556-8100-11-git-send-email-octavian.purdila@intel.com> (raw)
In-Reply-To: <1419122556-8100-1-git-send-email-octavian.purdila@intel.com>
Add a separate structure for events and add the infrastructure to
support an arbitrary number of events. Each event is associated
with an interrupt and has an enabled/disabled state.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
---
drivers/iio/accel/bmc150-accel.c | 177 ++++++++++++++++++++++++++++++---------
1 file changed, 139 insertions(+), 38 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index cd2f5d9..14509be 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -163,21 +163,37 @@ struct bmc150_accel_trigger {
bool enabled;
};
+struct bmc150_accel_event {
+ struct bmc150_accel_interrupt *intr;
+ struct bmc150_accel_data *data;
+ enum iio_event_type type;
+ bool enabled;
+ int (*read)(struct bmc150_accel_event *event, enum iio_event_info info,
+ int *val, int *val2);
+ int (*write)(struct bmc150_accel_event *event, enum iio_event_info info,
+ int val, int val2);
+ union {
+ struct {
+ u32 duration;
+ u32 threshold;
+ } slope;
+ };
+};
+
#define BMC150_ACCEL_INTERRUPTS 2
#define BMC150_ACCEL_TRIGGERS 2
+#define BMC150_ACCEL_EVENTS 1
struct bmc150_accel_data {
struct i2c_client *client;
struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
atomic_t active_intr;
struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
+ struct bmc150_accel_event events[BMC150_ACCEL_EVENTS];
struct mutex mutex;
s16 buffer[8];
u8 bw_bits;
- u32 slope_dur;
- u32 slope_thres;
u32 range;
- int ev_enable_state;
int64_t timestamp;
const struct bmc150_accel_chip_info *chip_info;
};
@@ -287,7 +303,8 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val,
return -EINVAL;
}
-static int bmc150_accel_update_slope_threshold(struct bmc150_accel_data *data,
+static int bmc150_accel_update_slope_threshold(struct bmc150_accel_event *event,
+ struct bmc150_accel_data *data,
int val)
{
int ret = 0;
@@ -300,14 +317,15 @@ static int bmc150_accel_update_slope_threshold(struct bmc150_accel_data *data,
dev_err(&data->client->dev, "Error writing reg_int_6\n");
return ret;
}
- data->slope_thres = val;
+ event->slope.threshold = val;
dev_dbg(&data->client->dev, "%s: %x\n", __func__, val);
return ret;
}
-static int bmc150_accel_update_slope_duration(struct bmc150_accel_data *data,
+static int bmc150_accel_update_slope_duration(struct bmc150_accel_event *event,
+ struct bmc150_accel_data *data,
int val)
{
int ret;
@@ -326,7 +344,7 @@ static int bmc150_accel_update_slope_duration(struct bmc150_accel_data *data,
dev_err(&data->client->dev, "Error write reg_int_5\n");
return ret;
}
- data->slope_dur = val;
+ event->slope.duration = val;
dev_dbg(&data->client->dev, "%s: %x\n", __func__, val);
@@ -372,12 +390,12 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
data->range = BMC150_ACCEL_DEF_RANGE_4G;
/* Set default slope duration and thresholds */
- ret = bmc150_accel_update_slope_duration(data,
+ ret = bmc150_accel_update_slope_duration(&data->events[0], data,
BMC150_ACCEL_DEF_SLOPE_DURATION);
if (ret < 0)
return ret;
- ret = bmc150_accel_update_slope_threshold(data,
+ ret = bmc150_accel_update_slope_threshold(&data->events[0], data,
BMC150_ACCEL_DEF_SLOPE_THRESHOLD);
if (ret < 0)
return ret;
@@ -713,22 +731,30 @@ static int bmc150_accel_write_raw(struct iio_dev *indio_dev,
return ret;
}
-static int bmc150_accel_read_event(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir,
- enum iio_event_info info,
- int *val, int *val2)
+static struct bmc150_accel_event*
+bmc150_accel_get_event(struct iio_dev *indio_dev, enum iio_event_type type)
{
struct bmc150_accel_data *data = iio_priv(indio_dev);
+ int i;
+
+ for (i = 0; i < BMC150_ACCEL_EVENTS; i++)
+ if (data->events[i].type == type)
+ return &data->events[i];
+
+ return NULL;
+}
+static int bmc150_accel_event_roc_read(struct bmc150_accel_event *event,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
*val2 = 0;
switch (info) {
case IIO_EV_INFO_VALUE:
- *val = data->slope_thres;
+ *val = event->slope.threshold;
break;
case IIO_EV_INFO_PERIOD:
- *val = data->slope_dur;
+ *val = event->slope.duration;
break;
default:
return -EINVAL;
@@ -737,28 +763,40 @@ static int bmc150_accel_read_event(struct iio_dev *indio_dev,
return IIO_VAL_INT;
}
-static int bmc150_accel_write_event(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir,
- enum iio_event_info info,
- int val, int val2)
+static int bmc150_accel_read_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
{
- struct bmc150_accel_data *data = iio_priv(indio_dev);
- int ret;
+ struct bmc150_accel_event *event;
- if (data->ev_enable_state)
- return -EBUSY;
+ event = bmc150_accel_get_event(indio_dev, type);
+ if (!event || !event->read)
+ return -EINVAL;
+
+ return event->read(event, info, val, val2);
+}
+
+static int bmc150_accel_event_roc_write(struct bmc150_accel_event *event,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct bmc150_accel_data *data = event->data;
+ int ret;
switch (info) {
case IIO_EV_INFO_VALUE:
mutex_lock(&data->mutex);
- ret = bmc150_accel_update_slope_threshold(data, val);
+ ret = bmc150_accel_update_slope_threshold(event, event->data,
+ val);
mutex_unlock(&data->mutex);
break;
case IIO_EV_INFO_PERIOD:
mutex_lock(&data->mutex);
- ret = bmc150_accel_update_slope_duration(data, val);
+ ret = bmc150_accel_update_slope_duration(event, event->data,
+ val);
mutex_unlock(&data->mutex);
break;
default:
@@ -768,15 +806,37 @@ static int bmc150_accel_write_event(struct iio_dev *indio_dev,
return ret;
}
+static int bmc150_accel_write_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct bmc150_accel_event *event;
+
+ event = bmc150_accel_get_event(indio_dev, type);
+ if (!event || !event->write)
+ return -EINVAL;
+
+ if (event->enabled)
+ return -EBUSY;
+
+ return event->write(event, info, val, val2);
+}
+
static int bmc150_accel_read_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir)
{
+ struct bmc150_accel_event *event;
- struct bmc150_accel_data *data = iio_priv(indio_dev);
+ event = bmc150_accel_get_event(indio_dev, type);
+ if (!event)
+ return -EINVAL;
- return data->ev_enable_state;
+ return event->enabled;
}
static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
@@ -786,15 +846,20 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
int state)
{
struct bmc150_accel_data *data = iio_priv(indio_dev);
+ struct bmc150_accel_event *event;
int ret;
- if (state == data->ev_enable_state)
+ event = bmc150_accel_get_event(indio_dev, type);
+ if (!event)
+ return -EINVAL;
+
+ if (state == event->enabled)
return 0;
mutex_lock(&data->mutex);
- ret = bmc150_accel_set_interrupt(data, &data->interrupts[1], state);
+ ret = bmc150_accel_set_interrupt(data, event->intr, state);
if (!ret)
- data->ev_enable_state = state;
+ event->enabled = state;
mutex_unlock(&data->mutex);
return ret;
@@ -826,12 +891,14 @@ static const struct attribute_group bmc150_accel_attrs_group = {
.attrs = bmc150_accel_attributes,
};
-static const struct iio_event_spec bmc150_accel_event = {
+static const struct iio_event_spec bmc150_accel_events[BMC150_ACCEL_EVENTS] = {
+ {
.type = IIO_EV_TYPE_ROC,
.dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
+ },
};
#define BMC150_ACCEL_CHANNEL(_axis, bits) { \
@@ -848,8 +915,8 @@ static const struct iio_event_spec bmc150_accel_event = {
.storagebits = 16, \
.shift = 16 - (bits), \
}, \
- .event_spec = &bmc150_accel_event, \
- .num_event_specs = 1 \
+ .event_spec = bmc150_accel_events, \
+ .num_event_specs = ARRAY_SIZE(bmc150_accel_events) \
}
#define BMC150_ACCEL_CHANNELS(bits) { \
@@ -1091,7 +1158,7 @@ static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private)
}
}
- if (data->ev_enable_state)
+ if (data->events[0].enabled)
return IRQ_WAKE_THREAD;
else
return IRQ_HANDLED;
@@ -1203,6 +1270,38 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
return ret;
}
+static struct {
+ int intr;
+ enum iio_event_type type;
+ int (*read)(struct bmc150_accel_event *event, enum iio_event_info info,
+ int *val, int *val2);
+ int (*write)(struct bmc150_accel_event *event, enum iio_event_info info,
+ int val, int val2);
+} bmc150_accel_events_info[BMC150_ACCEL_EVENTS] = {
+ {
+ .intr = 1,
+ .type = IIO_EV_TYPE_ROC,
+ .read = bmc150_accel_event_roc_read,
+ .write = bmc150_accel_event_roc_write,
+ },
+};
+
+static void bmc150_accel_events_setup(struct iio_dev *indio_dev,
+ struct bmc150_accel_data *data)
+{
+ int i;
+
+ for (i = 0; i < BMC150_ACCEL_EVENTS; i++) {
+ int intr = bmc150_accel_events_info[i].intr;
+
+ data->events[i].intr = &data->interrupts[intr];
+ data->events[i].data = data;
+ data->events[i].type = bmc150_accel_events_info[i].type;
+ data->events[i].read = bmc150_accel_events_info[i].read;
+ data->events[i].write = bmc150_accel_events_info[i].write;
+ }
+}
+
static int bmc150_accel_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1277,6 +1376,8 @@ static int bmc150_accel_probe(struct i2c_client *client,
if (ret)
return ret;
+ bmc150_accel_events_setup(indio_dev, data);
+
ret = iio_triggered_buffer_setup(indio_dev,
&iio_pollfunc_store_time,
bmc150_accel_trigger_handler,
--
1.9.1
next prev parent reply other threads:[~2014-12-21 0:47 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-21 0:42 [PATCH v2 00/11] iio: add support for hardware buffers Octavian Purdila
2014-12-21 0:42 ` [PATCH v2 01/11] iio: buffer: fix custom buffer attributes copy Octavian Purdila
2015-01-04 11:25 ` Jonathan Cameron
2015-01-04 11:34 ` Lars-Peter Clausen
2015-01-04 16:11 ` Jonathan Cameron
2014-12-21 0:42 ` [PATCH v2 02/11] iio: buffer: refactor buffer attributes setup Octavian Purdila
2015-01-04 11:31 ` Jonathan Cameron
2015-01-05 10:48 ` Octavian Purdila
2014-12-21 0:42 ` [PATCH v2 03/11] iio: add watermark logic to iio read and poll Octavian Purdila
2015-01-04 15:44 ` Jonathan Cameron
2015-01-25 21:22 ` Hartmut Knaack
2015-01-26 9:40 ` Octavian Purdila
2014-12-21 0:42 ` [PATCH v2 04/11] iio: add support for hardware fifo Octavian Purdila
2015-01-04 16:07 ` Jonathan Cameron
2015-01-05 11:29 ` Octavian Purdila
2015-02-04 17:08 ` Jonathan Cameron
2015-02-05 21:36 ` Octavian Purdila
2015-02-08 10:53 ` Jonathan Cameron
2015-02-09 13:44 ` Octavian Purdila
2015-01-28 23:46 ` Hartmut Knaack
2015-01-29 11:38 ` Octavian Purdila
2015-01-29 22:49 ` Hartmut Knaack
2015-02-04 17:18 ` Jonathan Cameron
2015-02-04 17:11 ` Jonathan Cameron
2014-12-21 0:42 ` [PATCH v2 05/11] iio: bmc150: refactor slope duration and threshold update Octavian Purdila
2015-01-04 16:21 ` Jonathan Cameron
2015-01-06 18:53 ` Srinivas Pandruvada
2015-01-28 9:22 ` Octavian Purdila
2015-01-28 17:15 ` Srinivas Pandruvada
2014-12-21 0:42 ` [PATCH v2 06/11] iio: bmc150: refactor interrupt enabling Octavian Purdila
2015-01-04 16:27 ` Jonathan Cameron
2015-01-28 10:33 ` Octavian Purdila
2014-12-21 0:42 ` [PATCH v2 07/11] iio: bmc150: exit early if event / trigger state is not changed Octavian Purdila
2015-01-04 16:29 ` Jonathan Cameron
2014-12-21 0:42 ` [PATCH v2 08/11] iio: bmc150: introduce bmc150_accel_interrupt Octavian Purdila
2015-01-04 16:36 ` Jonathan Cameron
2015-01-28 11:09 ` Octavian Purdila
2015-01-28 13:20 ` Jonathan Cameron
2014-12-21 0:42 ` [PATCH v2 09/11] iio: bmc150: introduce bmc150_accel_trigger Octavian Purdila
2015-01-04 16:39 ` Jonathan Cameron
2014-12-21 0:42 ` Octavian Purdila [this message]
2015-01-04 16:49 ` [PATCH v2 10/11] iio: bmc150: introduce bmc150_accel_event Jonathan Cameron
2014-12-21 0:42 ` [PATCH v2 11/11] iio: bmc150: add support for hardware fifo Octavian Purdila
2015-01-04 17:08 ` Jonathan Cameron
2015-01-28 19:26 ` Octavian Purdila
2015-02-04 17:16 ` Jonathan Cameron
2015-02-04 20:18 ` Octavian Purdila
2015-02-05 11:20 ` Jonathan Cameron
2015-02-05 20:04 ` Octavian Purdila
2015-02-06 12:19 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419122556-8100-11-git-send-email-octavian.purdila@intel.com \
--to=octavian.purdila@intel.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).