From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Irina Tirdea To: Jonathan Cameron , linux-iio@vger.kernel.org, devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Irina Tirdea Subject: [PATCH 3/3] iio: magn: bmc150_magn: Add devicetree binding documentation Date: Fri, 17 Apr 2015 13:50:30 +0300 Message-Id: <1429267830-13681-4-git-send-email-irina.tirdea@intel.com> In-Reply-To: <1429267830-13681-1-git-send-email-irina.tirdea@intel.com> References: <1429267830-13681-1-git-send-email-irina.tirdea@intel.com> List-ID: Add binding documentation for Bosch BMC150 magnetometer. Signed-off-by: Irina Tirdea --- .../bindings/iio/magnetometer/bmc150_magn.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt new file mode 100644 index 0000000..4ed035c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -0,0 +1,20 @@ +* Bosch BMC150 magnetometer sensor + +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf + +Required properties: + + - compatible : should be "bosch,bmc150_magn" + - reg : the I2C address of the magnetometer + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +bmc150_magn@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + interrupt-gpio = <&gpio1 0 1>; +}; -- 1.9.1