From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH 2/8] iio: __iio_update_buffers: Slightly refactor scan mask memory management
Date: Wed, 13 May 2015 16:04:45 +0200 [thread overview]
Message-ID: <1431525891-19285-3-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1431525891-19285-1-git-send-email-lars@metafoo.de>
Add a small helper function iio_free_scan_mask() that takes a mask and
frees its memory if the scan masks for the device are dynamically
allocated, otherwise does nothing. This means we don't have to open-code
the same check over and over again in __iio_update_buffers.
Also free compound_mask as soon a we are done using it. This constrains its
usage to a specific region of the function will make further refactoring
and splitting the function into smaller sub-parts more easier.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/iio/industrialio-buffer.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 1f91031..2afe3db 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -575,6 +575,14 @@ static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev,
buffer->access->set_bytes_per_datum(buffer, bytes);
}
+static void iio_free_scan_mask(struct iio_dev *indio_dev,
+ const unsigned long *mask)
+{
+ /* If the mask is dynamically allocated free it, otherwise do nothing */
+ if (!indio_dev->available_scan_masks)
+ kfree(mask);
+}
+
static int __iio_update_buffers(struct iio_dev *indio_dev,
struct iio_buffer *insert_buffer,
struct iio_buffer *remove_buffer)
@@ -612,8 +620,7 @@ static int __iio_update_buffers(struct iio_dev *indio_dev,
/* If no buffers in list, we are done */
if (list_empty(&indio_dev->buffer_list)) {
indio_dev->currentmode = INDIO_DIRECT_MODE;
- if (indio_dev->available_scan_masks == NULL)
- kfree(old_mask);
+ iio_free_scan_mask(indio_dev, old_mask);
return 0;
}
@@ -621,8 +628,7 @@ static int __iio_update_buffers(struct iio_dev *indio_dev,
compound_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
sizeof(long), GFP_KERNEL);
if (compound_mask == NULL) {
- if (indio_dev->available_scan_masks == NULL)
- kfree(old_mask);
+ iio_free_scan_mask(indio_dev, old_mask);
return -ENOMEM;
}
indio_dev->scan_timestamp = 0;
@@ -637,6 +643,7 @@ static int __iio_update_buffers(struct iio_dev *indio_dev,
iio_scan_mask_match(indio_dev->available_scan_masks,
indio_dev->masklength,
compound_mask);
+ kfree(compound_mask);
if (indio_dev->active_scan_mask == NULL) {
/*
* Roll back.
@@ -648,7 +655,6 @@ static int __iio_update_buffers(struct iio_dev *indio_dev,
success = -EINVAL;
}
else {
- kfree(compound_mask);
ret = -EINVAL;
return ret;
}
@@ -721,10 +727,7 @@ static int __iio_update_buffers(struct iio_dev *indio_dev,
}
}
- if (indio_dev->available_scan_masks)
- kfree(compound_mask);
- else
- kfree(old_mask);
+ iio_free_scan_mask(indio_dev, old_mask);
return success;
@@ -736,8 +739,8 @@ error_run_postdisable:
error_remove_inserted:
if (insert_buffer)
iio_buffer_deactivate(insert_buffer);
+ iio_free_scan_mask(indio_dev, indio_dev->active_scan_mask);
indio_dev->active_scan_mask = old_mask;
- kfree(compound_mask);
return ret;
}
--
1.8.0
next prev parent reply other threads:[~2015-05-13 14:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-13 14:04 [PATCH 0/8] iio: Refactor __iio_update_buffers() Lars-Peter Clausen
2015-05-13 14:04 ` [PATCH 1/8] iio: Replace printk in __iio_update_buffers with dev_dbg Lars-Peter Clausen
2015-05-17 8:42 ` Jonathan Cameron
2015-05-13 14:04 ` Lars-Peter Clausen [this message]
2015-05-17 8:48 ` [PATCH 2/8] iio: __iio_update_buffers: Slightly refactor scan mask memory management Jonathan Cameron
2015-05-13 14:04 ` [PATCH 3/8] iio: __iio_update_buffers: Perform request_update() only for new buffers Lars-Peter Clausen
2015-05-17 9:01 ` Jonathan Cameron
2015-05-13 14:04 ` [PATCH 4/8] iio: __iio_update_buffers: Update mode before preenable/after postdisable Lars-Peter Clausen
2015-05-17 9:10 ` Jonathan Cameron
2015-05-17 11:38 ` Lars-Peter Clausen
2015-05-17 11:44 ` Jonathan Cameron
2015-05-13 14:04 ` [PATCH 5/8] iio: __iio_update_buffers: Verify configuration before starting to apply it Lars-Peter Clausen
2015-05-17 9:14 ` Jonathan Cameron
2015-05-13 14:04 ` [PATCH 6/8] iio: __iio_update_buffers: Split enable and disable path into helper functions Lars-Peter Clausen
2015-05-17 9:17 ` Jonathan Cameron
2015-05-13 14:04 ` [PATCH 7/8] iio: __iio_update_buffers: Leave device in sane state on error Lars-Peter Clausen
2015-05-17 9:22 ` Jonathan Cameron
2015-05-13 14:04 ` [PATCH 8/8] DO NOT APPLY! __iio_update_buffers error path testing Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431525891-19285-3-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).