[PATCH 2/5] iio: adis16400: Use != channel indices for the two voltage channels

[Lars-Peter Clausen <lars@metafoo.de>]

From: Paul Cercueil <paul.cercueil@analog.com>

Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 drivers/iio/imu/adis16400_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index 8de6427..7b63788 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -459,10 +459,10 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
-#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si) { \
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
-	.channel = 0, \
+	.channel = chn, \
 	.extend_name = name, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
@@ -479,10 +479,10 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 }
 
 #define ADIS16400_SUPPLY_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
 
 #define ADIS16400_AUX_ADC_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
 
 #define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
 	.type = IIO_ANGL_VEL, \
-- 
1.8.0