From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Stefan Agner To: jic23@kernel.org, shawn.guo@linaro.org, kernel@pengutronix.de Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, B38611@freescale.com, maitysanchayan@gmail.com, devicetree@vger.kernel.org, linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH v5 0/2] iio: adc: vf610: respect ADC clocking limitations Date: Wed, 27 May 2015 14:47:50 +0200 Message-Id: <1432730872-14325-1-git-send-email-stefan@agner.ch> List-ID: This revision is basically the same as v4, just some wording improvements. I would appriciate an Ack for the device tree part. The clock limit values are defined in the data sheet and could be different per SoC, hence descirbe the hardware limitation... Changes since v4: - Remove fussy english - Drop "iio: adc: vf610: use ADC clock within specification" since that patch is already applied Changes since v3: - Move device tree bindings to driver changes Changes since v2: - Add sysfs ABI documentation - Fix commit message spelling errors Changes since v1: - Use ext_info for conversion mode Stefan Agner (2): iio: adc: vf610: implement configurable conversion modes ARM: dts: add property for maximum ADC clock frequencies Documentation/ABI/testing/sysfs-bus-iio-vf610 | 7 + .../devicetree/bindings/iio/adc/vf610-adc.txt | 9 ++ arch/arm/boot/dts/vfxxx.dtsi | 4 + drivers/iio/adc/vf610_adc.c | 146 +++++++++++++++------ 4 files changed, 124 insertions(+), 42 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-vf610 -- 2.4.1