From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from devils.ext.ti.com ([198.47.26.153]:45142 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751685AbbGBW2r (ORCPT ); Thu, 2 Jul 2015 18:28:47 -0400 From: Andreas Dannenberg To: , CC: Andreas Dannenberg Subject: [PATCH v3 2/2] iio: light: opt3001: Add device tree binding documentation Date: Thu, 2 Jul 2015 17:27:59 -0500 Message-ID: <1435876079-26287-3-git-send-email-dannenberg@ti.com> In-Reply-To: <1435876079-26287-1-git-send-email-dannenberg@ti.com> References: <1435876079-26287-1-git-send-email-dannenberg@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org Signed-off-by: Andreas Dannenberg --- .../devicetree/bindings/iio/light/opt3001.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt new file mode 100644 index 0000000..d5f0765 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt @@ -0,0 +1,18 @@ +* Texas Instruments OPT3001 Ambient Light Sensor + +http://www.ti.com/product/opt3001 + +Required properties: + - compatible: should be "ti,opt3001" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) + +Example: + +opt3001@44 { + compatible = "ti,opt3001"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +}; -- 1.9.1