From: Giuseppe Barba <giuseppe.barba@st.com>
To: <linux-iio@vger.kernel.org>
Cc: <denis.ciocca@st.com>, <jic23@kernel.org>,
Giuseppe Barba <giuseppe.barba@st.com>
Subject: [PATCH V3 4/5] iio: st-accel: add support for lsm303agr accelerometer
Date: Tue, 21 Jul 2015 10:14:19 +0200 [thread overview]
Message-ID: <1437466460-14412-5-git-send-email-giuseppe.barba@st.com> (raw)
In-Reply-To: <1437466460-14412-1-git-send-email-giuseppe.barba@st.com>
This adds support for the lsm303agr accelerometer.
Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
---
Documentation/devicetree/bindings/iio/st-sensors.txt | 1 +
drivers/iio/accel/st_accel.h | 1 +
drivers/iio/accel/st_accel_core.c | 1 +
drivers/iio/accel/st_accel_i2c.c | 5 +++++
drivers/iio/accel/st_accel_spi.c | 1 +
5 files changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 8a6be3b..d80bdaa 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -35,6 +35,7 @@ Accelerometers:
- st,lsm303dl-accel
- st,lsm303dlm-accel
- st,lsm330-accel
+- st,lsm303agr-accel
Gyroscopes:
- st,l3g4200d-gyro
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index aa10019..468f21f 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -26,6 +26,7 @@
#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
/**
* struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 12b42f6..ff30f88 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -233,6 +233,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
[2] = LSM330D_ACCEL_DEV_NAME,
[3] = LSM330DL_ACCEL_DEV_NAME,
[4] = LSM330DLC_ACCEL_DEV_NAME,
+ [5] = LSM303AGR_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index a2f1c20..8b9cc84 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -68,6 +68,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lsm330-accel",
.data = LSM330_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lsm303agr-accel",
+ .data = LSM303AGR_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -116,6 +120,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LSM303DL_ACCEL_DEV_NAME },
{ LSM303DLM_ACCEL_DEV_NAME },
{ LSM330_ACCEL_DEV_NAME },
+ { LSM303AGR_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 12ec293..54b61a3 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -57,6 +57,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LSM303DL_ACCEL_DEV_NAME },
{ LSM303DLM_ACCEL_DEV_NAME },
{ LSM330_ACCEL_DEV_NAME },
+ { LSM303AGR_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);
--
1.9.1
next prev parent reply other threads:[~2015-07-21 8:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 8:14 [PATCH V3 0/5] Added ST LSM303AGR sensor Giuseppe Barba
2015-07-21 8:14 ` [PATCH V3 1/5] iio: st-sensors: add configuration for WhoAmI address Giuseppe Barba
2015-07-21 8:14 ` [PATCH V3 2/5] iio: st-sensors: add support for single full scale device Giuseppe Barba
2015-07-21 8:14 ` [PATCH V3 3/5] iio: st_magn: Add irq trigger handling Giuseppe Barba
2015-07-21 8:14 ` Giuseppe Barba [this message]
2015-07-21 8:14 ` [PATCH V3 5/5] iio: st-magn: add support for lsm303agr magnetometer Giuseppe Barba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437466460-14412-5-git-send-email-giuseppe.barba@st.com \
--to=giuseppe.barba@st.com \
--cc=denis.ciocca@st.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).