[PATCH 19/20] iio: bmc150: Split the driver into core and i2c

[Markus Pargmann <mpa@pengutronix.de>]

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 drivers/iio/accel/Kconfig                          |  22 +++--
 drivers/iio/accel/Makefile                         |   3 +-
 .../accel/{bmc150-accel.c => bmc150-accel-core.c}  |  95 ++++---------------
 drivers/iio/accel/bmc150-accel-i2c.c               | 101 +++++++++++++++++++++
 drivers/iio/accel/bmc150-accel.h                   |  21 +++++
 5 files changed, 156 insertions(+), 86 deletions(-)
 rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (95%)
 create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
 create mode 100644 drivers/iio/accel/bmc150-accel.h

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 01dd03d194d1..c63e981c38ff 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -18,22 +18,30 @@ config BMA180
 	  module will be called bma180.
 
 config BMC150_ACCEL
-	tristate "Bosch BMC150 Accelerometer Driver"
-	depends on I2C
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
+	bool "Bosch BMC150 Accelerometer Driver"
 	select REGMAP
-	select REGMAP_I2C
 	help
 	  Say yes here to build support for the following Bosch accelerometers:
 	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
 
-	  Currently this only supports the device via an i2c interface.
-
 	  This is a combo module with both accelerometer and magnetometer.
 	  This driver is only implementing accelerometer part, which has
 	  its own address and register map.
 
+if BMC150_ACCEL
+
+config BMC150_ACCEL_I2C
+	tristate "I2C support"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for I2C communication with the
+	  mentioned accelerometer.
+
+endif
+
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index ebd2675b2a02..5ef8bdbad092 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -4,7 +4,8 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_BMA180) += bma180.o
-obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o
+obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
+obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
 obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel-core.c
similarity index 95%
rename from drivers/iio/accel/bmc150-accel.c
rename to drivers/iio/accel/bmc150-accel-core.c
index d75e1b0aa7e9..8cf2786dd433 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -37,6 +37,8 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
 
+#include "bmc150-accel.h"
+
 #define BMC150_ACCEL_DRV_NAME			"bmc150_accel"
 #define BMC150_ACCEL_IRQ_NAME			"bmc150_accel_event"
 #define BMC150_ACCEL_GPIO_NAME			"bmc150_accel_int"
@@ -187,7 +189,6 @@ enum bmc150_accel_trigger_id {
 struct bmc150_accel_data {
 	struct regmap *regmap;
 	struct device *dev;
-	int irq;
 	struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
 	atomic_t active_intr;
 	struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
@@ -201,6 +202,7 @@ struct bmc150_accel_data {
 	int ev_enable_state;
 	int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
 	const struct bmc150_accel_chip_info *chip_info;
+	int irq;
 };
 
 static const struct {
@@ -1076,15 +1078,6 @@ static const struct iio_chan_spec bmc150_accel_channels[] =
 static const struct iio_chan_spec bma280_accel_channels[] =
 	BMC150_ACCEL_CHANNELS(14);
 
-enum {
-	bmc150,
-	bmi055,
-	bma255,
-	bma250e,
-	bma222e,
-	bma280,
-};
-
 static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 	[bmc150] = {
 		.chip_id = 0xFA,
@@ -1573,36 +1566,22 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
 	.postdisable = bmc150_accel_buffer_postdisable,
 };
 
-static int bmc150_accel_probe(struct i2c_client *client,
-			      const struct i2c_device_id *id)
+int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			    const char *name, int chip_id, bool block_supported)
 {
 	struct bmc150_accel_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
-	const char *name = NULL;
-	int chip_id = 0;
-	struct device *dev;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
-	i2c_set_clientdata(client, indio_dev);
-	data->dev = &client->dev;
-	dev = &client->dev;
-	data->irq = client->irq;
-
-	data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
-	if (IS_ERR(data->regmap)) {
-		dev_err(dev, "Failed to initialize i2c regmap\n");
-		return PTR_ERR(data->regmap);
-	}
-
-	if (id) {
-		name = id->name;
-		chip_id = id->driver_data;
-	}
+	dev_set_drvdata(dev, indio_dev);
+	data->dev = dev;
+	data->irq = irq;
+	data->regmap = regmap;
 
 	if (ACPI_HANDLE(dev))
 		name = bmc150_accel_match_acpi_device(dev, &chip_id);
@@ -1664,9 +1643,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
 		if (ret)
 			goto err_buffer_cleanup;
 
-		if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
-		    i2c_check_functionality(client->adapter,
-					    I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		if (block_supported) {
 			indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
 			indio_dev->info = &bmc150_accel_info_fifo;
 			indio_dev->buffer->attrs = bmc150_accel_fifo_attributes;
@@ -1675,7 +1652,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0) {
-		dev_err(data->dev, "Unable to register iio device\n");
+		dev_err(dev, "Unable to register iio device\n");
 		goto err_trigger_unregister;
 	}
 
@@ -1698,10 +1675,11 @@ err_buffer_cleanup:
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(bmc150_accel_core_probe);
 
-static int bmc150_accel_remove(struct i2c_client *client)
+int bmc150_accel_core_remove(struct device *dev)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmc150_accel_data *data = iio_priv(indio_dev);
 
 	pm_runtime_disable(data->dev);
@@ -1720,6 +1698,7 @@ static int bmc150_accel_remove(struct i2c_client *client)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bmc150_accel_core_remove);
 
 #ifdef CONFIG_PM_SLEEP
 static int bmc150_accel_suspend(struct device *dev)
@@ -1790,48 +1769,8 @@ static int bmc150_accel_runtime_resume(struct device *dev)
 }
 #endif
 
-static const struct dev_pm_ops bmc150_accel_pm_ops = {
+const struct dev_pm_ops bmc150_accel_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
 	SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
 			   bmc150_accel_runtime_resume, NULL)
 };
-
-static const struct acpi_device_id bmc150_accel_acpi_match[] = {
-	{"BSBA0150",	bmc150},
-	{"BMC150A",	bmc150},
-	{"BMI055A",	bmi055},
-	{"BMA0255",	bma255},
-	{"BMA250E",	bma250e},
-	{"BMA222E",	bma222e},
-	{"BMA0280",	bma280},
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
-
-static const struct i2c_device_id bmc150_accel_id[] = {
-	{"bmc150_accel",	bmc150},
-	{"bmi055_accel",	bmi055},
-	{"bma255",		bma255},
-	{"bma250e",		bma250e},
-	{"bma222e",		bma222e},
-	{"bma280",		bma280},
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
-
-static struct i2c_driver bmc150_accel_driver = {
-	.driver = {
-		.name	= BMC150_ACCEL_DRV_NAME,
-		.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
-		.pm	= &bmc150_accel_pm_ops,
-	},
-	.probe		= bmc150_accel_probe,
-	.remove		= bmc150_accel_remove,
-	.id_table	= bmc150_accel_id,
-};
-module_i2c_driver(bmc150_accel_driver);
-
-MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("BMC150 accelerometer driver");
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
new file mode 100644
index 000000000000..7e036e2eb077
--- /dev/null
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -0,0 +1,101 @@
+/*
+ * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips:
+ *  - BMC150
+ *  - BMI055
+ *  - BMA255
+ *  - BMA250E
+ *  - BMA222E
+ *  - BMA280
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+
+#include "bmc150-accel.h"
+
+static const struct regmap_config bmc150_i2c_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.use_single_rw = true,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int bmc150_accel_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	bool block_supported =
+		i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
+		i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK);
+
+	regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to initialize i2c regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	return bmc150_accel_core_probe(&client->dev, regmap, client->irq,
+				       id->name, id->driver_data,
+				       block_supported);
+}
+
+static int bmc150_accel_remove(struct i2c_client *client)
+{
+	return bmc150_accel_core_remove(&client->dev);
+}
+
+static const struct acpi_device_id bmc150_accel_acpi_match[] = {
+	{"BSBA0150",	bmc150},
+	{"BMC150A",	bmc150},
+	{"BMI055A",	bmi055},
+	{"BMA0255",	bma255},
+	{"BMA250E",	bma250e},
+	{"BMA222E",	bma222e},
+	{"BMA0280",	bma280},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
+
+static const struct i2c_device_id bmc150_accel_id[] = {
+	{"bmc150_accel",	bmc150},
+	{"bmi055_accel",	bmi055},
+	{"bma255",		bma255},
+	{"bma250e",		bma250e},
+	{"bma222e",		bma222e},
+	{"bma280",		bma280},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
+
+static struct i2c_driver bmc150_accel_driver = {
+	.driver = {
+		.name	= "bmc150_accel_i2c",
+		.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
+		.pm	= &bmc150_accel_pm_ops,
+	},
+	.probe		= bmc150_accel_probe,
+	.remove		= bmc150_accel_remove,
+	.id_table	= bmc150_accel_id,
+};
+module_i2c_driver(bmc150_accel_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
new file mode 100644
index 000000000000..988b57573d0c
--- /dev/null
+++ b/drivers/iio/accel/bmc150-accel.h
@@ -0,0 +1,21 @@
+#ifndef _BMC150_ACCEL_H_
+#define _BMC150_ACCEL_H_
+
+struct regmap;
+
+enum {
+	bmc150,
+	bmi055,
+	bma255,
+	bma250e,
+	bma222e,
+	bma280,
+};
+
+int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			    const char *name, int chip_id,
+			    bool block_supported);
+int bmc150_accel_core_remove(struct device *dev);
+extern const struct dev_pm_ops bmc150_accel_pm_ops;
+
+#endif  /* _BMC150_ACCEL_H_ */
-- 
2.4.6