From: Markus Pargmann <mpa@pengutronix.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Vlad Dogaru <vlad.dogaru@intel.com>,
Paul Bolle <pebolle@tiscali.nl>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@pengutronix.de, Markus Pargmann <mpa@pengutronix.de>
Subject: [PATCH v3 3/6] iio: bmg160: Use generic dev_drvdata
Date: Wed, 12 Aug 2015 16:50:06 +0200 [thread overview]
Message-ID: <1439391009-6051-4-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1439391009-6051-1-git-send-email-mpa@pengutronix.de>
i2c_get_clientdata() is specifically for i2c. Replace it with the
generic dev_get/set_drvdata() to support different protocols.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
drivers/iio/gyro/bmg160.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
index 4701ea17baea..6eab91ba8977 100644
--- a/drivers/iio/gyro/bmg160.c
+++ b/drivers/iio/gyro/bmg160.c
@@ -1020,7 +1020,7 @@ static int bmg160_probe(struct i2c_client *client,
return -ENOMEM;
data = iio_priv(indio_dev);
- i2c_set_clientdata(client, indio_dev);
+ dev_set_drvdata(&client->dev, indio_dev);
data->dev = &client->dev;
ret = bmg160_chip_init(data);
@@ -1154,7 +1154,7 @@ static int bmg160_remove(struct i2c_client *client)
#ifdef CONFIG_PM_SLEEP
static int bmg160_suspend(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
@@ -1166,7 +1166,7 @@ static int bmg160_suspend(struct device *dev)
static int bmg160_resume(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
@@ -1182,7 +1182,7 @@ static int bmg160_resume(struct device *dev)
#ifdef CONFIG_PM
static int bmg160_runtime_suspend(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
@@ -1197,7 +1197,7 @@ static int bmg160_runtime_suspend(struct device *dev)
static int bmg160_runtime_resume(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
--
2.4.6
next prev parent reply other threads:[~2015-08-12 14:50 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 14:50 [PATCH v3 0/6] iio: bmg160: Add SPI connection Markus Pargmann
2015-08-12 14:50 ` [PATCH v3 1/6] iio: bmg160: Use i2c regmap instead of direct i2c access Markus Pargmann
2015-08-12 16:01 ` Srinivas Pandruvada
2015-08-15 14:41 ` Jonathan Cameron
2015-08-15 14:43 ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 2/6] iio: bmg160: Remove i2c_client from data struct Markus Pargmann
2015-08-12 16:03 ` Srinivas Pandruvada
2015-08-15 14:50 ` Jonathan Cameron
2015-08-12 14:50 ` Markus Pargmann [this message]
2015-08-12 16:05 ` [PATCH v3 3/6] iio: bmg160: Use generic dev_drvdata Srinivas Pandruvada
2015-08-15 14:50 ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 4/6] iio: bmg160: Remove remaining uses of i2c_client Markus Pargmann
2015-08-12 16:08 ` Srinivas Pandruvada
2015-08-15 14:53 ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 5/6] iio: bmg160: Separate i2c and core driver Markus Pargmann
2015-08-12 16:16 ` Srinivas Pandruvada
2015-08-15 14:59 ` Jonathan Cameron
2015-08-12 14:50 ` [PATCH v3 6/6] iio: bmg160: Add SPI driver Markus Pargmann
2015-08-12 15:19 ` Peter Meerwald
2015-08-15 15:03 ` Jonathan Cameron
2015-08-17 6:41 ` Markus Pargmann
2015-08-17 6:39 ` Markus Pargmann
2015-08-12 15:04 ` [PATCH v3 0/6] iio: bmg160: Add SPI connection Lars-Peter Clausen
2015-08-15 14:49 ` Jonathan Cameron
2015-08-17 9:27 ` Tirdea, Irina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439391009-6051-4-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pebolle@tiscali.nl \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=vlad.dogaru@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).