From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:48133 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932597AbbLNNy5 (ORCPT ); Mon, 14 Dec 2015 08:54:57 -0500 From: Markus Pargmann To: Shawn Guo , Dmitry Torokhov , Jonathan Cameron , Lee Jones Cc: Denis Carikli , =?UTF-8?q?Eric=20B=C3=A9nard?= , Sascha Hauer , devicetree@vger.kernel.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Hartmut Knaack , Fabio Estevam , Markus Pargmann Subject: [PATCH v10 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller Date: Mon, 14 Dec 2015 14:53:49 +0100 Message-Id: <1450101234-2191-4-git-send-email-mpa@pengutronix.de> In-Reply-To: <1450101234-2191-1-git-send-email-mpa@pengutronix.de> References: <1450101234-2191-1-git-send-email-mpa@pengutronix.de> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org This is the touchscreen conversion queue binding documentation. It uses the shared imx25 ADC. Signed-off-by: Markus Pargmann --- Notes: Changes in v9: - Updated binding descriptions Changes in v5: - Fix signed/unsigned comparison - Fix unused variable settling_time by putting it in the correct argument list - Use continous conversion queue with the repeat feature and a proper repeat-wait. Previously the touchscreen caused massive number of interrupts. .../bindings/input/touchscreen/fsl-mx25-tcq.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt new file mode 100644 index 000000000000..cdf05f9b2329 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt @@ -0,0 +1,35 @@ +Freescale mx25 TS conversion queue module + +mx25 touchscreen conversion queue module which controls the ADC unit of the +mx25 for attached touchscreens. + +Required properties: + - compatible: Should be "fsl,imx25-tcq". + - reg: Memory range of the device. + - interrupts: Should be the interrupt number associated with this module within + the tscadc unit (<0>). + - interrupt-parent: Should be a phandle to the tscadc unit. + - fsl,wires: Should be '<4>' or '<5>' + +Optional properties: + - fsl,pen-debounce-ns: Pen debounce time in nanoseconds. + - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value + between 1 and 4096. It is the ratio between the internal reference voltage + and the measured voltage after the plate was precharged. Resistence between + plates and therefore the voltage decreases with pressure so that a smaller + value is equivalent to a higher pressure. + - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before + the actual touch detection to wait for an even charge distribution in the + plate. + +This device includes two conversion queues which can be added as subnodes. +The first queue is for the touchscreen, the second for general purpose ADC. + +Example: + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <0>; + fsl,wires = <4>; + }; -- 2.6.2