From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-iio@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
Angelo Compagnucci <angelo.compagnucci@gmail.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald <pmeerw@pmeerw.net>
Subject: [PATCH] iio: adc: mcp3422: Add support for MCP3425
Date: Fri, 25 Dec 2015 02:11:07 +0900 [thread overview]
Message-ID: <1450977067-30639-1-git-send-email-akinobu.mita@gmail.com> (raw)
The MCP3425 is a single channel up to 16-bit A/D converter which has
features:
- On-Board Programmable Gain Amplifier (PGA):
- Gains of 1, 2, 4 or 8
- Programmable Data Rate Options:
- 15 SPS (16 bits), 60 SPS (14 bits), 240 SPS (12 bits)
So we can support MCP3425 with a little changes to mcp3422 driver.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
---
Documentation/devicetree/bindings/iio/adc/mcp3422.txt | 1 +
drivers/iio/adc/Kconfig | 4 ++--
drivers/iio/adc/mcp3422.c | 16 +++++++++++++---
3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
index 333139c..84289bd 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
@@ -5,6 +5,7 @@ Required properties:
"microchip,mcp3422" or
"microchip,mcp3423" or
"microchip,mcp3424" or
+ "microchip,mcp3425" or
"microchip,mcp3426" or
"microchip,mcp3427" or
"microchip,mcp3428"
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7868c74..e4b1de9 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,11 +246,11 @@ config MCP320X
called mcp320x.
config MCP3422
- tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
+ tristate "Microchip Technology MCP3422/3/4/5/6/7/8 driver"
depends on I2C
help
Say yes here to build support for Microchip Technology's
- MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+ MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
analog to digital converters.
This driver can also be built as a module. If so, the module will be
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 3555122..ba0c3ad 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -1,11 +1,12 @@
/*
- * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
+ * mcp3422.c - driver for the Microchip mcp3422/3/4/5/6/7/8 chip family
*
* Copyright (C) 2013, Angelo Compagnucci
* Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
* Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
* http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf
*
* This driver exports the value of analog input voltage to sysfs, the
* voltage unit is nV.
@@ -317,6 +318,10 @@ static const struct iio_chan_spec mcp3424_channels[] = {
MCP3422_CHAN(3),
};
+static const struct iio_chan_spec mcp3425_channels[] = {
+ MCP3422_CHAN(0),
+};
+
static const struct iio_info mcp3422_info = {
.read_raw = mcp3422_read_raw,
.write_raw = mcp3422_write_raw,
@@ -352,6 +357,10 @@ static int mcp3422_probe(struct i2c_client *client,
indio_dev->info = &mcp3422_info;
switch (adc->id) {
+ case 5:
+ indio_dev->channels = mcp3425_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mcp3425_channels);
+ break;
case 2:
case 3:
case 6:
@@ -368,7 +377,7 @@ static int mcp3422_probe(struct i2c_client *client,
/* meaningful default configuration */
config = (MCP3422_CONT_SAMPLING
- | MCP3422_CHANNEL_VALUE(1)
+ | MCP3422_CHANNEL_VALUE(0)
| MCP3422_PGA_VALUE(MCP3422_PGA_1)
| MCP3422_SAMPLE_RATE_VALUE(MCP3422_SRATE_240));
mcp3422_update_config(adc, config);
@@ -386,6 +395,7 @@ static const struct i2c_device_id mcp3422_id[] = {
{ "mcp3422", 2 },
{ "mcp3423", 3 },
{ "mcp3424", 4 },
+ { "mcp3425", 5 },
{ "mcp3426", 6 },
{ "mcp3427", 7 },
{ "mcp3428", 8 },
@@ -412,5 +422,5 @@ static struct i2c_driver mcp3422_driver = {
module_i2c_driver(mcp3422_driver);
MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
+MODULE_DESCRIPTION("Microchip mcp3422/3/4/5/6/7/8 driver");
MODULE_LICENSE("GPL v2");
--
1.9.1
next reply other threads:[~2015-12-24 17:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-24 17:11 Akinobu Mita [this message]
2015-12-24 22:23 ` [PATCH] iio: adc: mcp3422: Add support for MCP3425 Peter Meerwald-Stadler
2015-12-25 15:04 ` Akinobu Mita
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450977067-30639-1-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=angelo.compagnucci@gmail.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox