From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Jonathan Cameron To: linux-iio@vger.kernel.org Cc: Jonathan Cameron , lars-Peter Clausen Subject: [PATCH] iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. Date: Fri, 1 Jan 2016 18:05:34 +0000 Message-Id: <1451671534-23708-1-git-send-email-jic23@kernel.org> List-ID: Whilst this part has a hardware buffer, the identifcation that IIO cares about is the userspace facing end. It this case we push individual elements from the hardware fifo into the software interface (specifically a kfifo) rather than providing direct reads through to a hardware buffer (as we still do in the sca3000 for example). Technically the original specification as a hardware buffer could be considered wrong, but it didn't matter until the patch listed below. Result is that any attempt to enable the buffer will return -EINVAL Fixes: 225d59adf1c8 ("iio: Specify supported modes for buffers") Cc: lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 942320e32753..c1e05532d437 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -289,7 +289,7 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev, goto error_kfifo_free; indio_dev->setup_ops = setup_ops; - indio_dev->modes |= INDIO_BUFFER_HARDWARE; + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; return 0; -- 2.6.4